|
|
River regulation and designing flood protection
Úlehla, Jiří ; Špano, Miroslav (referee) ; Duchan, David (advisor)
This thesis focuses on assessing the capacity of the river channel Becvy in the urban area of Prerov and design of flood protection for the city. Flood protection was designed in two variants. In the first variant dealt with recess bottom of the river. The second variant included a proposal of flood protection wall combined with a mobile barriers. The results are summarized in the synoptic maps.
|
|
|
Analysis of traffic lanes joining processes
Mikolášek, Igor ; Všetečka, Martin (referee) ; Holcner, Petr (advisor)
The aim of this paper is to analyse the behaviour of the traffic flow at an area of merging traffic lanes where an application of the zip rule is expected, accoding to the law no. 361/2000 Sb. “o provozu na pozemních komunikacích”. Žabovřeská street, part of the VMO Brno, in the direction from Královopolské tunely to Hlinky interchange was chosen for observation and measuring. Observation, first-hand measurement, radars, and other available means were used for data collection. On the basis of data analysis, several suggestions for improvements are made. These are aimed at increasing the bottleneck capacity. One of the suggestions is tested in a simulation program Aimsun.
|
|
|
Application of LEAN and TOC to solve the problem of low capacity of fabric cutting machine.
Šimon, Jan ; Martínez, Felipe (advisor) ; Hykš, Ondřej (referee)
This thesis deals with the application of the methodology LEAN and TOC to solve the problem of low capacity of fabric cutting machine. The aim of the thesis is to apply LEAN and TOC methodology to propose solutions for continuous improvement of cutting process. To solve the problem itself is used mainly principle of five focusing steps, which is based on the theory of constraints and which is described in the theoretical part of the thesis. The theoretical part also introduces some methods and tools of lean management, which are already in place in the company BOS Automotive Products CZ, s.r.o, also their specific applications are demonstrated. During research was identified a potential source of continuous improvement. This source are data that constantly sends cutter during operation. In conclusion are summarized results and suggestions for improvement based on the used principles and recommendations for further improvement.
|
|
| |
|
| |
|
|
Callcentrum System Management in a chosen Firm
Guzi, Jan ; Černý, Jan (advisor) ; Novák, Michal (referee)
This thesis deals with operational management of an inbound call center and planning necessary work capacities. Company BEZREKLAMKY Ltd. established its own inbound call center, as a reaction to the dissatisfaction with the services of an external service provider and it is necessary to properly optimize operational capacities and human resources necessary to serve 5 to 7 thousand customer callers per month. Practical part of the thesis - planning of the workforce capacity, scheduling the shifts and planning the opening hours of the inbound call center - works with a rather extensive theoretical platform, which brings new views of operations management inbound call centre and also works with the internal and external surveys related to the functionality of newly established inbound call centre. Conclusions made on the basis of the theoretical part were applied directly to the planning and operational management of the inbound customer call centre. This thesis helped applied over 25 conclusions for the studied inbound call centers. The goals, which the company set out to fulfill, while planning the new department, are then partly validated via models of system dynamics and in the last section of the thesis reflects on the extent to which these goals are feasible.
|
|
| |
|
|
Problems and measurements of the basic electrotechnical quantities
BOHÁČ, Radek
The purpose of this thesis is selection and specification of basic teaching methods used in heavy current laboratory during vocational training education at secondary school. Basic methods for electrical values measurements in heavy-current laboratory, measuring instruments basic division and measured electrical values evaluation. Further, basic measurement of electrical values, current, voltage, power, resistance and capacity are specified here.
|
|
|
Implementation of improvement methods of industrial production
NOVÁČEK, Tomáš
Nováček, T. Implementation of improvement methods in manufacturing. České Budějovice 2010. Bachelor thesis. Jihočeská univerzita v Českých Budějovicích. College of education. Department of physics. Supervisor Ing. Michal Šerý. This thesis describes a real application of improvement methods in manufacturing. The methods are applied to the obsolete line having the attributes of industrial production 80th of the last century. The main objective of the project is to build a new, robust manufacturing process to a logical flow with adequate capacity of produce. Next, process must be effective and with low risk of customer complaints manufactured products. On this occasion, it was necessary to apply modern methods to analyze the current state and the future state. During the construction of benches are accounted and described the principles of ergonomics in order to minimize the burden on the line for workers and prepare them to working conditions that they work effectively achieved without losses.
|
|
|
Doing Business in Multimodal Transport - its Specifics and Benefits
Nachmüllerová, Kamila ; Eisler, Jan (advisor) ; Novotný, Milan (referee)
Diplomová práce popisuje oblast podnikání v nákladní multimodální přepravě s užším zaměřením na přepravu produktů potravinářské kvality. V teoretické části jsou uvedeny obecné informace o tomto druhu přepravy. V praktické části, na příkladu konkrétní přepravní firmy byla provedena analýza podnikatelských příležitostí na českém trhu, segmentace zákazníků a analýza konkurence v oboru. Nezbytnou součástí rozboru je i analýza odvětví jako takového. Důležitou částí diplomové práce je kapitola č. 6.5, která identifikuje nejdůležitější kritéria rozhodování zákazníků při výběru přepravní firmy a definuje hlavní kritéria dopravní firmy při výběru zákazníků. Dále je klíčová celá kapitola 8, která poukazuje na výhody, užitek a jiné benefity multimodální přepravy zboží a mohla by být určitým vodítkem pro zákazníky při rozhodování o výběru přepravní firmy.
|
guest ::
