|
|
Residential Building
Londa, Libor ; Žižka, Lukáš (referee) ; Sukopová, Dáša (advisor)
The thesis is focused on the preparation of documentation project of new residential building with twenty flats. The building is located in Valašské Meziříčí. The building has four floors, which are used for housing and one underground technical floor with garage and cellar booths. The building is brick ceramic blocks Porotherm and it is covered with a flat roof. The drawings were processed in a computer program AutoCAD.
|
|
|
Hotel in Přerov
Blaha, Jan ; Rozehnal, Miroslav (referee) ; Štěpánek, Ladislav (advisor)
The diploma thesis deals with a project documentation of hotel building in Přerov. The object is designed as a detached building with one basement and four floors. There is an underground garage and technical rooms of the hotel situated in the basement. In the first floor, there are entrance hall, administrative part, restaurant and its hinterland. Another ground floors are designed to accommodate guests. The structural system is reinforced concrete skeleton. The perimeter wall is building from clay bricks. The object is covered with two flat roofs.
|
|
|
Home with hospice care
Holohlavská, Lenka ; Burianová, Lenka (referee) ; Smolka, Radim (advisor)
The main goal of this diploma project is detailed design documentation of the House with hospic care, Litomyšl. The building consists of two upper ground floor levels. First ground floor is partially recessed into the terrain. The layout responds to the main purpose of the building - healthcare and social centre. Hospic is located on the edge of the city, it has the L-shaped form. The area with rooms for patients is distributed along the southern facade. The objective of connecting the interior and garden in the courtyard has been considered while forming the exterior finishing surfaces. The capacity of the hospice centre is 15 beds. The building structure is made of masonry walls with reinforced concrete slabs and combination of single sloped roof with flat roof.
|
|
|
Apartment house
Antoš, Jan ; Mikošek, Marek (referee) ; Hlavačka, Tomáš (advisor)
The master´s thesis "Apartment house" is in form of project documentation containing all appropriateness in accordance with valid regulations. The house is designed as a detached house and without a cellar. The house is rectangular dimension, with a flat vegetation roof. The house has four floors with loggias, balconies and terraces. The house has 10 housing units. On the first floor is the accessory apartments: bicycle room, technical room, cellar room and garage. In the house is projected a lift. The house is made of brick system with a contact insulated system. The part of thesis is a heat-technical opinion, calculations staircase and foundation construction.
|
|
|
Block of Flats
Habán, Petr ; Havířová, Zdeňka (referee) ; Lavický, Miloš (advisor)
The diploma thesis deals with new block of flat in Velké Meziříčí (Vysočina). The building is rectangular in shape with five floors and a flat roof. Block of flats contains 29 residential units has wheelchair access and a lift. Bearing and non-bearing walls are made of sand-lime blocks, ceiling structure consists of reinforced concrete hollow core slabs. The facade is made with an external thermal insulation composite system.
|
|
|
Wellness Sports-center with Accomodation
Brtníčková, Jitka ; Rychnovský, Václav (referee) ; Králová, Zuzana (advisor)
The new building of Sport and Relaxation Centre with the possibility of accommodation is situated on the vacant site in Blansko. Under the three storey building partialy runs basement. On the ground floor is located a restaurant with facilities, also rooms for sport and relaxation. On the second and the third floor is the centre’s accommodation with a total capacity of 38 persons. In the basement are mainly storerooms and utility rooms. The building is made of ceramic bricks. The ceiling construction is monolithic and the building has a flat roof. The building is constructed on footing foundations and strip foundations.
|
|
|
Electric drive of lift model with EC motor
Kutrucz, Tomáš ; Procházka, Petr (referee) ; Koláčný, Josef (advisor)
This diploma thesis describes a simulator of home elevator driven by an EC engine (external combustion engine). The introductory chapter of the thesis deals with the history of elevators. It also contains the description of EC engines, the description of the construction of the simulator and of the mechanical, electrical, and software adjustments carried out as based on the thesis. The main part of the work concentrates on the description of the changes of the drive algorithms, the production of the 3D simulator and the animation in the background of 3D Solid Works. Moreover, it also deals with the experimental performance measurement based on the loading of the stimulator drive.
|
|
|
Passenger lifts
Galásek, Martin ; Pokorný, Přemysl (referee) ; Škopán, Miroslav (advisor)
Bachelor thesis "Elevators for transportation of persons" is an overview of applied design solutions of the elevator engines, especially in terms of their efficiency, space and economy utilization in various types of buildings. The final part contains a summary of expected trends of elevators’ development with respect to new design elements, automation improvement, modernization and higher requests on safety during a conveyance of persons.
|
|
|
Design of lift positional table
Hájek, Ondřej ; Malášek, Jiří (referee) ; Pokorný, Přemysl (advisor)
This bachelor´s thesis describes the design of a lift positional table for overcome the height difference between the two roller tracks. Weight of the load is 550 kg and height difference of roller tracks is 2000 mm. The aim is to suggest the type of power lifting, power lifting functional calculation, functional calculation of the driver tray pallets and determining the main dimensions of the lifting table. The Appendix contains technical drawings of the lifting table and the table frame.
|
|
| |
guest ::
