National Repository of Grey Literature 73 records found  beginprevious21 - 30nextend  jump to record: Search took 0.00 seconds. 
Static solution of parking house
Tvrzník, Jakub ; Přikryl, Václav (referee) ; Zich, Miloš (advisor)
The diploma thesis is focused on the design of the supporting structure of a multi-storey parking house. Part of the work is also a search of three parking houses in our country and in Slovakia. The content of the work is a preliminary design of 3 variants of a typical ceiling structure. Subsequently, one variant is selected and processed in detail. A flexurally supported slab-wall model was created in Scia Engineer for the analysis of the structure. Selected structural elements were modeled separately. Additional assessment is performed in GEO, FINE, IDEA Statica, JORDAHL and MS Excel software.
Static design of building for accommodation
Jirčík, Jakub ; Perla, Jan (referee) ; Požár, Michal (advisor)
The topic of the bachelor thesis is static design of monolithic reinforced concrete beam and reinforced concrete columns of the third floor of the hostel in Rokycany. Element design is done using Scia Engineer and the control is done manually. The design was followed according to valid European standards ČSN EN 1992-1-1 and ČSN 73 1201. The result of this work is static design of reinforcement of reinforced concrete beam and column and drawing documentation.
Injection moulding
Heralt, Aleš ; Balej, Zdeněk (referee) ; Žák, Ladislav (advisor)
This Bachelor´s thesis is focused on construction forms for injection of thermoplastic matters. The technology for plastic products production is technology that participate more and more in production of all sorts of products - from technical components over kitchenware after as much as toys. Main part of this thesis is focused on description of the injection valve, ejector, annealing and ventilation system forms for injection with the main structural principles.
Production of support by solid forming
Pfeifer, František ; Štroner, Marek (referee) ; Kopřiva, Miloslav (advisor)
PFEIFER František: Production of support by solid forming. A Graduation Thesis of Master´s Studies, the 5th Year of Study, the School-year 2008/2009, FSI VUT Brno, Department of Machining, May 2009, Pages No. 94, Pictures No. 37, Tables No. 3, Appendixes No. 13. The Graduation Thesis, elaborated in the framework of engineering studies, presents the production technology of support component from steel ČSN 12 010. A material is a rod of the 130 – 251 ČSN 42 5510. A yearly production is 95 000 pieces. Based on the studies of possible production technologies was proposed the technology of production by the vertical forging press LMZ 6500B (Šmeral Brno a. s.) with a nominal forming power of 65 MN, flash and pellicle trimming on a trimming press with a nominal power of 8 MN. For this option, the required technological calculations, the design of the die, the specification of production machines and a simulation forming process which is made in the software QFORM have been carried out.
Manufacturing of mudguard holder using forging technology
Ondráček, Miroslav ; Podaný, Kamil (referee) ; Šlais, Miroslav (advisor)
The diploma thesis deals with problems of drop forging. A detailed literary study is prepared in this work, in which there are data for working out the specified component – mudguard holder. There are options for cutting the semi-product, types of lubricants, construction of ideal preform or different kinds of forging machines for drop forging. The next part of this thesis is about technology of drop forging on crank forging presses. This section is aimed on technical drawing of the forging and its classification by the complexity of the shape. Furthermore, the thesis deals with the economic part, setting out the individual costs of the production from which the cost price of a forging is determined.
Design of robotized workplace for die forging
Krejčí, Radek ; Zavadil, Radek (referee) ; Podaný, Kamil (advisor)
The thesis deals with the design of technology for production of wheels to be manufactured by die forging 15 142 low-alloy steel at an amount of 500,000 items per year. Based on a consideration of the suitable methods of manufacture, die forging on a Jing Duann FP-1600G vertical forging press was chosen as the best, as documented by the necessary technological and design drawings. A die with inserts made of 19 552 steel was designed for this machine. In view of the volume of annual production, a fully automated workplace was designed consisting of three robots and a chain and pan conveyor. In the conclusion there was a technical-economic evaluation of costs for the material of the semi-finished products and price of dies for annual production.
Application of Conductive Inks and Low Temperature Sintered Pastes in PCB Production
Kolek, Andrej ; Špinka, Jiří (referee) ; Starý, Jiří (advisor)
The present masters's thesis informs about the development and application of low-temperature sintering pastes in the manufacture and assembly of PCB components of the enclosing lead-free using nanoparticles of metals and their compounds. Lead-free brazing technology which s using in the present time, which has its drawbacks, however, and thus gaining other appropriate alternatives that seek to replace or further refined lead brazing. The introduction of the theoretical part inform about retrieval method of the type, composition and properties of low-temperature sintering pastes consisting of metal nanoparticles and their compounds. This section describes and explains the reaction mechanisms taking place during the sintering process. The end of the first chapter is dedicated to nanotechnology and production of nanoparticles and their compounds for the needs of the low-temperature sintering and possible related problems. Folowing section is devoted to examples of practitioners of the application and use of low-temperature sintering pastes and tests with which to assess the characteristics and quality of the related sintering conection. At the end of the thesis is a summary perspective and the use of low-temperature sintering technology nanoparticle past into the future. The experimental part is devoted to the application of conductive ink on the base of graphite for the production of 1V, 2V and 4V structures and their electroplated by the copper. There were created technological processes of 2V and 4V structures and test proposed methodologies resistance conductive theme to environmental influences. Filling pasta was tested in implementing 4V structure. There were made microsections various technological applications and their results were processed and evaluated.
Forging of the "lock-bolt"
Frýdl, Pavel ; Štroner, Marek (referee) ; Lidmila, Zdeněk (advisor)
To lock-bolt manufacturing was selected technology of die forging. Lock-bolt is made of 11375 steel in a series of 2700 pieces per year. With the use of literary studies and practical knowledge has been developed technological process fittings. It includes the draft instrument stainless steel 19663 including drawings. Forging is performed on a hydraulic-pneumatic hammer KJH 2 with a nominal value of 20 kJ impact work. Blanks are cut from bars 30 mm 6 m long to bars 52.2 mm long. The techno-economic evaluation shows that the price of a forging is 4,71 CZK and for production will be need 24 pieces of bars.
Bus terminal building - static analysis
Fišman, David ; Jurík,, Michal (referee) ; Zich, Miloš (advisor)
The master's thesis deals with the construction and design solution of the bus terminal project in Liberec. The building consists of three floors with different functions. In terms of structural shape, the entire length of the building consists of a cross-section of a two-storey, asymmetrical cantilever suspended on both sides. The main load-bearing structure of the roof contributes along its entire circumference to the load-bearing capacity of the lower ceiling by a system of ties. The design was defined by a feasibility study of the project, which established the concept of the appearance of the structure. The main target of the thesis was to design the solution of the load-bearing structure and then perform static analysis, dimensioning and assessment by the method of limit states according to the corresponding ČSN EN. The solution of the construction consists mainly of reinforced concrete elements which are suitably combined with steel parts. Elements of reinforced concrete are designed as monolitic or prefabricated. For the most loaded two-sided cantilever was designed reinforced concrete variant and prestressed variant. The thesis was made in its extent in a BIM compatible design.
Design of wheel hub production
Zahálka, Tomáš ; Lidmila, Zdeněk (referee) ; Podaný, Kamil (advisor)
The subject of this thesis was to propose a possible way of production for a wheel hub on the front axle of VAZ 2101 made out of steel 12 050. Based on the accesible technologies was selected a volume thermoforming technology, specifically drop forging for its positive impact on mechanical features of forging. Construction of the die cnforms to the norm ČSN 22 8308 with closed spout groove. The forging is done by a hammer KHZ 8A, with an impact energy of 80 kJ. Dies, upper and lower, made of tool steel 19 552, tempered to 54 HRC.

National Repository of Grey Literature : 73 records found   beginprevious21 - 30nextend  jump to record:
Interested in being notified about new results for this query?
Subscribe to the RSS feed.