|
Bucket elevators
Cajzl, Štěpán ; Jonák, Martin (referee) ; Malášek, Jiří (advisor)
The aim of this research thesis is to provide an overview of manufacturers that are using buckets for transportation or acquisition of material and the equipment of these manufactures. It is the bucket conveyors, bucket wheel excavators and bucket chain excavators. The next part of this thesis focuses on the theoretical approach towards the calculation when the shape of the surface of the particular material forms a logarithmic spiral. Within the technical part of the calculation this thesis focuses on forms of calculation of individual parts of the elevator. The last part is an overview of transportation materials and their characteristics.
|
|
Project of transport line for dressing corn
Klíma, Petr ; Vrzal, Karel (referee) ; Kašpárek, Jaroslav (advisor)
Subject of this work is a project of transport line for corn dressing. In the document component parts of the transport line are described. As the submitter asked, some existing devices were retained and supplied with missing parts. Some of the missing parts are bucket elevators which transport corn to the cleaner and dressing device. At the end of the transport line there is a frame for easing sack filling and a weighing device.
|
|
Bucket elevator
Havlena, Tomáš ; Pokorný, Přemysl (referee) ; Jonák, Martin (advisor)
The aim of this bachelor‘s thesis is the design of the bucket elevator for transporting grain according to the assignment. The first chapter is a brief literature review which deals with the construction of the elevator. The second chapter is drawn capacitance calculation and design of the drive. In the last part, there is a control of the individual components. The work includes drawing documentacion.
|
|
Innovation of the bucket elevator
Hála, Ondřej ; Frýza, Josef (referee) ; Brandejs, Jan (advisor)
The bachelor thesis deals with the innovation of the bucket elevator. The thesis is focused on design modification of the elevator in the areas where the transported material is settled. Settled material causes decay and subsequent contamination of the fresh material. Main purpose of this paper is to propose design solution to improve cleaning of the feed boot of the bucket elevator. The next innovation deals with the modification of the marking system and efficient series of the elevators.
|
|
Centrifugal bucket hoist
Caletka, Tomáš ; Kašpárek, Jaroslav (referee) ; Jonák, Martin (advisor)
This bachelor thesis deals with an engineering design of a centrifugal bucket elevator with transport height 6.5 metres and transport performance 40 000 kilograms per hour. The thesis focuses especially on a functional calculation of the elevator thanks to which a gear motor, band and bucket are chosen. This is followed by an analysis of a constructional solution with a strength check of a drive shaft and parallel keys as well as a calculation of a service life of bearings. Technical documentation according to the task is attached to the thesis.
|
|
Centrifugal bucket hoist
Kotačka, Petr ; Malášek, Jiří (referee) ; Jonák, Martin (advisor)
This bachelor thesis deals with bucket elevator design for transport of dry, loose and non abrasive materials according to given parameters. In the introductory chapter a short search describes the concept of suggested solution. Functional calculation, designs and checks of individual proposed equipment elements are stated in the other chapters. In the design requirements for centrifugal bucket discharge as well as miscellaneous way of filling are preferred. Appropriate drawing documentation is enclosed with this thesis.
|
|
Bucket elevator
Sklenář, Adam ; Kašpárek, Jaroslav (referee) ; Jonák, Martin (advisor)
This bachelor thesis deals with the design of a vertical bucket elevator for transport of grain. The thesis consists of a description of bucket elevators and their main components, functional calculations and check of the drive shaft. Particular emphasis is placed on the calculation and selection of a gearmotor and subsequent strength check of the drive shaft. The drawing documentation of the entire assembly of the elevator, the elevator head assembly and drive shaft is enclosed with the thesis.
|
|
Conceptual description of the design of bucket elevator
Růčka, Martin ; Škopán, Miroslav (referee) ; Jonák, Martin (advisor)
The topic of this bachelor work is to describe the design process bucket elevator. Work is processed as study material for students of bachelor study. The first part is a basic description of the bucket elevator and its types. Furthermore, the description of the basic parts of the bucket elevator. The second part contains equations for bucket elevator design (design drawing element, buckets, engine). Are given two ways to resolve according to [1, 2] and the conclusion of this work is presented a comparative calculation of these solutions.
|
|
Bucket hoist for grain transport
Valouch, Radek ; Pokorný, Přemysl (referee) ; Škopán, Miroslav (advisor)
The bachelor thesis deals with a construction design of a bucket elevator for grains in accordance to assigned data. In the first chapter, a conception of a proposed solution is introduced. Other chapters focus on a functional calculation, design and checking the individual components of the device. The requirements for centrifugal emptying of buckets and a mixed filling of buckets are taken into account in the design. A drawing documentation is enclosed with the thesis.
|
| |