|
|
Fitness center design with minimal environmental impact
Kučera, Matěj ; Kolářová, Eva (referee) ; Kolář, Radim (advisor)
The diploma thesis deals with the design and project documentation of a fitness center. The designed building is situated in the centre of Brno in a busy environment with a direct connection to the city ring road. It is a two-storey non-basement building with a flat green roof. The building is based on a combination of plain concrete strip foundations, reinforced concrete slabs and pads. The load bearing, external and partition walls are designed from the aerated concrete blocks. The outer skin consists of thermal insulation, slats and vertical garden flowerpots. The floor structure is predominantly designed from pre-stressed concrete panels. Facade is ventilated. The building is divided into two floors where each has its own purpose and specification. In the 1st floor there is a gym, room for trainers, dressing rooms and utility room. In upper tract there are exercise rooms and cardio zone. The building is designed as wheelchair accessible. Around the building there is designed a car park for 24 cars with grass paving and a medium-sized trees. The second part of the thesis environmentally deals with the building services. The building will be heated by four heat pumps and will also use energy from photovoltaic panels. Air exchange and cooling will be solved using air conditioning. Third part of the thesis deals with the evaluation by certificate of energy performance of the building comparing the used heating method with the use of fossil fuels. The thesis is mainly elaborated in Autocad, SketchUP, Deksoft, Lumion and Microsoft office software.
|
|
|
Medical center in Prostějov
Kubíček, Jan ; Hobzová, Klára (referee) ; Benešová, Romana (advisor)
The aim of this master´s thesis is to elaborate the project documentation of a new-built medical facilty for building permit, in the cadaster area of Prostějov. The building has six medical offices with facilities, pharmacy with the production of drugs and X-ray equipment. The building is simply-shaped, with two aboveground floors. The vertical loadbearing structures are designed from sand-lime blocks. The building is insulated by a ETICS with ventilated facade with green facade. The horizontal loadbearing structures and the staircase are designed from reinforced cast-in-place prefabricated parts. The concept of flat roof is an extensive green roof. The building is heated by gas condensing boiler. The building uses photovoltaics to produce electricity for save non-renewable resources. The building is ventilated using mechanical ventilation. In the third part, an assessment of water management was performed. The project was processed in ArchiCAD and Lumion.
|
|
|
Pension Přehrada
Svobodová, Monika ; Kalánek, Jiří (referee) ; Brzoň, Roman (advisor)
The topic of master project was the processing the design documentation for a Pension Přehrada. I designed a pension with a restaurant and a small wellness area. It is a detached building in the cadastral territory of Brno Kníničky. The building is L-shaped and consists of two parts. The first part has two above-ground floors and a loft. This part of the building is covered by a gable green roof. The second part of the building has one above-ground floor and warm flat roof. The vertical structures are designed from ceramic blocks. The external masonry is insulated with the ETICS. Some external masonary are designed like exterior ventilated facade with stone cladding and a green facade. Floor structures are designed by SPIROLL panels. The master project includes the concept of heating, ventilation, cooling, domestic hot water heating, lighting, rainwater management and photovoltaic panel design. In the part of my project, I focused on optimizing the design of the gable roof. I changed the composition of the gable roof so that more rainwater would be retained to be used in the facility. I placed additional photovoltaic panels on the gable roof and simulate whether they would cover the electricity consumption in the building. I evaluated the changes in the energy performance certificate, and compared them with the original design.
|
|
|
Garden Centre Tilia
Šnajdárková, Zuzana ; Hobzová, Klára (referee) ; Benešová, Romana (advisor)
The thesis focuses on project documentation for a construction project with the aim to design a garden center with an administrative part that deals with the design of gardens. The building is situated in the outskirts of Nový Jičín. It is partly a one-story and partly a two-story building. The object lays on the slab foundations, vertical structures are made of ceramic blocks. The horizontal structures are made by prestressed Spiroll panels, due to the large spans. The building is covered by a vegetated flat roof. The exterior walls are solved with the ETICS system or with a ventilated facade made of wood or a green facade. On the 1st floor there is commercial area - 2 units intended for the sale of mainly indoor plants, decorations and goods for the home and garden. From both of these units, there is access to the outdoor sales area, where goods of larger dimensions are considered - outdoor trees, shrubs, outdoor plants. There is also a cafe and a florist studio. The florist studio is considering selling cut flowers, bouquets and decorations.In the central part of the 1st floor there is an atrium with a large skylight. The second floor is intended for a design office and a training room - designed for holding evening courses - garden architecture, flower arranging, tree cutting, etc.
|
|
|
Office building
Rousková, Radka ; Kalánek, Jiří (referee) ; Brzoň, Roman (advisor)
The aim of this master's thesis is to design a low-energy office building in Lanškroun. There are three parts, documentation for building permission, a concept of HVAC documentation and multi-criteria assessment in SBToolCZ. The SBToolCZ evaluates of 39 standards, which are divided into four groups – environmental, social criteria, economics and management and location. The proposed building is two-storey, the ground floor is partly below ground level and is designed of reinforced concrete. The first floor is made of CLT panels. The building has a green roof. A green facade will be made on three sides of the ground floor. On the ground floor, there are reception, a meeting room, offices, a technical and storage facilities. On the first floor, there are offices with facilities for employees. Energy for heating and domestic hot water is provided by a condensing gas boiler. Ventilation in the building is provided by an air conditioning unit with heat recovery. There is an underground tank for collecting rainwater that is used for watering the garden and the green facade. The thesis is processed mainly in the software AutoCAD, MS Word, MS Excel and DEKSOFT.
|
|
|
Apartment building
Maršálková, Martina ; Kozubíková, Ivana (referee) ; Matějka, Libor (advisor)
This bachelor thesis processes the project documentation for the apartment building with a nearly zero energy consumption. The project of an apartment building is located in the city of Liberec, city district of Vesec and has four above-ground floors and one underground floor. The foundation of the apartment building is located in a slightly sloped terrain overlooking Ještěd and the neighborhood consists of family houses and apartment buildings. The main intention was to design comfortable, spacious and modern living space with low energy costs. The layout of apartments is suitable for families with children or for a young couple. None of the housing units are designed as barrier-free for people with limited mobility, but access to the building is wheelchair accessible and, if necessary, apartments can be changed to meet the requirements for barrier-free standards. In the basement of the building there are common areas including the gym and separate garage parking spots. Parking will be available even outside of the building, located from both sides of the building. The elementary materials used for the construction are brick and concrete from which the supporting structures of the building are made. The roof and part of the front of the building is designed to include vegetation.
|
|
|
Kindergarten
Hylišová, Alena ; Nováková, Eva (referee) ; Kolář, Radim (advisor)
The diploma thesis project deals with a new kindergarten with a café in the inner town of Humpolec. It is a single-storey building, with a flat vegetation roof and parts of a green façade. The layout of the building is divided into kindergarten and café, designed for parents with children. The kindergarten has classes on its sides with facilities for children and employees, the central part consists of common areas, preparatory meals, warehouses, principal's office, technical rooms, facilities for employees. The load-bearing vertical structural system is masonry, horizontal load-bearing ceiling structures made of prefabricated prestressed panels, ceramic system lintels. The technological equipment of the building includes an air/water heat pump for obtaining thermal energy, an air-conditioning unit with heat recovery to ensure forced ventilation. The project is solved at the level of implementation documentation, with the help of graphic systems ArchiCAD, Artlantis, building physics programs Svoboda software and program Light+.
|
|
|
Office building
Eryshova, Natalia ; Stránská, Zuzana (referee) ; Struhala, Karel (advisor)
The aim of this Master´s Thesis is to create project documentation for office building with nearly zero energy consumption. The topic of the Master´s Thesis is Office Building located in Brno Komárov. Thesis is divided in to 3 main parts. In a first part, constructional solution is proposed. Office building is designed for recruitment agency with capacity of 32 personnel that consists of 3 floors, green roof and green facade. Ground plan of designed building is in rectangular shape. On the first floor there is a reception, offices, registry, small kitchen and staff room. Second floor is similar to the first one but it has a conference room. Third floor is designed as staff room with coffee lounge. In second part of Master Thesis design of building services engineering systems is proposed. Building uses forced ventilation with heat recovery. Heating is provided by two condensing gas boilers. Supply of electric energy is partially ensured by photovoltaic power plant. In addition, rain water is effectively used in this building. In the third part evaluation of six designed compositions of floor with Life Cycle Assessment method is done. Software used to elaborate this Master´s Thesis are following: ArchiCad, DekSoft, GaBi, Excel and Lumion.
|
|
|
Object of civic amenities
Zachovalová, Jana ; Pilný, Ondřej (referee) ; Berková, Petra (advisor)
Submitted diploma thesis prepares project documentation for the construction of a hotel building with a restaurant, which is located in the central built-up area of the town called Letovice situated in the South Moravian region. The solved building is partially basement with three above-ground floors covered by a flat vegetation roof. The hotel is designed with 23 accommodation units with a total capacity for 52 persons (including 4 persons with reduced mobility on the 2nd floor) and a restaurant for 98 guests, a bathroom and a kitchen. Guest rooms are located in the 2nd and 3rd floors. There are representative areas of the hotel in the form of an entrance hall with reception, areas for hotel management and a restaurant with a kitchen including social facilities for employees on the groud floor. There is a technical background of the building and maintance working room in the basement. The building comlies the requirement for low-energy standard buildings by combining a quality construction solution with thermal insulation of the building cover and other technological solitions. The overall character of the building is underlined by its architectural design in the form of partial greening of the facade. This solution is combined with large glazed areas giving a feeling of spaciousness and evocative cleanliness to the building.
|
|
|
Nursing home
Jurajdová, Alžběta ; Jelínková, Barbora (referee) ; Jelínek, Petr (advisor)
The content of this diploma thesis is the design of a new boarding nursing home in Dolany. building with two floors and a residential attic. The main entrance to the building is located on the north side. On the first floor there is a spacious common room, two apartments (one belonging to the administrator of the building), technical room, room for maintenance and cleaning, storage, toilets, areas for nursing services and cellars. The second and third floors are accessible by internal stairs and elevators. Both floors have the same accessibility. In each of them there are a total of 7 apartments. the vertical load-bearing structures are made of ceramic masonry with a contact thermal insulation system. The roof structure consists of a gable roof with ceramic roofing. The project documentation was prepared in accordance with valid legal and technical regulations.
|
guest ::
