|
Feedeng mixture bin
Frydrych, Martin ; Fišer, Karel (referee) ; Škopán, Miroslav (advisor)
This diploma thesis deals with proposal and construction of feeding mixture bin in two variants. The variant No. 1 has a capacity 53m3 with hopper angle 60° and the variant No. 2 has a capacity 45m3 with hopper angle 45°. The proposal of both variants of feeding mixture bin was worked out according to parameters of assignment and technical literature. Further it was made a calculation of wind load, snow load and a power reacting on bearing structure of bin in direction of thoroughfare. Technical documentation consists of configurations variant No. 1 and 2, chosen welding subassemblies and details of parts of variant No. 1 of feeding mixture bin.
|
|
Development of Atomic- and Ion Beam Sources
Šamořil, Tomáš ; Lencová, Bohumila (referee) ; Mach, Jindřich (advisor)
The objective of this master thesis was to provide the optimization of an ion-atom beam source for the improvement of its properties. The improvement of the parameters increases the efficiency of the source during the deposition of gallium nitride ultrathin films (GaN) being important in microeletronics and optoelectronics. After optimization, the depositions of GaN ultrathin films on Si(111) 7x7 at lower temperatures (
|
|
High loading shovel
Petro, Roman ; Lžičař, Roman (referee) ; Škopán, Miroslav (advisor)
This diploma thesis solves construction project high dumping shovel for back hoe loader New Holland B100 and B110. There are described operating conditions in the introduction, transport material and technical parameters for back hoe loader B100, B110. There are mentioned possible construction’s solutions and own design. Follow the kinematics analysis of material’s dumping and the static analysis on shovel and frame. This is connected with following peg’s control and the solidity analysis of shovel and frame for different load cases, where the MFE was used
|
|
The effect of gait training with a prosthesis on stability and parameters in patients with thigh amputation
Tučková, Tereza ; Smékal, David (advisor) ; Kálal, Jan (referee)
Diploma thesis "Effect of gait school with prosthesis on stability and walking parameters of patients after transfemoral amputation deals with problems of patients after transfemoral amputation due to vascular etiology. It mentions elementary knowledge of rehabilitation after amputation of lower extremity. Furthermore, there are described main complications that amputation brings into the patient ́s life: pain associated with amputation, skin complications and psychological hardships. Emphasis is laid on gait and gait practice for patients with amputation. I further deal with deviations commonly observed on gait of these patients and with factors influencing the gait, including the influence of particular parts of the prosthesis on patients ́ gait. The practical part is dedicated to comparison of two different approaches to gait practice. The effect of these approaches is evaluated on the basis of results of two groups of patients. The results were gathered by examination on force plate, measurement of gait velocity, examination of gait cadence and evaluation of patients ́s gait videos. Furthermore, I use functional tests: LCI - 5, ABIS - R, ABC scale and PEQ. All of these examinations were performed at the beginning and in the end of patients ́ stay at the Clinic of rehabilitation in Hradec Králové. The...
|
|
Network load generators
Kubík, Pavel ; Koutný, Martin (referee) ; Pelka, Tomáš (advisor)
The aim is to create, test and describe the network load generator for server-client connection type. It´s used language C++ under Linux. It was also used socket and multithreading programming. Load on the server is done by sending HTTP requests. The load generator have different adjustable parameters and displays the test statistics. In this work is described mechanisms wich are used, by the application, to load. Testing was done on one server with a different size of the target file.
|
|
Assemblying effect on cable lines quality
Dočkal, Martin ; Křepelka, Václav (referee) ; Filka, Miloslav (advisor)
In the first part is explained what actually a structured cabling is. Its beginning, from what and why it was created. Its history when at the beginning were applied unbalanced coaxial cables, those were later replaced by balanced cables. In cabling for TVs are still used coaxial cables. Balanced cables are according to type named UTP, STP, FTP, and so on. Whit growing popularity of this type of cabling and its wide spread application was necessary to set some rules, standards, specifications and demands, how to build up the cabling from project to realization. According to these rules is the system built so there are strict rules for length of subsystems and interfaces and the whole appearance of the structure cabling. Next important point is projecting of cabling that is related to the previous points and when it’s finished, we should strictly follow it. With the project is closely connected characteristic of this cabling as attenuations, cross-talks and other transmission parameters which are measured in the practical part. In the second part is spoken about all the parts of which the structured cabling consists - metallic and optical connecting elements and cables. There are also mentioned their mechanical, electrical and transmission features. In the third part is described influence of man on the quality of structured cabling and the most common causes of lower quality and the ways how to prevent this from happening and how to manipulate with cabling not to destroy it. The final (fourth) part considers the measurement. There are measured qualities of metallic wires as the attenuations, delay, cross-talks on the near- and far-end, impedance and resistance. To all the features are mentioned schemes of the measurement on the twisted pairs. The measurement is divided into two parts. In the first part are measured five types of balanced cables of different length, category and damage influencing quality of these cables. In the second part is measured one balanced cable if it’s corresponding with category 5 for that t was made and if it would be possible to use it also for higher category 6. Values are tabularly sorted in tables.
|
|
Posibilities of taking the number of children raised into consideration in the pension system construction
Veselý, Václav ; Fiala, Tomáš (advisor) ; Pechholdová, Markéta (referee)
The subject of diploma thesis is the pension system in the Czech Republic. We warn about the deficit increase in the future and suggest taking the number of children raised into consideration in the pension system construction. Pension system in the Czech Republic is described in detail. The first "pay-as-you-go" pillar represents the main part of the system. It could bring financial problems (if the retirement pension and pension income tax will stay at the same level as now) considering the expected trends in demography. Population projection was calculated using cohort component method (including migration). The threshold for the projection is year 2011, projection is calculated with 100-year horizon. There were also calculated revenues and expenses of the pension system for each projected year. If the expected parameters of the projection will be realized, the deficit of pension system in the hundred year period will reach 9.5 billion Kč (prices 2011). It represents the deficit 95.3 milliard Kč each year in the average. To reduce the deficit it is possible to increase the pension tax paid by productive people. But it could also bring the decline of fertility, because lower income could make people decide to reduce number of children. It would deepen the problems in the pay-as-you-go system. The financial problem of pension system could be solved by taking the number of children raised into consideration of the pension system construction. It would eliminate the situation that it is economically more favourable to be childless during the life. It could also bring the fertility increase. In the diploma thesis the value of the deficit is simulated for the various parameters of pension system and for the various demographic development in the future.
|
|
Computational analysis of working roll surface layers in hot rolling
Luks, Tomáš ; Hajduk,, Daniel (referee) ; Pohanka, Michal (advisor)
This thesis is dealing with an analysis of thermal and mechanical loads on a work-roll. First, hot rolling focused on work-roll is described in general. A theoretical analysis of roll loads and the mechanisms affecting roll durability are presented here. The thesis is concentrated on creation of a model in FEM program ANSYS. The final model is loaded with different rolling schemes and monitored stresses in a surface layer. The parameters obtained from the measurements performed in a rolling mill are applied as boundary conditions within the model.
|
| |
|
The effect of pyrethroid based pesticides on fish
RICHTEROVÁ, Zuzana
Pyrethroids are ones of the most used pesticides worldwides. The widespread use and high stability of pyrethroids lead to the assumption of that their occurrence in the environment could be quite frequent. They can reach water ecosystem as pollutants. Residues of pyrethroids are not only detected in the water column, but also in sediments and in fish tissues. The first study was devoted to the product Nexide containing 60 g.l-1 of active substance gamma-cyhalothrin. Tested Nexide concentrations were 5, 25, 50, 100, and 250 µg.l-1. Early life stage test was used.Common carp (Cyprinus carpio) was tested. There were significant mortalities in all concentrations except the lowest concentration during the trial. The lowest concentration tested 5 µg.l-1 only caused a slightly increased mortality. This lowest concentration influenced the growth in length and weight negatively, decelerated ontogenetic development, and made the body surface of the individuals darker. Histopathology of individuals from this concentration revealed dystrophy in liver. Examination of kidney, intestine and gills did not show significant histopathological differences compared with control. The evaluation of selected parameters of oxidative stress demonstrated a significantly higher activity of detoxification enzyme glutathione-S.transferase (GST) and a significantly lower activity of defensive enzyme glutathione peroxidase (GPx) compared with the control group. The other examined parameters of oxidative stress such as catalase (CAT), glutation reductase (GR), and lipid peroxidation determined by using the thiobarbituric acid-reactive substances (TBARs) were comparable to the control group. Changes in oxidative stress parameters suggest that exposure of the organism to the product Nexide in the given concentration leads to dysbalance of defensive enzymes. The second study was devoted to the product Cyperkill 25 EC containing 250 g.l-1. Tested Cyperkill 25 EC concentrations were 7.2, 36, 72, 144, and 360 µg.l-1. The procedure of the trial was the same as the preceded one. There were 100% mortalities in all concentrations except the lowest concentration during the trial. The lowest tested concentration 7.2 µg.l-1 allowed 90% of individuals to stay alive till the end of experiment. The lowest concentration influenced the growth in length and weight negatively and decelerated ontogenetic development compared with the control. Any individual exposed to this concentration did not reach juvenile stage until the end of the trial. Dark pigmentation was visible in 68% of these exposed individuals on the last day. Similar darkening was visible in individuals from higher concentrations shortly before death too. Histological examination did not revealed significant changes in intestine, liver, kidney, and gills compared with the control group. Evaluation of selected parameters of oxidative stress demonstrated significantly lower activities of GST, GR, and GPx. Activities of CAT and TBARS were comparable with the control group. Changes in oxidative stress parameters suggest that exposure of the organism to the product Cyperkill 25 EC in the given concentration could induce oxidative stress and interfere with the activities of antioxidant enzymes. The presented thesis summarises actual data about pyrethroids and their influence on fish. The demonstrated effects confirm high susceptibility of early developmental stages of fish to tested pesticides. When interpreting the results, we have to take into account the fact that studies showed this risk even on single pyrethroid substances. But water organisms are exposed to many other more or less toxic products and substances in a real environment. These xenobiotics could react with each other and their mixture could even potentiate negative effects. The performed studies also clearly show the significant differences in the sensitivity of embryonic and embryolarval tests.
|
guest ::
