| |
|
Optimization of Manufacturing and Assembling Technology of the Valve Bolt
Hrouzková, Andrea ; Zapletal, Josef (referee) ; Doležal, Pavel (advisor)
The thesis aimed to study the impact of manufacturing and assembly technology, the valve bolt fitted to diesel high pressure pump CP3 in the Bosch, which has been found to leak. As experimental material was chosen heat treated bolts M16x1,5 made of material 12 050th. Groups of samples were produced in two ranges hardness. Experimental determination of the optimum range of hardness was assessed on the basis of the results of the process of the screw and set the value of plastic deformation of the sealing surfaces of the parts. Experimental section also deals with the analysis of bearing surfaces on the pump and the components, after the screw process. To some extent, is observed as surface treatment
|
|
Multipilot Airliner's Crew
Munk, Tomáš ; Matyáš, Petr (referee) ; Šošovička, Róbert (advisor)
The aim of this master„s thesis is detailed study of multipilot airliner?s crew in sence of optimalization of its actions, which is known as Crew Resource Management (CRM). This paper shows what is the main purpose of CRM through the air crash investigations and human factor analysis. According to this findings, the last chapter presents problems of flight crew planning and personnel selection.
|
|
Optimization of internal material flow
Kovář, Miroslav ; Veverka, Petr (referee) ; Simeonov, Simeon (advisor)
This thesis refers about the optimalization of internal business logistics system. This thesis want to explore and propose new solutions to the system of internal transport of material in a manufacturing company. The aim is find a suitable methodology for the problem and aplication this methodology to the particular case. The practical part describes the specific case of the production system in the Bosch Diesel s.r.o. at his plant in Jihlava. Description includes an overview of the current state of the logistical arrangements and problems that a rise from the current state. Compares the current state with the proposed state and investigates the various pros and cons. Part of the analysis is a computer simulation of the transport system, which has been support to confirming the appropriateness of the proposed solutions.
|
|
Con Rod design and optimization of racing engine
Ulman, Jaroslav ; Zháňal, Lubor (referee) ; Beran, Martin (advisor)
This master thesis describes the design and optimization of connecting rod motor racing car. At the beginning of the whole work is a 3D-model of rods, from which then the whole work is based. Then it analyzes the current model of stress and on the basis of the results are made structural changes to the solution of rods. Newly adapted connecting rod is again analyzed using FEM and newly obtained results are compared with results of the original model of connecting rods. The conclusion deals with sensitivity analysis of selected parameters of rods and their potential effect on the resulting changes in strength connecting rod .Then is an assessment of all results.
|
|
Design of limited slip differential of racing engine
Kresta, Vojtěch ; Vančura, Jan (referee) ; Beran, Martin (advisor)
The thesis concentrates on the design of limited slip differential of the racing car. It describes the method of designing the model of space for differential, using the 3D ATOS scanner and Pro/ENGINEER software environment. The next part of the thesis illustrates the process of designing the model of mass-produced open differential. The main attention is paid to the design of both versions of clutch limited slip differential and also to the analysis of problematic issues of each analyzed component. Further on, there is a stress analysis of some selected parts: pressure ring, differential case and their comparison before and after their optimization.
|
|
Analysis of process for production of small plates
Talanda, Jiří ; Fiala, Alois (referee) ; Koška, Petr (advisor)
Theme of the Master’s thesis is analysis of process for production of small plates. Main parts of the thesis are analysis of the production process, process mapping, data capture, analysis of the data by Pareto analysis and find causes of nonconformities. Causes analysis is based on data analysis and process observation. It is divided to chapters by factors which are influencing the process. Optimization measures are designed with regard to their simplicity of realization and system in organization.
|
|
SEO audit and content analysis of the selected website
Beneš, Martin ; Bubeníček, Jan (advisor) ; Truhlář, Filip (referee)
This bachelor thesis deals with SEO audit and content analysis for a particular website. The aim is to outline the process of search engine optimization and then verify if the website is sufficiently optimized on the basis of the information gathered. The theoretical part is defined by basic problems, the most commonly used methods of optimization and link-building, and outlined the process of creating keyword analysis. Then there is a brief explanation about how search engines work and which factors are crucial for evaluating the positions of web pages in a search. At the end it describes the necessary tools for a quality SEO audit. In the practical part, there will be an executed SEO audit on the basis of theoretical knowledge along with content analysis, which will be based on the keyword analysis. Part of SEO audit will be specific recommendations for increasing traffic from organic search.
|
|
Comparison of quantitative LIBS analysis of steel standards utilizing single-pulse and double-pulse LIBS
Pořízka, Pavel ; Hrdlička, Aleš (referee) ; Kaiser, Jozef (advisor)
In this diploma thesis the differences between single pulse and double pulse laser induced breakdown spectroscopy (LIBS) methods are discussed. The time evolution of laser induced plasma (LIP) parameters, such electron density, plasma temperature, density of ions and atoms is shown. Selected methods for evaluation of plasma parameters (Boltzmann equation, Saha-Boltzmann equation etc.) are also stated. The theoretical bases of local thermodynamic equilibrium (LTE), which is necessary condition for using of previously stated methods for computation of plasma parameters, are discussed. Diploma thesis also contains the description of each component of our LIBS experimental set up and the way of their optimization. Presented theoretical advantages of DP LIBS method are demonstrated on results of experimental measurements of steel standards.
|
|
Fossil fuels substitution in large combustion plant
Hájek, Zdeněk ; Popela, Pavel (referee) ; Touš, Michal (advisor)
The thesis aims at current issues of using renewable resources here in the Czech Republic, mainly on biomass co-firing with fossil fuels in large combustion plant. The introduction provides an overview of systems for biomass co-firing. Further the using of optimization for solution problem of integration biomass fuels into existing large combustion plants and planning its operation conditions is presented. The main point of this thesis lies in creating of a user interface for modeling and optimization tool. Its functionality will be proved by solving a case study involving the analysis of possibilities for replacing fossil fuels due to the limited availability of coal in the market.
|
guest ::
