|
Bulk forming technology of cases
Covrighin, Sergiu ; Šlais, Miroslav (referee) ; Forejt, Milan (advisor)
Bc. COVRIGHIN Sergiu. Bulk forming technology of cases. Diploma thesis in fifth class of master studies, academic year 2009/2010, study group 5M/68, FME UT in Brno, Institute of Manufacturing Technology, Department of Metal Forming, May 2010, pages 46 , 18 fig., 7 tab., 4 annexes. In diploma thesis is introduced a technological proposal regarding production of cases by bulk forming from cemented steel 14 220.3. Despite the estimated number of parts which is 70000 a year, quality and product accuracy, 2 options of technological procedures concerning cold bulk forming wth combination of backward and forward extrusion are being considered. For chosen option are elaborated technological calculations. As for the suggested technology, crank press, force 8000 kN and made by company KRUPP was chosen. Material for extruder is steel 19 569 and material for extrusion die is steel 19 655.
|
|
Static solution of parking house
Rose, Dominik ; Koláček, Jan (referee) ; Zich, Miloš (advisor)
The bachelor's thesis is focused on the elaboration of a static solution of a parking house with four above-ground floors. Three variants are elaborated, one of which was elaborated in more detail. The proposed elements are the ceiling slab, the columns and staircase. The SCIA Engineer 20.0 program is used to calculate the internal forces. As part of the work, drawing documentation is also prepared. The structure is designed according to correctly valid standards.
|
|
Production of shaft
Jančík, Petr ; Štroner, Marek (referee) ; Císařová, Michaela (advisor)
The bachelor's thesis is classified under the field of Engineering Technology and proposes a process for the production of a shaft made of steel 12 050 by combined extrusion. The material in question can be used, for example, for parts of mining machines, larger gears, pins or screws. In accordance with the acquired findings on the issue of volume forming, the production of the component was designed for two forming operations. A block with a diameter of 55 mm and a length of 146 mm was chosen as a semi-finished product. The production was designed on a Schuler automatic machine, which is a part of the company Metaldyne Oslavany, with a nominal force of 2 000 tons and a height of 7 meters in a series of 100 000 pieces per year.
|
|
Fatigue endurance of extruded Mg alloy AZ91E
Sobola, Petr ; Štěpánek, Roman (referee) ; Pantělejev, Libor (advisor)
This thesis deals with fatigue behaviour of magnesium alloy AZ91E produced by extrusion. In the frame of this work, basic mechanical characteristics and data from performed fatigue tests were obtained. Further metallographic analysis of microstructure and fractographic analysis of broken specimens after fatigue tests were carried out.
|
|
3D bioprinting of stem cells and analysis of microscopic images
Kandra, Mário ; Svoboda, Ondřej (referee) ; Kolářová, Jana (advisor)
In this diploma thesis we are discussing about using 3D bioprinting in tissue engineering. We are discribing using biomaterials for construction scaffolder and aplication stem cells in 3D bioprinting. Last section of theoretical part deals with very often used techniques of 3D bioprinting and we are focused on extrusion technique. In the practical part we propose a method for print vasculars structures. We realized prototype of print head, her design and 3D printing of individual parts. To mechanical part we create a control system for printing control. At the end we visualize the organization of the cells using program modules.
|
|
Experimental comparison of recycled and non-recycled filament of ABS plastic
Grygar, Filip ; Krčma, Martin (referee) ; Koutecký, Tomáš (advisor)
Plastic waste which arises from 3D print could be recycled. One of the most used materials is ABS with which this degree work deals. During recycling of ABS mechanical qualities rapidly deteriorate which is compensated by adding non-recycled ABS. This degree work dealt with a ratio of 25% of recycled to 75% of non-recycled material which is a ratio not have been tested so far, and most likely represents a boundary ratio when recycling still makes sense. Unfortunately, it was not possible to extrude from a recycled material a filament of high-quality enough which could be used for problem-free print. It was influenced by non-homogeneity of crushed components and the construction of an extruder. For improving the characteristics a more complex extruder would be needed, with a bigger screw diameter or with two screws, and also a cooling system with more zones. Professional grinders with screens would have to be used for improving homogeneity of the material. The melt flow index of the liquid alloy and the testing of the filament itself showed that this way is practicable and such a recycling is realistic.
|
| |
|
Properties of polyethylene blown-films dependent on their composition
Štaffová, Martina ; Poláček, Petr (referee) ; Tocháček, Jiří (advisor)
This work deals with the influence of quantity of recycled material on physical properties of blown-film. The task of this work is to prepare set of laboratory made films with amount of LLDPE granulate from 0 to 100 % with addition of LDPE recycled material and furthermore with addition of filler, calcite. The following methods were used for characterization of blown films: tensile test, differential scanning calorimetry, Fourier transform infrared spectroscopy, confocal laser scanning microscopy. The same measurements were performed also on industrial made blown-film.
|
|
Testing of processing stability of PP-g-IA
Hampapa, Břetislav ; Tocháček, Jiří (referee) ; Kučera, František (advisor)
The Bachelor’s study is interested in processing stability of polypropylene grafting with Itaconic anhydride. A present knowledge about thermal degradation of Itaconic derivatives was summarized in theoretical part. Samples were prepared by multiple extrusions technique from virgin PP (Borsodchem, Hungary) and PP-g-IA. Die temperature 230 °C, processing time 4 minutes by 20 RPM. Qualitative and quantity analysis was made by FT-IR spectroscopy.
|
|
Manufacturing possibilities of sparking plug body
Strnad, Miroslav ; Kopřiva, Miloslav (referee) ; Podaný, Kamil (advisor)
Difficulties of manufacturing sparking plug body are analyzed in this thesis, which aims to select the most appropriate option. Body is circular section of steel 1.1191 (12 050), with a hole in the middle and upper part of this body is ended with hexagonal shape. The series is estimated at 1 000 000 units per year. For the production of sparking plug body are selected options from the machining and forming technologies. Specifically, turning and milling, casting, forging, a method using superplastic material and cold extrusion. Selected technologies will be reviewed based on cost to produce one piece, time requirements of manufacture of the unit, material usability and overall feasibility. According to these parameters forming is chosen as the best option.
|