|
|
The Roofing of the Sport Hall
Müller, Radek ; Šmak, Milan (referee) ; Buchta, Stanislav (advisor)
In my project I dealt with a proposal pool roof in the town of Brno. As the main construction material was used glued laminated wood. For affiliate structure was used steel and solid wood. Construction has a span of approximately 40 meters, length 60 meters and a height about 11.5 meters. For a given type of structure and for aesthetic and ergonomic reasons, decided to design a curved beam of glued laminated timber supported by a pillar of glued laminated timber. End of the cantilever beam is supported by a steel column.
|
|
|
Gas station roof structure
Očadlík, Martin ; Šmak, Milan (referee) ; Bajer, Miroslav (advisor)
My task was to propose and consider steel structure roof of gas station. Dimensions of construction were determined based on transport service of the 8 supply points. Construction is situated in Zlin. Static calculation of the main bearing elements was made with Dlubal RFEM v.5.03 software. Selected structure elements including joints and column anchors were verified manualy.
|
|
|
The roof structure of the sport hall in Mikulov
Sochorec, Michal ; Barnat, Jan (referee) ; Šmak, Milan (advisor)
Bachelor’s thesis describes design and static assessment of the roof structure of sport hall in Mikulov. Specifically the roofing of the two tennis courts and surrounding stands. Thesis examine several alternatives of design of roof structure like plate girders from glued laminated timber or truss girders made from solid wood. Girders span is 19 m above each tennis court. In the static calculation are assessed individual supporting elements and their connections. The thesis also includes fire resistant report of some elements of roof structure. Static analysis has been accomplished by student version of the SCIA Engineer 14 software.
|
|
|
Steel structure of a hall
Kerouš, Jakub ; Buchta, Stanislav (referee) ; Sýkora, Karel (advisor)
This bachelor thesis deals with design steel structure of industrial one-aisle hall with span of 30 m, length 63 m and height of the holder of a crane track girder 9,3 m. The hall is designed with two overhead cranes with load 50 t and 32 t. Structure is designed from steel S420. Roof structure is designed in two versions. These versions are compared by weight and better version is processed in detail. Drawings contain platforms of both versions, two cross sections and manufacturing drawings of truss.
|
|
|
Steel structure of swimming pool roof
Krchnák, Martin ; Barnat, Jan (referee) ; Štrba, Michal (advisor)
This bachelor thesis describes the design and assessment of steel structure of the swimming pool roof. The supporting structure of hall has 40.00 meters span, 50.00 m length and 10.53 m height. Main construction material is steel, grade S355 and S235. There were compared 2 possible variants of the roofing, and one of them was calculated in detail. There is developed a static analysis of the main load-bearing parts of the structure, including joints and selected details. The supporting structure of roofing consists of the polygonal wrapped lattice structure made of steel circular in the transverse direction.
|
|
|
The roof structure of the industrial hall in Kyjov
Nosková, Nela ; Pilgr, Milan (referee) ; Šmak, Milan (advisor)
The Bachelor´s thesis describes design and static assessment of the main roof structure supporting elements of the roof structure of the industrial hall in Kyjov. The hall is designed from timber. The aisle is rectangular floor plan 17,0 x 40,0 m. The main bearing structure causes as a frame truss supported by columns. Solid frame is made from solid timber C24. Purlin is designed from solid timber C24. The static calculation also includes fire resistance reports of single elements. Static analysis has been accomplished by student version of the SCIA Engineer 2012 software.
|
|
|
Tennis hall
Mynaříková, Alice ; Straka, Bohumil (referee) ; Sýkora, Karel (advisor)
The Bachelor’s thesis describes the design and check of the construction of a tennis hall. I have chosen the design of glued laminated timber in combination with solid timber. The plan dimensions of the hall are 23.275 x 67.375 m. The work includes by a technical report, a design calculation, a statement of material and design documentation. Next, the work deals with a special wall system.
|
|
|
Steel load-carrying structure of production hall with bridge crane
Štulrajterová, Terézia ; Melcher, Jindřich (referee) ; Karmazínová, Marcela (advisor)
This bachelor thesis deals with the design and assessment of a steel load-bearing structure of a two-aisle production hall. That hall has a rectangular ground plan of a width 32 m (20 + 12 m) and lenght 54,54 m (9 modules distanced 6 m from each other). The main aisle is 10 m high and inside is located a overhead crane with carrying capacity 5 t. The second aisle is used as a storage area for materials that have already been produced. The skeleton of production hall is made of a ten transversal bindings. Lattice trusses are hinged mounted on constraint pillars of solid poles. The hall is situated in the north of the Czech Republic in the city of Děčín.
|
|
|
Load bearing structure of an exhibition pavilion
Janíková, Dita ; Bajer, Miroslav (referee) ; Sýkora, Karel (advisor)
The goal of this bachelor thesis is to design load bearing steel structure of an exhibition pavilion. The grand plan dimensions are 36 to 36 metres and construction height is 9,5 metres. The construction is designed for the district of Brno city. In the structural anlysis there were the following main load bearing structural elements designed and examined: the solid purlin,solid side runner, panel gridertrusses,bracin and solid pillars. The structure was designed to fulfill the particular functionality but also the aesthetic and economic aspects. The thesis includes design documentation composed of layout drawing and drawing of selected details.
|
|
|
The Roofing of the Sport Hall
Tichák, Tomáš ; Sýkora, Karel (referee) ; Buchta, Stanislav (advisor)
The main purpose of this work is a design of timber frame roofing structure for multi-purpose sports hall. The building has rectangular shape 50 meters long, 35 meters wide and 16 meters high. Main support element is glulam timber two-hinged arch. Structure consists of glued laminated timber elements, as well as solid-sawn timber and steel ones. This document includes design, internal force enumertion ans structural assessment, including joints. Dlubal RFEM 5 structural analysis and design software has been utilized in the process. Drawings of the structure are enclosed.
|
guest ::
