|
|
Extension of optical fiber transmission system
Horský, Tomáš ; Tomašov, Adrián (referee) ; Dejdar, Petr (advisor)
The diploma thesis describes the elaboration of a program for the simulation of an optical transmission path. The work introduces the basic parameters of optical transmission, such as attenuation, dispersion and bandwidth. Furthermore, the techniques of line code and error detection are described in the work, especially a cyclic redundancy sum. The key parameter of this thesis is dispersion of the optical signal. The work includes the characteristics of the eye diagram and its analysis. The resulting program can also be used to measure the real transmission route and its parameters.
|
|
|
Modeling and simulation of PLC in Network Simulator-3 for Smart Metering
Petrůj, Jakub ; Sláčik, Ján (referee) ; Mlýnek, Petr (advisor)
The diploma thesis deals with analysis and modeling of power line communication using NS-3. The introduction part summarizes basic information about PLC technology, distribution grids, and broadband standards. This is followed by the analysis of the transmission line and modulation method. Furthermore, the simulation tool and possibilities of its extension are described. The influence of different cross-section and type of line on channel capacity is examined in the practical part of this paper. The influence of repeaters on bitrate is examined as well. The medium-voltage line was implemented and further scenarios dealing with bitrate or optimal level of noise. The focus of the last part is to find the repeaters on the path and to determine the capacity and bitrate on the path of the large topology.
|
|
|
Quality of services and experience qualify for next generation networks
Vaněk, Jiří ; Horváth, Tomáš (referee) ; Grenar, David (advisor)
The thesis sums up the traffic parameters for the evaluation of next-generation access networks. There are mentioned parameters for service quality management and parameters for measuring the quality of experience. The EU regulation on High Speed Internet in the Czech Republic is analyzed. The practical part compares the results between the implementation of the quality management of services and without implementation. Also there is comparing theoretical and practical transmission rates of physical ports. Part of the thesis is a questionnaire focused on the quality of experience of the video sequence.
|
|
|
Verification of Properties of WiFi IEEE 802.11n
Alexa, Jan ; Miloš, Jiří (referee) ; Kuder, Zenon (advisor)
This bachelor thesis deals with wireless systems of IEEE 802.11 standards. This thesis explains the fundamental terms and principles, which are relating to digital wireless systems. This thesis is structured into four thematic units. The first chapter discusses an introducing with Wi-Fi standard – IEEE 802.11 in general. Second part contains a deeper focus on modern standards 'n' and 'ac', showing the main differences and innovation compared to older standards 'b', 'g', 'a'. Further in this part of the thesis is described using of MIMO technology. The third chapter contains an analysis and description of the application, which is part of the thesis. The fourth part is detailed focused on to the design of laboratory tasks for teaching at the undergraduate level, which demonstrates the use of MIMO technology.
|
|
|
Measurement of transfer speeds and delays in computer networks
Bárdossy, Adrián ; Kubánková, Anna (referee) ; Jeřábek, Jan (advisor)
Bachelor thesis is interested in measurement of transfer rate and latency in computer networks. In the first part of thesis is defined, which motodics of measurement we know, various RFC and their specifications, also various parameters about measurement in computer networks like bit rate, capacity of channel, latency. In the second part are prepared users interfaces and softwares for applying the measurement of thesd parameters. In the last part is application of these softwares and creating and testing methodic of network measurement.
|
|
|
Data logger for serial communication lines
Jankech, Tomáš ; Šebesta, Jiří (referee) ; Dušek, Martin (advisor)
The aim of bachelor’s thesis is the realization of data logger for serial communication lines. This paper describes basic concepts of serial communication and looks more deeply into RS232 and RS485 serial communications standards. It describes usual methods of data recording and their application in practice. Data logger’s block diagram is described in detail for each of its parts. Their descriptions contain an overview of circuits, which allows realization of individual blocks and circuit diagram of selected circuit. Following chapters describes design of printed circuit board, control application for PC and firmware for the microcontroller.
|
|
|
Verification of Properties of WiFi IEEE 802.11n
Alexa, Jan ; Miloš, Jiří (referee) ; Kuder, Zenon (advisor)
This bachelor thesis is focused on introducing with WiFi standard – IEEE 802.11 in general. A deeper focus is devoted to modern standards 'n' and 'c', showing the main differences and innovation compared to older standards 'b', 'g', 'a'. Furthermore, this work focuses on the use of MIMO technology. The last part is devoted to the design of laboratory tasks for teaching at the undergraduate level, which demonstrates the use of MIMO technology. Part of this thesis is an application that demonstrates the differences between those standards.
|
|
|
Modulations in PLC systems
Procházka, Vít ; Kouřil, Jiří (referee) ; Krajsa, Ondřej (advisor)
The bachelor thesis describes principles and methods of Powerline Communications, practical usage possibilities both in industrial applications but mainly in broadband systems that may represent promising competition to conventional broadband access, e. g. xDSL connections without the need of new wiring, WIFI etc. The thesis also focuses on problems that can occur in the communication channel from the view of electromagnetic compatibility and assorted interferences. The 50 Hz frequency electric network (60 Hz in the USA) was not designed for data signal transmission, problems may arise mainly at higher frequencies and broadband communication. It is necessary to implement methods which enable transfer of information signal through a communication channel with minimalization of problems such as interference, cable attenuation, electromagnetic compatibility, bit error rate (BER), etc. Furthermore, currently used modulation principles and their characteristics are described, such as spread spectrum modulation DSSS, FHSS, traditional OFDM, alternative modulations FMT and DWMT with filter banks. The last chapter of the bachelor thesis features models of particular modulations created in the Matlab-Simulink program and the conclusion presents advantages and disadvantages of their implementation in PLC systems.
|
|
|
Optical cabling - a comparison
Zelinková, Vlasta ; Křepelka, Václav (referee) ; Filka, Miloslav (advisor)
The thesis is focused on an analysis of mounting and cable laying fiber optic lines. The first chapter includes an analysis is made comparing parameters fiber and copper cabling, mainly in terms of access networks. This part specifies the various transmission media and access networks that are operated on them. Attention is focused on the transmission rate and its possible impact, provided the capacity and other important values. This section also demands site maintenance, service, or any failure on the routes of these networks. With this goal in the second chapter was created several designs networks that provide insight into possible solutions to the situation for emerging networks, and for upgrading existing networks, using both management and elements of optical and copper, or combinations thereof. Provide information from expert sources and verified directs the work of the future and to clarify further the eventual development of individual technologies. Most other space and offers the potential of optical technology, nature, and therefore the third chapter is fully devoted to only the transmission medium. At the beginning of this section is a theoretical analysis of possible ways of cable laying fiber optic cabling with a comparison of advantages and disadvantages. The most stable is an underground installation, which is costly in standard cases. As a result of these factors proved to be a possible solution using the underground installation of water pipeline shutdown. Therefore, the optical path designed, organized and implemented laying of fiber optic cable. By completing the inspection measurement and evaluation of the cost compared with other ways of installing fiber optic cable.
|
|
|
Multimedia support of the course BSIS
Pasečný, Jan ; Šebesta, Vladimír (referee) ; Sigmund, Milan (advisor)
This paper takes aim at creating a consistent form of study materials, supplemented with illustrative examples, for Signals and systems subject. The thesis starts with basic characteristics of acoustic, image, biological and communication signals. Characteristics of linear signals and AD&DA conversion has been added to the next part and to complete the submission, discrete signals follow. Diploma thesis as a whole contains basic theoretical description of problematics, which it tries to supplement with interesting examples, connections, graphs and matlab scripts for illustrative presentation of mentioned problematics.
|
guest ::
