| |
|
Motorshow
Bár, Radek ; Vémola, Josef (referee) ; Utíkalová, Ivana (advisor)
This master thesis is focused on elaboration of project documentation for constructing autosalon in Kopřivnice. Project and appendix are processed by current applicable laws, regulations and standarts. Designed object is situated on plat #419/2 and partly on plat #419/27. Both plats are parts of cadastral area of Kopřivnice. There are all needed engineering networks nearby. Object is divided on three functional parts, which are operationally and constructionally connected. First part is exhibition and representative hall, with capacity of 11 exhibited vehicles. Second part is formed by administrative facilities for staff including sanitary facilities for both staff and visitors. Third part is service for personal and light commercial vehicles with three working stations. Construction is designed partially reinforced concrete columnar structural system and partially of brick longitudinal structural system. The biggest plan dimension of building is 34.3x35.15m. The cladding is designed of sandwich blocks LIVETHERM tl.400mm. Roof of building accross the surface is flat roof with several height levels. Establishment of the object is a combination of footings and foundation belts. Cladding of exhibition hall is more than 50% glazed. Parts of service and autosalon are designed as sigle storey objects, while administrative part is designed as a two.
|
|
Preparation and organization of the production area's construction facility
Řeháček, Martin ; Stehlíková, Jana (referee) ; Vlčková, Jitka Laura (advisor)
This master’s thesis relate to the preparation and organization of the production area’s construction of the SPEDUR company in Žďár nad Sázavou. The thesis contents technical report on the construction technological project, construction site, time plans, project of the equipment site, draft of the mechanisms, control and testing plan, environmental plan, risks of safety and health at work and calculation for this construction.
|
|
Logistic Centre
Hrobař, Pavel ; Havířová, Zdeňka (referee) ; Lavický, Miloš (advisor)
This thesis deals with proposal detached three-storey office building, which consists of the brick section and monolithic reinforced concrete frame. The building is covered with a flat roof. The design focus is on the overall consistency between spatial, structural, static, fire safety, acoustic and thermal technical requirements. Documentation is prepared for the building construction. The graphical part of documentation has been processed in the AUTOCAD software.
|
|
Commercial building
Krejčová, Dita ; Utíkal, Aleš (referee) ; Utíkalová, Ivana (advisor)
An intention of this thesis is to create a project documentation of commercial building. This house is situated at the edge of Brno. Ground plan of this three-floored partly basement house is designed as broken shape. Roof of this building is designed as flat. This building is used as a company headquarters and a stock.
|
|
Municipal Office Rapotín
David, Tomáš ; Daněk, Lukáš (referee) ; Utíkalová, Ivana (advisor)
The diploma thesis deals with the administrative building, which will serve as a municipal office in Rapotín. The building is designed as an extension to the existing cultural center Rapotín. The building structure is made as a masonry construction with ceiling construction of prestressed panels Spiroll. Single-layer flat roof is divided into two levels, the lower part is extensive green roof and the top of the roof is made such as usual flat roof. The building has two floors and partial basement coverage as well. The building is provided with four sheltered parking lots.
|
|
Administrative building - OPAVA
Kováč, Lukáš ; Šuhajdová, Eva (referee) ; Šuhajda, Karel (advisor)
The content of the master‘s thesis is processing of project documentation for administrative building in Opava, first done as a feasibility study and then as a pilot project. The object is standalone, with four floors and basement. The work also comprises the thermal technical assessment chosen constructions, the fire protection report, the accompanying report and the summary technical report.
|
| |
|
Multistorey administrative building
Gášek, Libor ; Bažant,, Zdeněk (referee) ; Čírtek, Ladislav (advisor)
The theme of the work is design of the administrative building with supporting concrete structure. The design must include changes of concrete cubic capacity and their additional effects on the stress of the structure. Minimization of the impact of additional stress is necessary to solve with the appropriate design of structural systems and materials.
|
|
Administrative building
Biroščáková, Ivana ; Štrba, Michal (referee) ; Barnat, Jan (advisor)
The task of my master´s thesis was to work up a project and a check of a bearing steel construction the multi-storey office building with a garage in Brno. The building is composed of five storey office section and two storey of garage. Ground dimension of administrative part is 38,8m x 35m with distance of pillars 7m,6m and 6,4m. The structural height of floor is 3,5m.Garage is designed with dimensions 36m x 24,8m with structural height of floor 3,5m. Distance of pillars is 5,6m, 6,4m and 7,8m.Total height building is 17,5m
|