|
|
Solution to the mechanism of a screw jack
Blecha, Jan ; Osička, Karel (referee) ; Kalivoda, Milan (advisor)
The presented bachelor thesis deals with the mechanism of the screw jack in terms of basic design calculations as well as in terms of production technology. The following part deals with basic division of the workshop lifting equipment, the design of the lifting device and, last but not least, the design of the production technology. Further attention is paid to the technical and economic view of the manufacturing process of the screw jack mechanism and the possibility of improving both the production process and the construction itself.
|
|
|
Analysis of the operating costs of the machining process
Šikula, Josef ; Osička, Karel (referee) ; Prokop, Jaroslav (advisor)
This master’s thesis deals with the operating production cost in machining process and further optimalization. Individual costs items which are related to machining process are specified. Attention is paid to the time consumption of individual machining methods. The aim of the thesis is to find an optimal combination of cutting speed and durability in order to meet the minimum cost criteria and maximum productivity. The calculations are used for turning the outer cylindrical surface and the face surfaces at a constant cutting speed. The work is accompanied by tables and calculations in Microsoft Excel.
|
|
|
Testing of Chosen Milling Tool for Machining of Hardened Steels
Talaš, Jan ; Sliwková, Petra (referee) ; Sedlák, Josef (advisor)
This Bachelor thesis studies the testing of a milling tool and the determination of appropriate cutting conditions for machining. The first part of the thesis focuses on the theoretical introduction to milling, end mill wear, and coating. It also explains the term high-hardened steel. The next part is practially oriented and involves graphical and numerical evaluation of measured values. The last part deals with the machining economy.
|
|
|
Optimization of production steering shaft
Hlavinka, Martin ; Kalivoda, Milan (referee) ; Jaroš, Aleš (advisor)
Bachelor thesis deals with the creation of the optimal divided chip in the turning technology. The material for production of the steering shaft is steel C35RC suitable for forming and turning from which semi-finished products are produced at horizontally forming presses. They are machined at the production robotized line where the problem with the undivided chip arises. For the specified set of cutting conditions the uses the cutting tools which aren’t very suitable for the given types of technological operations. The recommended values of cutting conditions are different from the specified set of cutting conditions. The result will be choice of new-cutting tools for turning technological operations to shape short divided chip.
|
|
|
Optimization of Machining Parameters Abradable Sprayed used in the Aerospace Industry
Krajkovič, Pavel ; Osička, Karel (referee) ; Kalivoda, Milan (advisor)
This thesis is focused on machining of thermal spray coatings. Particularly on testing of machining parameters and their influence on different types of abradable coatings used in the aerospace industry. The aim of research work is to test the parameters, measure cutting forces by using a dynamometer and their impact on the quality of the machined surface. Determination of the optimal machining parameters for different types of coatings based on results of measurements and the evaluation of surface quality. There are also presented techniques of thermal spray application and methods of coating evaluation. Further it describes a method of measuring cutting forces by using the dynamometer and methods of surface quality evaluation.
|
|
|
An innovation of the CNC production of the disc-shaped parts
Křupka, Marek ; Humár, Anton (referee) ; Píška, Miroslav (advisor)
The optimal choice of cutting conditions, as well cutting tool, has a significant effect on the quality of machined part and is an essential parameter to reduce the cost of production. This thesis describes CNC turning process of disc springs made of 51CrV4 material, especially using new cutting tools and the use of higher cutting speeds. A comparison of four manufacturers of cutting tools in terms of surface quality, tool path and the machined material volume will be introduced. It was experimentally verified that our proposed facility has achieved the best result.
|
|
|
Optimalization of operating costs machining of process
Dostálová, Markéta ; Osička, Karel (referee) ; Prokop, Jaroslav (advisor)
This work deals with operating production costs in machining process and further optimalization. In the first chapter, individual costs items which are related to machining process are specified. These cost items are quantified and total production costs are acquired. Optimalization of operation production costs are described for criterion of minimal production costs and criterion of maximal productivity are described in next chapter. Practical part of this work is focused to apply each individual criterion in practical example. There is CD with programs attached to this work. The goal is to find optimal combination of cutting speed, sufficient life time of cutting tool and suitable cutting technology so that chosen criterion can be acceptable.
|
|
|
Construction design of woodworking machinery
Doležal, Martin ; Pavlík, Jan (referee) ; Holub, Michal (advisor)
This thesis deals with designing woodworking piece of machinery for thicknessing technology, surfacing planer, cutting and mortising, which are combined by changeable adapters. Thesis cointains a survey of selected woodworking machinery and technologies. It also provides an overview of safety rules for manipulation with woodworking machines and also safety features the machinery must comprise. The technical evaluation is included.
|
|
|
Economic analysis of machining process
Kalnaši, Radoslav ; Osička, Karel (referee) ; Prokop, Jaroslav (advisor)
This master’s thesis focuses on analysis of time consumption of machining process, the basic units of operating costs of production,optimization and subsequen tapplication to specific part. It is a turning shaft in two operations, named roughing and finishing turning. The aim is to find the optimum combination of life time of cutting tool and cutting speed, which is the main criterion for optimization in terms of minimum production cost or a maximum of productivity.
|
|
|
On The Analyse of High Productive Reaming Technology
Gashkova, Irina ; Slaný, Martin (referee) ; Píška, Miroslav (advisor)
Diplomová práce se zabývá analýzou technologie vysoceproduktivního vystružování. V rámci práce byly provedeny testy vystružování za různých technologických podmínek (vc=40, 60, 80, 100 m/min; f=0.2, 0.4, 0.6, 0.8 mm) na materiálu austenitické oceli DIN 1.4404 při použití vystružovací hlavicí MT3. Jednotlivé operace vystružování byly porovnány z hlediska parametrů jako tlačná síla, krouticí moment, výsledná drsnost obrobeného povrchu a dále z hlediska tvaru třísky. Následně byly vypočítány průměrné hodnoty a směrodatná odchylka naměřených parametrů. Dále bylo provedeno porovnání pomocí diagramů. Výsledky ukazují lepší kvalitu, nižší drsnost povrchu (Ra 0,37 µm) a méně zdeformovanou třísku při pomalejších řezných rychlostech (40 m/min) a menším posuvu na otáčku (0,2 mm). Výsledky také ukazují nárůst tlačné síly a krouticího momentu za uvedených technologických podmínek. Při zvyšující se řezné rychlosti vystružování tyto silové účinky klesají.
|
guest ::
