|
Microstructural evolution of equal-channel angular pressed IF steel
Krajňák, Tomáš
Equal channel angular pressing (ECAP) belongs to advanced technologies for improving mechanical properties of materials. In the present work the influence of number of pressing by route BC on grain size, density and type of dislocation, evolution of microstructure and mechanical properties of IF steel has been investigated by means of optical microscopy, electron back-scattering diffraction (EBSD), diffraction profile analysis, microhardness testing and tensile deformations. It has been found, that the grain size decreasing with increasing number of passes. Simultaneously, the microhardness, density of dislocation and maximum true strength has been increased. The evolution of microstructure with increasing pressing number, particularly the forming of high-angle boundaries has been also examined.
|
|
Structure and Properties of Sintered Tungsten Carbides
Novotná, Hana ; Klakurková, Lenka (referee) ; Čelko, Ladislav (advisor)
This bachelor thesis deals with the structure and properties of sintered tungsten carbides. The literature review section concerns the development of sintered carbides, their composi-tion and structure, different types of carbides, the steps of the production of sintered car-bides, sintering technology and alternative materials for cutting tools. The experimental section deals with composition of WC-Co and is ascertained by the dependency coercivity on WC grain size and also on cobalt content. This work describes the measurement of WC grain size and measurement of the coercivity, one of the fundamental properties of sintered carbides.
|
|
Quantitative description of textures in volcanic rocks: Case study of trachybasalt from Dubičná
Ditterová, Hana ; Dolejš, David (advisor) ; Rapprich, Vladislav (referee)
- iii - ENGLISH ABSTRACT Quantitative description of textures, in particular, the distribution of grain sizes, is becoming a powerful tool for interpreting kinetic processes that govern crystallization of igneous rocks. Variation in grain size are frequently represented by logarithm of population density vs. linear crystal size, where the majority of igneous rocks forms a linear trend. Its slope provides an estimate of characteristic grain size, or growth rate and crystallization time, whereas the intercept provides the nucleation density. The log-linear trend is predicted to result from kinetic nucleation and growth processes only, whereas its modifications such as kinks or curvature are due to mechanical separation or accumulation of crystals, magma mixing or Ostwald ripening (coarsening) in the presence of melt. In order to investigate the true, three-dimensional crystal size distribution, the raw two-dimensional data acquired from thin sections or rock slabs must be processed by various stereological methods. We illustrate application of quantitative textural measurements to distribution and origin of clinopyroxene crystals in a trachybasaltic lava flow from Dubičná near Úštěk. This effusion belongs to Cenozoic volcanic products in the Bohemian Massif, specifically to its main Eocene-Miocene stage in...
|
| |
| |
|
Composite Dental Biomaterials - Structure, Analysis and Properties
Matoušek, Aleš ; Vaněk,, Jiří (referee) ; Lapčík,, Lubomír (referee) ; Cihlář, Jaroslav (advisor)
The aim of this work is to define relations between grain size and bioaktivity of oxide ceramics, specifically ZrO2, Al2O3 and HA. Ceramic materials with grain size from 100 nm up to 10 m, with various surface roughness, were tested for its bioactivity. Ceramography analysis was performed for all tested materials to precisely describe microstructures. Biological properties of the ceramic materials were tested via dilation tests directly in-vitro and by in-vitro extraction. Three cell culturing lines: osteoblast MG63, fibroblast L929, and epithelioid HeLa, were used for our testing. An influence of the grain size on the biological response was only found for the ceramic materials which had been thermally etched. The thermally etched nanocrystalline samples had larger areas covered by cells than ceramics with coarse grain microstructure. Biological tests on layered composites Al2O3×ZrO2 showed the cell selection determined by the type of material, where ZrO2 surfaces were preferably covered. Improved biological response of nanocrystalline ZrO2 was demonstrated on ceramic ZrO2, Al2O3 and SiO2 substrates with nanocrystalline coating of ZrO2. In this work a novel technological process for the formation of defect-free coatings was developed. Sintered coatings were tested using in-vitro technique with cell line HeLa, L929 and MG63 for up to 72 hours. The results of the biological tests of nanocrystalline coatings were consistent with results from the bulk nanocrystalline thermally etched ZrO2 ceramics.
|
|
Development of industrial floors with utilization of by-product
Radějová, Lucie ; Durica,, Tibor (referee) ; Bydžovský, Jiří (referee) ; Ševčík, Milan (referee) ; Drochytka, Rostislav (advisor)
This work deals with the use of waste materials in the development of new industrial floors. The main task of this work is to choose a suitable waste materials, and design a new material using such materials, while achieving the required physico-mechanical properties. The aim of this work is also to verify the effects of process application, suitable microfiller and final coat and propose a suitable alternative industrial floors, which would not only be in terms of economic efficiency, but also in terms of ecological suitable replacement for commercial products.
|
|
Microstructure and Mechanical Properties of Steels
Stavinoha, Jakub ; Pavloušková, Zina (referee) ; Molliková, Eva (advisor)
This bachelor’s thesis is concerned with studies of relationships between grain size and mechanical properties of steels. Theoretical part deals with structure of the steels, with reaction of the material to the external stress, methods of estimating the grains size and strain-stress diagrams. In the practical part there are evaluated scratch patterns and strain-stress diagrams of steel C10E4Cu3+N. The conclusion of thesis includes the evaluations of the results from practical part and comparison with the theoretical part.
|
| |
| |