|
|
LiFePO4 battery with BMS circuits for a battery drill
Fiala, Václav ; Červinka, Dalibor (referee) ; Vorel, Pavel (advisor)
This bachelor thesis deals with problematics of lithium accumulators. There are listed properties and practical use of lithium accumulators. There is also the chapter of lithium-ion-iron-phosphate accumulators, which will be a practical part of this thesis Next part of the thesis solves a safety electrical circuit system for new lithium batteries which will be able to protect batteries against overcharging or undercharging. In the practical part of the thesis new LiFePO4 batteries for the cordless drill were designed. Also, the mentioned safety electrical circuit was designed and tested.
|
|
|
Design of PV plant with accumulation for commercial building
Jörka, Lukáš ; Morávek, Jan (referee) ; Mastný, Petr (advisor)
This Master´s Thesis deals with the design of photovoltaic power plant with accumulation for commercial building in the city of Holešov. The first part of the thesis describes the requirements for connection and operation of power supplies with inverters according to Annex 4 of the PPDS and the European Commission directive RfG. The second part of the work focuses on the theory of photovoltaic systems, while their basic concepts are introduced, the individual components of photovoltaic systems are described, and eventually, the issue of inverters dimensioning is discussed in more depth. In the practical part of this thesis, the design of photovoltaic power plant with accumulation using the PVSOL program is performed. Within the design, components for PV plant with accumulation are selected, the project documentation of PV plant for building permit is prepared and the energy-economic analysis of the proposed solution is performed.
|
|
| |
|
| |
|
|
Automatic battery charger for medical equipment
Talanda, Oldřich ; Daněček, Vít (referee) ; Chmelař, Milan (advisor)
The goal of this thesis is describe properties accumulators used in medical industry and proposal automatic baterry charger for medical equipment. The first part of the master’s thesis describes the most commonly used types of electrochemical accumulator systems used in the medical industry. Further listed are the criteria for the identification of the accumulator charge status. The second part of the master’s thesis defines demands on automatic baterry charger and proposal factual network solution.
|
|
|
Battery storage with second life cycle batteries
Král, Dominik ; Pazdera, Ivo (referee) ; Procházka, Petr (advisor)
The bachelor thesis deals with problems related to the solution of energy storage. It deals with the analysis of used types of accumulators, deals with their advantages, disadvantages, on what principle they work. It focuses on the possibilities and problems of using batteries in the "Second life" mode. It presents the subsequent process of preparing batteries for further application and defines the tests necessary to evaluate the condition of batteries before further use. Finally, the actual energy storage designs and the block topology of the energy storage are presented.
|
|
|
Recuperation systems in automotive technology
Běhoun, Lukáš ; Repka, Martin (referee) ; Zháňal, Lubor (advisor)
The aim of this bachelor thesis is to examine the methods of energy recuperation in the automotive technology. The first section explores the historical development of the recuperation systems spanning from the end of the 19th century to the present day. The second section is following with the division of the recuperation systems in accordance with the method of their energy storage and their transmission. This is consecutively supported by three examples of use for each of the systems. The third section offers a comparison of the individual cumulative units. Furthermore, it offers a comparison of all the types of systems used in bus transportation. The fourth section analyses the fuel consumption by a bus without a recuperation system and by an identical bus with the Bosch Rexroth recuperation system. This is supported by calculations. Subsequently, the above systems are scrutinized from an economical point of view. The last part deals with the possible development of recuperation systems in the future.
|
|
|
Design of PV plant with accumulation for commercial building
Jörka, Lukáš ; Morávek, Jan (referee) ; Mastný, Petr (advisor)
This Master´s Thesis deals with the design of photovoltaic power plant with accumulation for commercial building in the city of Holešov. The first part of the thesis describes the requirements for connection and operation of power supplies with inverters according to Annex 4 of the PPDS and the European Commission directive RfG. The second part of the work focuses on the theory of photovoltaic systems, while their basic concepts are introduced, the individual components of photovoltaic systems are described, and eventually, the issue of inverters dimensioning is discussed in more depth. In the practical part of this thesis, the design of photovoltaic power plant with accumulation using the PVSOL program is performed. Within the design, components for PV plant with accumulation are selected, the project documentation of PV plant for building permit is prepared and the energy-economic analysis of the proposed solution is performed.
|
|
|
Optimization of collection of backward collected batteries and accumulators in the framework of the Czech Republic using GIS
Kukal, Tomáš Augustin ; Matějíček, Luboš (advisor) ; Innemanová, Petra (referee)
With increasing growing the number of batteries, namely accumulators, Consequently, their take-away and a need of recyclation is increasing too. It is thus necessary to find a suitable way to their optimalization that can lead to the establishment of new waste collection machineries. This study deals with the data analysis by ECOBAT s.r.o. company, data processing and a model construction (in five different versions). The output of the diploma thesis is a model of the batteries collection enabling closer look on take-away routes, The model is based on the distances of take-away routes based on a principle of the utility areas and a role of a transport. The data are obtained from program ArcGIS 10.5 and subsequently handled in program Microsoft Excel. The outputs are the map schemes issuing from five different versions. The first one is showing the current situation, The other one is showing the version of treating units in three largest towns of the Czechia, the third one treating units in all the towns with above 100 000 inhabitants. The forth on eis showing a possibility to have a collection point in each of the county seats. The last one has the same location, but the threating units have higher capacities. The model is general, there is therefore a possibility of using it in modeling for other...
|
|
|
Comparison of different types of commercial lithium-ion batteries
Šindelářová, Anna ; Kazda, Tomáš (referee) ; Libich, Jiří (advisor)
The master's thesis is devoted to the comparison of different types of lithium-ion batteries. Primarily, an introduction to electrochemical power sources and their division is described. Furthermore, the thesis deals only with lithium-ion batteries. In the theoretical part, the chapters discuss the history, the principle of operation and a detailed description of the main battery parts, including used materials. A comparison of commercially available lithium-ion cells with each other as well as with other types of batteries is also included in the theoretical part. The practical part deals with the cyclinf of lithium-ion cells and subsequent evaluation of the effect of temperature on the capacitance and current characteristics of these lithium-ion batteries.
|
guest ::
