|
|
Multifunctional building
Růžička, Antonín ; Třeštíková, Jana (referee) ; Berková, Petra (advisor)
Diploma thesis Multifunctional building is compiled in the form of project documentation. The building is located in Brno, Vinařská street. It´s a building with four overground floors designed primarily to housing and one underground floor, which is mainly used as collective garage. The building will be made from POROTHERM blocks with the mineral heat insulation. The ceilings will be made of reinforced concrete. The building has a single-layer flat roof.
|
|
|
Apartment Building
Hrůza, Jan ; Hovořák, Dalibor (referee) ; Hlavačka, Tomáš (advisor)
The apartment building is located in Brno, Vojtova street. It´s a building with four overground floors and one underground floor, which is mainly used as collective garage. As a structural system is used reinforced concrete skeleton. The building has a single-layer flat roof.
|
|
|
Hotel "U Prehrady"
Černý, Dávid ; Nováková, Eva (referee) ; Kolář, Radim (advisor)
The subject of this diploma thesis was to process the study and the design documentation for a newly built hotel in Brno, in city district “Kníničky” near the artificial dam “Přehrada” in a rest area. The hotel will serve as temporary accommodation for up to 64 hotel guests in single, double and four bed rooms. The object also contains training rooms, offices, a meeting room, a café, a small grocery store and a restaurant with kitchen. Parking is possible in one of the two mass garages and there is an outdoor parking possibility in front of the hotel too. The building has a cast-in-place concrete frame with longitudinal beams and sway bracings. The external wall consists of aerated concrete bricks with contact thermal insulation system ETICS (insulation material mineral wool), the ceilings will be cast-in-place reinforced concrete ceilings and the roof flat green roof or flat roof with gravel on it above the 5th floor. The foundation construction consists of reinforced concrete foundation strips, which expand to foundation pads under the load-bearing columns and will be supported by piled foundations under the most exposed elements. As long as the hotel is situated into a fairly steep slope, the vertical alignment of some building parts is various so part of the project is the design of landscaping works. Design documentation was processed using the program AutoCAD 2017, the study and the visualization using both SketchUp 2015, LayOut 2015 and Lumion 5.
|
|
|
Residential building
Soška, Tomáš ; Jelínek, Petr (referee) ; Vajkay, František (advisor)
Diploma thesis "Residential building" is handleded in the form project documentation. It is a five-story building, the basement. The building is divided into two sections. The supporting structure of the building is monolithic frame with masonry infill. The building is located in a slightly sloping terrain. The entire building is covered by a flat roof. Individual residential units are located in the second, third, fourth and fifth floors. On the first floor there are two multiple garages, storage rooms, utility room and entrance tickets. Parts thesis are specialist in TZB and concrete structures.
|
|
|
Hotel
Paulová, Iva ; Blažková, Vendula (referee) ; Daněk, Lukáš (advisor)
The aim of this master‘s thesis is the elaboration of design documentation for the construction of a hotel. The proposed detached building is located on plots in the cadastre unit of Jihlava (659673). This is a public building intended for short-term accommodation and catering. Part of the construction is a connection to the technical and transport infrastructure, specific to the locality. The building is designed as a fourteen-story building with three underground and eleven floors above ground. The floor plan shape of the object is composed of rectangles. The dominant feature are two prominent towers with ten floors above ground. There are collective garages for cars in the underground floors. The ground floor is shared by the guests and the hotel staff. The restaurant, gym, conference hall and administration are located here. The second to eleventh floor above ground contains accommodation units for guests. Excavation work is designed by thrust excavation of the construction pit. The foundation structures are designed with a foundation slab made of hydraulic reinforced concrete with deep piled foundations. In the underground floors and on the ground floor, the construction system is cast-in-place concrete frame. In the second to eleventh floor above ground, the structural system is a two-way wall systeme. The vertical supporting structures are cast-in-place reinforced concrete. The horizontal load-bearing structures and the two-armed staircases are cast-in-place reinforced concrete. The contact thermal insulation system ensures thermal insulation of the building. The building is roofed in two levels with a warm flat roof.
|
|
|
Apartment building in Třebíč
Kašík, Vojtěch ; Woytela, Jindřich (referee) ; Sukopová, Dáša (advisor)
The theme of the bachelor thesis the elaboration of design documents for a siting permit. The apartment building is in a sloping terrain. The building itself is composed of one ground floor, which is underneath the level of terrain and three stories above the ground. The footing of the building is made from unreinforced concrete and the load-bearing wall are made from ceramic blocks. The system of insulation is thermal contact insulation. The horizontal roof construction is made of steel reinforced concrete panels. The roof itself is flat and single-skinned. On the ground floor, we can find a garage, storage rooms, utility room a baby-carrier storage. There are four appartement unit on the first two floors. On the last floor, we can find 2 appartement units, which in total adds up to 10 appartement for the whole building. In front of the building, we can find a parking lot.
|
|
|
Apartment house
Černý, Martin ; Hrochová, Žaneta (referee) ; Sedláková, Markéta (advisor)
The subject of the bachelor's thesis is the design of an apartment building in Humpolec. It is an apartment building, which has four floors above ground and one underground floor. On the first floor part of the house is designed for administration. The building is built on a slightly sloping terrain and is free-standing. Main entrance with entrance to the collective garage is situated to the southwest, where the existing access road is. Nine different housing units are designed. The construction system is made of ground ceramic blocks. The ceilings are made of prestressed panels and the roof is single skin. The work contains project documentation of the actual implementation.
|
|
|
The Commercial-administrative Center in Chomutov
Konárek, Lukáš ; Soudek, Pavel (referee) ; Kalousek, Lubor (advisor)
Diploma thesis deal with New building of The Commercial-administrative center in Chomutov. The Center has common basement and overground part is created from three separated buildings. These buildings are designed to create an atrium between them and sidewalk follow-up to adjacent sidewalks. Western building has two above ground floor, which they offer administrative place. Other two buildings are one above ground floor. They have place to shop, light refection and toilets. In basement of the Center there are a technological background and parking places. The remaining parking places are located on the terrain in the northern part. Construction system of the building is monolithic reinforced concrete. Roof is flat and single-skinned. Architectural building solution is created in software Archicad 21.0.0 Component from the company Graphisoft. Building physics is processed in group of software’s from the company K-CAD spol. s.r.o. In the specialization is the Diploma thesis dealing with study of roof panel. Panel is modeled in software RFEM 5.14 from the company Dlubal software s.r.o. The study then deals with the evaluation of the stress in the board from the most unfavorable combination of loads, the design of the reinforcement and the assessment of the reality of the proposed slab thickness, which was determined in the framework of study work using empirical formulas.
|
|
|
Brno Trade Fairs Future
Mičková, Markéta ; Hybská, Bohumila (referee) ; Sedláček, Michal (advisor)
The diploma thesis follows the urban planning analysis of the BVV area, which was elaborated in the subject TG02 –Specializovanýateliér. The Diploma Project processes an architectural study of the hotel with a congress center. The request for the proposal was the classification of the building into First Class (**** hotel) according to the Official Uniform Classification of Accommodation Facilities of the Czech Republic, as well as the number of rooms 250. The congressional part should serve more than 2,000 persons. The design responds to the historical urbanism of the BVV area, where it retains and optically complements the view axis to the Z-pavilion. The building also reacts to the height next to the standing mansion. In its close proximity is the lower part of the building with the congress center, the height part with rooms is located on the opposite side, at the sports hall. The object is optically divided into two parts - a lower base and a "growing" height part with room. The congress and the hotel part are optically separated by planing offsets and façade solutions. Lower, congress, part orbit horizontal aluminum lamellas, instead, the hotel creates vertical lamellas. These lamellas serve not only as optical separation but also as shading.
|
|
|
Hotel "U Prehrady"
Černý, Dávid ; Nováková, Eva (referee) ; Kolář, Radim (advisor)
The subject of this diploma thesis was to process the study and the design documentation for a newly built hotel in Brno, in city district “Kníničky” near the artificial dam “Přehrada” in a rest area. The hotel will serve as temporary accommodation for up to 64 hotel guests in single, double and four bed rooms. The object also contains training rooms, offices, a meeting room, a café, a small grocery store and a restaurant with kitchen. Parking is possible in one of the two mass garages and there is an outdoor parking possibility in front of the hotel too. The building has a cast-in-place concrete frame with longitudinal beams and sway bracings. The external wall consists of aerated concrete bricks with contact thermal insulation system ETICS (insulation material mineral wool), the ceilings will be cast-in-place reinforced concrete ceilings and the roof flat green roof or flat roof with gravel on it above the 5th floor. The foundation construction consists of reinforced concrete foundation strips, which expand to foundation pads under the load-bearing columns and will be supported by piled foundations under the most exposed elements. As long as the hotel is situated into a fairly steep slope, the vertical alignment of some building parts is various so part of the project is the design of landscaping works. Design documentation was processed using the program AutoCAD 2017, the study and the visualization using both SketchUp 2015, LayOut 2015 and Lumion 5.
|
guest ::
