|
|
Heat transfer solution of solidifying steel system with phase change with moving edge conditions
Fedorko, Tomáš ; Mauder, Tomáš (referee) ; Štětina, Josef (advisor)
Cílem diplomové práce je vytvoření 2D numerického modelu pohybujícího se řezu s proměnnými okrajovými podmínkami skutečné geometrie plynulého odlévání a chlazení předlitku v prostředí MATLAB. Model se zabývá vysoce nelineárními termofyzikálními podmínkami oceli během tuhnutí a chlazení. V práci je simulovaná nejen nelinearita termofyzikálních podmínek, ale také nelinearita při fázové změně. Fázová změna je modelovaná pomocí metody entalpie, metody zdánlivé kapacity a metody teplotního zotavení. Všechny výsledky práce jsou porovnány z více hledisek, jako např. z hlediska přesnosti, rychlosti výpočtu, nebo vhodnosti časového diskretizačního kroku pro nelineární problémy, a paralelizace.
|
|
|
Computational modeling of radial hydrodynamic bearings for water machines
Pokorný, Jan ; Šimek,, Jiří (referee) ; Návrat, Tomáš (advisor)
The aim of this thesis is to calculate the stiffness and damping coefficients for radial hydrodynamic bearings. Cylindrical and lemon hydrodynamic bearings are considered. The solution to this problem mainly depends on the hydrodynamic pressure in the bearing. The numerical solution of the Reynolds equation is used to calculate the pressure. The effect of variable viscosity and density of the lubricant due to temperature changes is considered. The static equilibrium position of the journal centre is also solved. The stiffness and damping coefficients are determined using small amplitude journal motions about the equilibrium position. Three methods for determining these coefficients are presented. The outcome of this thesis is an algorithm for the calculation of stiffness and damping coefficients for cylindrical and lemon bearings. Results for lemon bearings are presented and comparison with the commercial software DynRot BR is made. The benefit of this thesis is the creation of an algorithm for the calculation of journal centre equilibrium position, a new way of incorporating the temperature changes in the viscosity and the density of the lubricant, and the modification of a method for calculating stiffness and damping coefficients based on experimental analogy.
|
|
|
Analysis of Methods of Differences for Partial Differential Equations Solving
Zpěváková, Jana ; Zbořil, František (referee) ; Šátek, Václav (advisor)
In this thesis, we discuss the numerical solution of ordinary differential equation and numerical methods of solving partial differential equations. We propose and implement an application, that converts partial differential hyperbolic equation to a set of ordinary differential equations using finite difference method. After that, the system of equations is solved using the Taylor method programmed in Matlab environment. Finally, we compare the time complexity of proposed solution with parallel numerical computation.
|
|
| |
|
|
Numerical simulation of sound propagation by difference methods
Prochazková, Zdeňka ; Zatočilová, Jitka (referee) ; Čermák, Libor (advisor)
The goal of this thesis is to introduce the finite difference method (FDM) adjusted for usage in modeling of sound propagation, and other approaches that are used together with this method. These approaches include selective filtering and time integration using the Runge-Kutta method, which has low computer memory requirements. An important topic in modeling sound propagation are boundary conditions. The thesis examines and verifies several types of boundary conditions. Included in the thesis are solutions to example problems implemented in Matlab.
|
|
|
The Selected Stochastic Programs in Engineering Design
Čajánek, Michal ; Mrázková, Eva (referee) ; Popela, Pavel (advisor)
Two-stage stochastic programming problem with PDE constraint, specially elliptic equation is formulated. The computational scheme is proposed, whereas the emphasis is put on approximation techniques. We introduce method of approximation of random variables of stochastic problem and utilize suitable numerical methods, finite difference method first, then finite element method. There is also formulated a mathematical programming problem describing a membrane deflection with random load. It is followed by determination of the acceptableness of using stochastic optimization rather than deterministic problem and assess the quality of approximations based on Monte Carlo simulation method and the theory of interval estimates. The resulting mathematical models are implemented and solved in the general algebraic modeling system GAMS. Graphical and numerical results are presented.
|
|
|
Temperature Profiles Measurement of SMD Packages
Strapko, Jaroslav ; Szendiuch, Ivan (referee) ; Starý, Jiří (advisor)
Diploma thesis mainly deals with temperature management and calculation of temperature profile in oven by using SMD packages (PLCC, 1206) of different thermal capacitance on testing PCB. Above all shows theoretical consecution of temperature profile calculation in oven by using known mathematical method like the lumped capacitance method or finite difference method. Theoretical solution and measured values are compared. Diploma thesis also deals with fixation methods of thermocouples K type on assembly, comparison methods based on known and subexperiment, determines the deficiencies of methods. This thesis can perform as theoretical as well as experimental resource to prediction of temperature profiles of PCB´s with different assembly density.
|
|
|
Techniques of time-domain analysis of interconnects.
Lábsky, Balázs ; Petržela, Jiří (referee) ; Brančík, Lubomír (advisor)
This work deals with techniques of time-domain analysis of interconnects. After a studying crucial issue of time-domain analysis of interconnects methods of modeling and simulation simple interconnects in electrotechnics are described. For transient effect analysis two elementary methods can be used: the state variable method and the FDTD (Finite - Difference Time - Domain) method. The FDTD method can be used to solve partial differential equations in time domain, for instance equations of transmission lines. The method is very effective and delivers satisfactory results in case of linear and non-linear lines with a single “live” conductor. The method can be easily programmed in Matlab.
|
|
|
Optimization in engineering problems
Klepáč, Jaromír ; Popela, Pavel (referee) ; Mrázková, Eva (advisor)
This bachelor thesis deals with optimization in engineering problems. In particular, it focuses on a task of optimal dimensions design of continuously loaded beam with specic requirements on nal beam weight and rigidity. For the purpose of well understanding of all the terms used during solving of an illustrative task, the thesis contains a brief introduction into the optimization problems, ordinary dierential equations, and theory of elasticity as well. Results obtained through optimization in the GAMS software will be checked by analytic solution and compared with an alternative calculation in the ANSYS software.
|
|
| |
guest ::
