|
|
Calculation of temperature field of the busbar bridge
Měrka, Ivan ; Maxa, Jiří (referee) ; Vyroubal, Petr (advisor)
This term project’s aim is to theoreticaly analyze thermal phenomena and losses in electrical power devices, describe the design and application of UniGear ZS1 type switchgear, put together a computer simulation model for thermal calculations of current and optimized solution and finally to discuss obtained results and compare them with experimentally acquired values. The main objective of this project is to determine, whether simulation is a viable and reliable enough method, that it could replace the costly real life physical testing. Modelling of the progress of thermal processes in different parts of the examined busbar will be done in computer aided design program Solidworks and its simulation plugin Flow Simulation.
|
|
|
Comparison of CAD programs
BARTOŇ, Petr
My thesis focuses in the first section on product lifecycle management (PLM), CA procedures and explanation of definitions used. In the second part the history is men-tioned and the third describes basic sorting of CAD systems. The most voluminous fourth chapter is dedicted to description of particular systems with their pros and cons and user environment. In the fifth part there are set the conditions of posibility of appli-cation based on interviews with constructers. The CAD programms are usually not che-ap anf for this reason they must meet the criteria of daily use optimally.
|
|
| |
|
|
Applying SolidWorks Flow Simulation for cooling system of the power converter
Matoušek, Patrik ; Vetiška, Vojtěch (referee) ; Dostál, Lukáš (advisor)
Thesis deals with the issue of cooling power converters. It describes the disposition of power converter M50, produced by ELCOM, a.s., and the distribution and origin of heat losses in the converter. The thesis then describes the process of creating a 3D CAD model of the converter in Solidworks and the procedure for heat simulation of the converter in default state and with cooling fan failures using Solidworks Flow Simulation. The thesis then evaluates the results of these simulations, and on their basis it suggests possible improvements in the design of converter‘s cooling system. These improvements are then evaluated in further simulations. The thesis then describes the verification of performed simulations by comparison with a temperature-rise test.
|
|
|
Usage of Busbar as a Source of Heat
Svoboda, Ondřej ; Macháček, Jan (referee) ; Radil, Lukáš (advisor)
This study is dedicated to the use of heat energy from the busbar and its cooling system. The study deals with thermal analysis of the busbar, both using numerical simulations in SolidWorks and practical examination – warming of the busbar. We can verify the correctness of the simulation from the measured values. To determine the temperature profile of the busbar, it is necessary to measure the temperature at various points of the busbar by contact method using thermocouple or contactless method using a thermal imager. Measurements are performed at the busbar LIA1600 made by Siemens Busbar Trunking System Mohelnice. The aim of the study is to analyze temperature busbar, to suggest the most efficient method of heat recovery, and to make economic calculation
|
|
|
Design and Production of External Aquarium Filter Prototype
Svoboda, Richard ; Kolář, Ladislav (referee) ; Sedlák, Josef (advisor)
This Thesis is about the design and production of an external aquarium filter prototype. My prototype uses the method of the method Fused deposit modeling. The filter model was designed in a 3D parametric software Solidworks and printed by 3D-Printer uPrint. The thesis describes how the issue of waterproofing printed parts is solved, and also how the appropriate thread (diametr 90 mm) is chosen for printing.
|
|
|
Analysis of the influence of the gas flow in the placement of the sample in the chamber of the environmental scanning electron microscope
Bednář, Eduard ; Bílek, Michal (referee) ; Maxa, Jiří (advisor)
This thesis deals with the simulation of fluid dynamics in environmental scanning electron microscope and evaluate solvers setup, the degree of discretization, choice of turbulent model and proposal optimal design of environmental scanning electron microscope. The theoretical part describes the issue of environmental scanning electron microscopy, software SolidWorks and ANSYS Fluent, basic equations describing fluid status, fluid turbulence, the mean free path of molecules and electron scattering. The practical part of the thesis is to create the model of environmental scanning electron microscope AQUASEM II in CAD system SolidWorks and simulation of fluid flow in the sample chamber before aperture PLA1 by ANSYS Fluent. A series of simulations provided the perfect setting solver. These knowledge are used in the second stage of the practical part, where is proposed optimal shape of the table sample and the input aperture PLA1.
|
|
|
A new production technology of a rotational part
Sychra, Jiří ; Fiala, Zdeněk (referee) ; Píška, Miroslav (advisor)
This master’s thesis is focused on a new production technology of a rotational part. The SolidWorks software was used for create the component design. According to the proposed models, CNC program using parametric programming using mathematical functions was created in the CNC Syntax Editor Free Edition program. The final step was the experimental verification of the functionality and components compared with other type and the economical evaluation of manufactured components.
|
|
| |
|
|
Model of electric furnance for heat-resistant material processing
Franek, Lešek ; Malounek, Petr (referee) ; Dvořáček, Martin (advisor)
Content of the document is to create model of kiln, compare result with the real kiln. There is described 3D design in SolidWorks application, creation of a physical model in COMSOL Multiphysics and its export to Simulink. Subsequently is described the Simulink scheme, functions of program parts and visualization in B&R Automation Studio. The obtained results are compared with measured values. There is also described the design of a controller with a off-line identification.
|
guest ::
