National Repository of Grey Literature 24 records found  beginprevious15 - 24  jump to record: Search took 0.01 seconds. 
Administrative and training center building in Humpolec - Project planning implementation of construction
Dvořák, Tomáš ; Hanzelková, Martina (referee) ; Šlanhof, Jiří (advisor)
The diploma thesis deals with the constructive-technological project of the administrative building in Humpolec.This project mainly addressed construction by the building structures, site equipment, implementation of cast-in-place reinforced concrete floor, budget and chronological plan of buildings. The work was based on the project for implementation.
Project planning and management of construction residential houses in the file Štětí
Sládek, Lukáš ; Hanzelková, Martina (referee) ; Šlanhof, Jiří (advisor)
The subject of this thesis is the preparation and organization of construction of residential buildings in Štětí. In the technological regulations deal with all the layers of flooring from the ceiling construction in residential buildings. The objects are hard floors. For floor coverings will be used PVC roofing, ceramic tiles and concrete coating. It will be used for machining of concrete. Next, I will discuss technological instruction, timing, valuation of all technological stages, construction site equipment, health and safety at work. Also here describe the proper allocation of construction processes into sub-processes to technological stage of completion of work most effectively achieve the objective.
Thin-film geopolymeric plasters for exterior application
Ručková, Jana ; Opravil, Tomáš (referee) ; Šoukal, František (advisor)
This thesis is dealing with preparation of exterior thin-layer geopolymer plaster where the effect of supplement of various types of superplasticizers in their different amounts on the quality of geopolymer plaster is studied. The objective of this work is to determine suitable type of superplasticizer which would improve rheological quality of fresh plaster mix, its adhesion to the surface and last but not least would preserve good mechanical qualities of geopolymer binder. In the experimental part initially test subject were prepared from meta-kaolin, water, water-glass, sand and with supplement of various types of superplasticizers in various amounts. These test subjects were tested for compressive and flexural strength. Further workability and adhesion to the surface of these plaster pastes was observed. Geopolymer pastes were also subjected to calorimetric comparison of kinetic processes occurring during solidification and hardening. In order to identify the exact composition of superplasticizers used as rheological modifiers, the infra-red spectrometry of these substances was performed. There was a need to specify the water-glass in more detail as well, elemental analysis was performed on it on radiographic fluorescent spectrometry. To closer identify the structure and distribution of superplasticizer in geopolymer paste the pictures of the mix which was the most suitable for use for exterior thin-layer geopolymer plasters were made on scanning electron microscope. On the same mix radiographic diffraction on the powder samples was also performed which served for phase analysis.
Construction Technology implementation stage of finishing an apartment building in Oslavany
Pelc, Miloš ; Bravenec, Roman (referee) ; Diaz, Yvetta (advisor)
Bachelor’s thesis deals with building technology of finishing works of the apartment house in Oslavany u Brna. The main part of the thesis addresses technological regulations. The regulations solve the technological process of bearing layer, wear layer and, also, inner plastering. The thesis also concerns itself with the block plan, the principles of organization of construction, proposition of mechanical composition, control and test plans, occupational health and safety (OHS/OH&S) and itemized budget with time schedule.
Construction technology stage in the restoration of the building envelope
Křípal, Vladimír ; Novotný, Michal (referee) ; Diaz, Yvetta (advisor)
The subject of this bachelor’s thesis is offering solution for technological stages of regeneration of a building envelope of Primary school Chrast. The thesis includes regeneration of existing plasters and execution of a contact heating systems using polystyrene plates. The thesis describes technological processes, principles of organization of construction, time scheduling, suggestion of mechanical sets, occupational safety and health, quality requirements and itemized budget.
Confectionery workshop in Trutnov. Solution phase of technological internal finishing processes
Dolejška, Lukáš ; Nečasová, Barbora (referee) ; Kovářová, Barbora (advisor)
The bachelor thesis deals with the preparation and organization of technological stages interior and finishing processes in the confectionery workshop in Trutnov. The basis of this work is the budget of technological phase and timetable. It focuses its attention on the technological regulations dealing with masonry inner partitions, plaster and ceramic tiles. This part is followed by the design of building machinery, proposal building site, quality control work, and safety of work and minimization of environmental impact.
Pension PREMIER in Janov nad Nisou, implementation of finishing works
Pavlíková, Jana ; Nečasová, Barbora (referee) ; Kovářová, Barbora (advisor)
In the bachelor thesis I have dealt with finishing work on the top, where I focused on making plaster Hasit and construction of sauna. Plasters are made manually from before-spraying, the core of plaster and final stucco plaster. The construction of sauna lies in the design of the squared timbers. Insulation - PU boards is located among them. The final surface is made use of floorboards, which are made from Scandinavian spruce. The object for which I work processed, is located in a secluded spot in the village called Janov nad Nisou. This is of the changes to the existing layout pension Premier and his extension. As part of my bachelor thesis I'm dealing with technological stage on both objects at the same time.
Modification of dry stuff with lime sludge
Švec, Jiří ; Kovářová, Alena (referee) ; Ptáček, Petr (advisor)
In modern point of view of waste management is desirable to effectively process the grates possible amount of wastes. Sediments from cleaning of mined lime stones contains a lot of clay components, but there is also indispensable share of soft calcite. Especially this can be use in following processing. After firing, where is necessary to set suitable temperature, arises a mixture of soft calcinated lime and remaining dehydrated mineral components. This calcinated mixture could partially replace used binders in dry stuffs.
Extension of the multipurpose building in Melnik, interior and finishing work
Sládek, Lukáš ; Valenta, Michal (referee) ; Šlanhof, Jiří (advisor)
The subject of this thesis is the implementation of technology in the building floor the multipurpose extension of the house in Melnik. This work includes technological regulation, which focuses on the technological stage floor scheduling, which includes finishing as well as budget, safety and site equipment.
Development of Apartment Complex - Block F, Stage 2 "Díly za Svatým Jánem" in Kuřim, interior and finishing work
Běťák, Rostislav ; Kopecký, Lukáš (referee) ; Šlanhof, Jiří (advisor)
The bachelor thesis deals with the inner and finishing works in a apartment building – block F. New building is located in the village Kuřim, in its part „Díly za Svatým Jánem“ on the street Metelkova. The building is located on plot number 2642/431 and it is a new building with twelve flats. The interior and finishing work consist in the design of plasters, flooring, drywall works, painting and assembly works. This work deals mainly with the plaster design. The plasters will be made from the plaster core, the inner stucco or there can be used the other superficial treatments.

National Repository of Grey Literature : 24 records found   beginprevious15 - 24  jump to record:
Interested in being notified about new results for this query?
Subscribe to the RSS feed.