|
|
Measurement of meteorological variables
Škorpík, Daniel ; Harabiš, Vratislav (referee) ; Chmelař, Milan (advisor)
This bachelor thesis discusses about the basic meteorological variables, especially temperature and airflow. These magnitudes are measured using an anemometer which uses resistive sensors, namely, two thermistors of NTC type that described technology, operations, methods of scanning, sensor placement and implementation of such a device. After that was designed block diagram and circuit diagram. The meter is realized, than we describe the individual components and then is calibrated and tested. In conclusion, it is evaluated for use in medicine.
|
|
|
The USB Oscilloscope and Logic Analyzer with a Microprocessor
Pešl, Jiří ; Magát, Martin (referee) ; Šteffan, Pavel (advisor)
The content of this bachelor thesis is design of electronic measurement and diagnostic device to a computer or any other portable device as are modern mobile phones and PDAs. Designed system will be measure analog periodical signals in time in currently used ranges and discrete logic signals. Signals will be restored and displayed on the screen of any other device. Wherewith designed device will be communicate through USB 2.0 or Bluetooth interface.
|
|
|
Design of EMC optical converter
Štěpánek, Adam ; Hruboš, Zdeněk (referee) ; Krutílek, David (advisor)
Master's thesis is focused on designing optical converter for EMC measurement transfering signal through noisy enviroment. First part contains analysis of electromagnetic interference and its coupling and measurement, especially types of probes for interference maesurement. Next part passing through designing of optoelectric and electrooptic converter with digital intensity modulation. Last part is about realization of optical converter.
|
|
|
Extension interfaces for FPGA developent board
Čáslavský, František ; Pavlík, Michal (referee) ; Bohrn, Marek (advisor)
This work deals with design of expansion modules for development kit Spartan-3 Starter kit. The objective of the work is to design modules with audio input and output and modules with video input and output. This work consists of exploring possibilities of connecting the modules, designing the modules, choosing suitable components for production of the modules, manufacturing prototypes, creating of software and user manuals. These modules will be utilized in lessons and will contribute to the possibility of exploring the VHDL programming language in greater depth.
|
|
|
Universal Microcontroller Unit
Kulenda, Vít ; Hynčica, Ondřej (referee) ; Kučera, Pavel (advisor)
Master’s thesis contains description parameters of microcontroller ATMEGA644P, also contains differences between older and newer version of microcontrollers ATMEGA644 and ATMEGA644PA. Inside structure of microcontroller, memories and peripherals are described here. The construction of the universal microcontroller unit is main target of this thesis. The unit contains supply, A/D converter, current loop, communication interfaces, temperature sensor, accelerometer and other. The unit collects and saves data, communicates by interfaces and manages other functions. Using devices and circuits are described in this thesis. Development of software for microcontroller(firmware) are positioned to last part of this thesis. This software control functions of all parts positioned on the unit.
|
|
|
Automated measuring device for testing ELNEC programmers
Pražák, Jiří ; Štohl, Radek (referee) ; Šedivá, Soňa (advisor)
This thesis deals with the verification of parameters of Elnec BeeHive304 programmers. First, the reader is briefly introduced to the Elnec BeeHive304 programmer. Much emphasis is placed on the previous manual parameter verification. The aim of the work is to design and implement possible solutions for automation of the measuring process. In the main part of the thesis, two prototypes of a suitable automatic electronic measuring instrument for automated parameter measurement of the Elnec BeeHive304 programmer are designed and implemented.
|
|
|
Program for test devices
Lapčák, Adam ; Duz, Aleksei (referee) ; Novák, Lukáš (advisor)
The purpose of this thesis is a design and realization of a device, which is designed for commissioning and testing of a device that processes data from scale tensiometers for the IoT database (tested device). The main two parts of a designed device are a microcontroller programmer and a tester. The device being tested is checked for the voltage in important nodes of the circuit, data validation from serial UART lines and status signals. The simple and quick connection between those devices is realized by spring-loaded pins. In addition to the design and realization of the device, the thesis also deals with the creation of a testing program that ensures data collection and store it in the microcontroller's memory for further error analysis of the tested device. The additional part is a control of the device and a visualization of the detected data in the PC application. Communication of the tester microcontroller with the PC is mediated by the USB/UART converter.
|
|
|
Ambulant Cardiac Monitor
Vaníček, Aleš ; Strašil, Ivo (referee) ; Číž, Radim (advisor)
This thesis describes the design and practical realization of a prototype mobile, battery-powered device that is able to periodically recording electrocardiogram and fotopletysmogram or blood pressure. Data from these periodic scanning is processed by microcontroller and stored on a memory card which is part of the proposed device. The device can be connected to a PC via USB like a virtual serial port.
|
|
|
Multimode VHF Broadcasting Receiver
Hradňanský, Vladimír ; Ing. Vladimír Hubík, Ph.D, (referee) ; Šebesta, Jiří (advisor)
The aim of this work is to design a microprocessor-controlled multimode VHF radio can receive AM, FM and DAB. The first step is to become familiar with digital radio broadcasting DAB and RDS. Then we can proceed to the design of the receiver circuit solution using modern component base. Next it is necessary to write utility software and construct a prototype of receiver, verify its functionality and parameters. The result of the work is the multi-mode VHF broadcasting receiver controlled using touch screen display and supported by web management.
|
|
|
Digitalization of the optical intensity distribution scanning
Škrob, Robin ; Hudcová, Lucie (referee) ; Křivák, Petr (advisor)
This Master’s thesis solves a design and construction of device for gathering and transfer of data into computer. The device should replace graph plotter, by which is measured the optical intensity of a laser beam. From this characteristic it is possible to determine other parameters of the laser beam, such as halfwidth of the beam, angle of divergence and Rayleigh length. The described device - “data gatherer” - measures two voltage values – voltage detected on photodiode and voltage detected on distance moved by photodiode. Measured values of voltage are processed and sent through a serial line into the computer. A pre-amplifier is connected to the control part for both channels of measured values with possibility of amplification. Computer application, which performs graphic interpretation of the measured values, serves as user control peripheral. The product of this project is compact device operating under OS Windows with graphic output.
|
guest ::
