|
|
Exhibition Pavilion
Badár, Tomáš ; Buchta, Stanislav (referee) ; Bajer, Miroslav (advisor)
The aim of the work is to design steel structure exhibition pavilion. The building is situated in Brno. The construction is processed in two options. The option A is designed in variant of arched space frame. The internal ground plan dimensions of the building are 42 x 72 meters. Space frame is hinged to the structure of columns. Height in the top of the ship is 16,834 metres. The option B is designed in variant arched truss. The internal ground plan dimensions of the building are 42 x 70 meters. Arched truss is hinged to the structure of columns. Height in the top of the ship is 18,334 metres. The spatial rigidity of the structure is ensured by cross braces. Roof cladding and walls will be made using sandwich panels of KINGSPAN. The main material will be used steel S235.
|
|
|
Brno Trade Fairs Future
Kousal, Petr ; Hybská, Bohumila (referee) ; Sedláček, Michal (advisor)
Brno will continue to be the city and the centre of the fairs. The historical part around the pavilion A is opened to public and the fairs are concentrated around the pavilion Z, where a new city entrance is planned within a linear park, also a new pavilion and a superstructure with residence of BVV is planned. Newly, the terminal Lipová is designed with the cableway station, which is not only an attraction over the valley of Pisárky, but also represents a form of transport to the campus Bohunice and back to the trade fair center. The design of an exhibition pavilion is situated in a part of Brno-Pisárky, in western area of BVV. The Pavilion contains an exhibition hall and an entrance edifice on a new axis directed from an Anthropos over an superstructure on a significant pavilion Z. The entrance edifice in a central of pavilion is surrounded by exhibition area and its centre is plaza with natural woody plants and colonnade. Entries are leaded on galleries on this level. Galleries are opened into the exhibition hall. A restaurant has a specific view on the dominant-pavilion Z. A visitor goes through the plaza and descends on monumental stairs to the pavilion Z into area of BVV in a primary direction. The visitor descents from the plaza over each galleries to the exhibiton area in a secondary direction. The proposal offers to the visitors and exhibitors not only gathering outdoor relaxation area on the plaza, but moreover interesting experiences from galleries. The total built area of the pavilion is almost equal to the exhibition area, because the design creates the entry level on the third floor. The new building meets the requirements of modern exhibitions and will be used for social and educational events - balls, weddings, conferences, cultural events - concerts, theater, opera performances and sports events. The Pavilion will be visited by inhabitents of all ages not only from Brno, from near and distant surroundings, but also by visitors from abroad.
|
|
|
Steel construction of an exhibition pavilion
Wawreczka, Karel ; Šmak, Milan (referee) ; Štrba, Michal (advisor)
The aim of diploma thesis is to design steel roof structure of minimum dimensions 45 m x 50 m and minimum height 12 m. The plan of the building design has dimensions of 52,14 m x 70, 00 m and height is 18,68 m. The roofing was design as 3D truss girders with two lower chords and one upper chord. The shape of 3D truss girder consists of three circular arcs of radius 69,88m, 12,43 m and 33,45 m. Between main girders is 3D bracing. The structure is pin-supported.
|
|
|
Multifunctional Pavilion
Dvouletý, Martin ; Pilgr, Milan (referee) ; Barnat, Jan (advisor)
The subject of the diploma thesi is the design and assessment of the pavilions supporting structure for exhibition and other purposes. The building is located close to Zlin. Preliminary designs of supporting structure were created. One of these was selected and detaileddesigned and assessed. Generallythere are two structures that are extended between themselves. A design and assessment of the entrance portal for the exhibition pavilion was created. The entrance portal is an atypical structure that was created from a combination of hyperboloid and cylinder. The entire portal is formed of welded parts and it is completely from glass. The entrance portal has a variable height, where the highest point is 8,258m. The entrance portal is 20,394m long and has a variable width, where the largest width is 12,000m. The exhibition hall, which is located behind the entrance portal was designed from flat arched truss trusses. The arched trusses are made of several radii and hasa overall impression of an elliptical truss. The trusses have a range 37,000m and they are axially distant 6,000m. The height of the arched trusses is 10.530m. In the leading position of the construction were designed pillars and construction for possible connection of the entrance portal, or for the location of the gate system. Whole construction of the exhibition pavilion, without the entry portal, is 54,000m long and 37,000m wide. The built-up area of both structures is approximately 2200m2. Construction are designed according to normative requirements of CSN EN for limit state of load capacity and usability. The main material of the supporting structural parts was used S355JR steel.
|
|
|
Steel structure of exhibition pavilion
Kárník, Miroslav ; Pešek, Ondřej (referee) ; Horáček, Martin (advisor)
The goal of the bachelor’s thesis is to design and assess a steel structure of the exhibition pavilion in Česká Třebová. The ground plan dimensions of the load–bearing structure are 30 meters in width and 63 meters in lenght. The maximal height of the structure is 12 meters. Main frames are made of truss girders of atypical shape. The girders are pin–supported on solid columns on one side and on foundation pads on the other side. The distance between the main frames is 6 meters, the distance between the solid purlins on the girder is 3 meters.
|
|
|
Exhibition pavilion
Nováček, Tomáš ; Šmak, Milan (referee) ; Sýkora, Karel (advisor)
Master´s thesis describes the structural design of the load bearing steel structure of exhibition hall located in Brněnské Výstaviště. The structure is designed according to the normative requirements of ČSN EN for ultimate and serviceability limit state. It´s structure formed by the parabolic main frames at a distance of 6 m apart, which are placed in a rectangular plan of 36 x 36 m. As the main material of load bearing elements was used a steel S355. The hall is designed for exhibitions and social occasions. The work contains a statical calculation, which assessed individual cross sections and joins.
|
|
|
Exhibition pavilion
Bystrianská, Kateřina ; Pilgr, Milan (referee) ; Štrba, Michal (advisor)
This Bachelor´s thesis describes the design and assessment of steel structure of exhibition pavilion in Brno. The supporting structure of pavilion is 30,5 m span, 53 m lenght, clear hight at the highest point is 13,27 m. Main construction material is steel, grade S355. The supporting structure consist of columns and arched trusss girders. The distance of each cross links is 5 m. It is prepared statics calculation of the main load-bearing parts of the structure, including joints and details.
|
|
|
Exhibition Pavilion
Shánělová, Lenka ; Šmak, Milan (referee) ; Bajer, Miroslav (advisor)
The Master´s thesis contains design of steel construction of exhibition pavilion, which is consists of columns, dome, lantern and suspension footbridge. Building will be intended for organizing exhibitions and conferences by town Trutnov. Two models of variants of dome´s construction are drafted in this work– Schwedler´s and Föpple´s dome. Models are space tubular structures.The work contains static assessment of spatial structures and spherical steel joint in program SCIA Engineer for both variants. Hand assessment of bars, basic details and anchoring, technical report and drawing dokumentation are drafted for selected variant construction with Schwedler´s dome.
|
|
|
Exhibition pavilion
Španihel, Jiří ; Doc.Ing. Bohumil Straka,CSc. (referee) ; Sýkora, Karel (advisor)
The subject of the diploma thesis is design and examination of supporting steel structure of the exhibition pavilion situated at the Brno Exhibition Centre, including a comparison with the second variant. The design emphasis has been placed on keeping the architectural character of building related to its purpose. The structure consists of 11 sections shaped as elliptical arcs, formed by truss frames with variable length of semi-axes, while the largest size (the smallest) is 13 m (7 m) for minor semi-axis and 20 m (14 m) for the main semi-axis, height is 16 m (10 m) and distance of support 38.92 m (25.30 meters). For the analysis of internal forces has been assembled spatial bar shaped model. Cladding is made of Kalzip system.
|
|
|
Presentation pavilion of WANEMI, a.s. paper-mill in Zábřeh
Říhová, Helena ; Svoboda, Jiří (referee) ; Zemánková, Helena (advisor)
The sense of the diploma paper is to make a new entrance - green belt - for the paper factory - WANEMI. There is the exhibition pavillion and the administration building situated in the green belt. The main point of the diploma is the exhibition pavillion. The project is based on the basic principle of ekological architecture like - demounting, using of the waste water and using of the waste warm air. The elementary pavillions´ shape reminds of a paper folder. There are another small exhibitions and constructions in the park. Everything is united by shape and material. The park is the cultural area for sport and education.
|
guest ::
