|
|
Ultrasound desintegrator of concrements
Straka, Petr ; Čížek, Martin (referee) ; Rozman, Jiří (advisor)
This thesis is focused on the methodes of crushing kidney’s concrements with continual wave for the frequency 27 kHz and the intensity of ultrasound 10 W/cm2. The main aim is design of the ultrasound head with layer converter and design circuitry. First part of this work describes physical principle of ultrasound, ultrasound waves and methods by which could be remove kidney’s concretions. Practical part of this work is focused on compreshive design of ultrasound crushing system. In the introdiction is analyzed the proposal of applicator and the next step decscribing proposal excitation generator. The work contains results of simulation which was done on proposal curcuit, drawings of scheme, list of components and drawing of PCB.
|
|
|
Development of wireless rumen probe
Šídlová, Ludmila ; Matěj, Zdeněk (referee) ; Fedra, Zbyněk (advisor)
The aim was to study the possibilities of wireless transmission from the stomach of ruminants and to design and implement wireless ruminal probe. The first part deals with the internal wireless probe. The next section describes and evaluates available ruminal probe. There is given its own equipment design in the other chapters. The probe was designed for power management and for working with harvestable ambient power. The frequency of 125 kHz with bipolar coding was chosen for wireless data transmission. Two air coils are used on both sides as antennas. The proposed probe was designed and wireless data transmission was tested.
|
|
|
Microwave transverter for 5 760 MHz to 146 MHz
Šustr, Jan ; Šnajdr, Václav (referee) ; Lukeš, Zbyněk (advisor)
This work deals with a design of the microwave transverter for 5 760 MHz to 146 MHz. It is divided to a few parts. The first one is focused to design of the local oscillator which generates the signal at frequency f = 116.9583MHz. The oscillator is designed like a crystal oscillator. Its output signal is multiplied and amplified in a second part. The next parts deal with design of the band pass filters. There I chose the design of the filters and did the measurements. The microwave receiver and transmitter circuits are designed with the modern monolithic circuits. The main job of this part is to design low noise amplifier and the power amplifier. At the end of this work I do the measurements and the comparison with the simulations.
|
|
|
Program for design of CATV
Sedláček, Jan ; Hála, Ondřej (referee) ; Říčný, Václav (advisor)
The main task of this master’s thesis is to create an interactive computer programme for the design of small and medium television cable circuits. The first part of this document describes main conceptions of a modification and a distribution of television signals. There are also introduced basic topologies of small and medium sized distribution networks, some passive and active elements in the circuit including their usage. There is also described an algorithm for calculation of circuit’s values. The second part contains a detailed description of created programme with all of its functions. A part of this document is made by a sample calculation of the four variants of circuit and its comparison with computer calculation. In suplement are included selected parts of source code.
|
|
|
Measurement and analysis of phonocardiographic signal
Všetula, Petr ; Kolářová, Jana (referee) ; Kolář, Radim (advisor)
This work is engaged in measurning and analysis of phonocardiographic signal. Effect of characteristics and parameters of used parts is examined due to quality of measurement of these signals. The emphasis is put especially on the amplifiers and microphones. The measurment is done by measure card PCI6221E. Data processing and analysis is proceeding by the help programmes, which are created in programmatic environmen LabView.
|
|
|
Computer design of the small CATV
Sedláček, Jan ; Slanina, Martin (referee) ; Říčný, Václav (advisor)
Main task of this bachelor’s thesis is to create an interactive automatic programme for designing circuits of individual or small common television aerial. The first part of this document describes main conceptions distribution of television signals, parameters of coaxial cable and also some kinds of signals distortion. There are described some important mathematics formulas used for calculation of coaxial cable attenuation and carrier to noise distance important for computing function of programme. The second part describes a procedure of designing of television cable circuit of individual or small common television aerial and includes prototypal calculation of two real circuits and its comparison with results of computer calculation by which correct function of programme is verified. A part of this document is also made by detailed description of programme and its functions. Source code of created programme is included in the end of this document.
|
|
|
Broadband Lownoise Amplifier
Varga, Kamil ; Havránek, Zdeněk (referee) ; Beneš, Petr (advisor)
The bachelor thesis describes the problems of broadband low-noise preamplifiers and the conditions of their design, including their printed circuit board. Furthermore, the thesis considers debugging and measuring of the most important parameters of these amplifiers. All of these problems are explained on two practical solutions.
|
|
|
2x400W/8 ohms end amplifier
Káňa, Lukáš ; Balík, Miroslav (referee) ; Káňa, Ladislav (advisor)
Submitted text deals with a power amplifier intended for usage in music electronics. First part is related to the common problems of low-frequency amplifiers including principles and individual circuit wiring types. Next part is related to description of self-made power amplifier including wiring scheme diagram. The end of the text concerns about mechanical construction of mounting box and design of possible module layout inside a device.
|
|
|
HF and IF circuits of shortwave radiostation
Šnajdr, Václav ; Vágner, Petr (referee) ; Lukeš, Zbyněk (advisor)
The study, description, design and implementation of selected blocks of multiband shortwave radio station are dealt with in the thesis. Focus is placed on the concept of multiband shortwave radio stations, with an emphasis on high frequency and intermediate frequency circuits. The first chapter is devoted to description of the transceiver block diagram which is designed as superheterodyne. The design of bandpass input filters, intermediate frequency crystal filters and output filters is described. Simulation results and the measured characteristics of the implemented functional blocks are presented. Furthermore, the amplifier circuits which maintain impedance matching of individual blocks are discussed. SSB signal generation in the transmitter part of radio station and final stage power amplification are depicted.
|
|
|
BER Meter for Video Signals
Šimoník, Petr ; Frýza, Tomáš (referee) ; Říčný, Václav (advisor)
The diplomma thesis is dealing with possibilities of Signal to noise ratio measurement by method, which is based on direct measurement. It is chosen the most suitable method – signal and noise separation to two different parallel signal branches, where is measured signal strength in one branch and root mean square value in the other. The thesis is consisted of a concept of detail block scheme of Signal to noise ratio meter, which was designed in terms of theoretical knowledge. Particular functional blocks were circuit-designed, the active and passive parts were chosen and their function were described. There were made simulation and displayed input and output time flows. There is designed the whole connection of engineered Signal to noise ratio meter in the last part of my thesis. The double-sided board of printed circuit is contained too. It was created simple programme for supervisor micro-processor. Thereby were constructed complete bases for realization.
|
guest ::
