|
Exchange rate policy of People's Bank of China under pressure of yuan internationalization
Randl, Tomáš ; Hnát, Pavel (advisor) ; Jedlinský, Jakub (referee)
Chinese economy has reached its export limits and is located in an era of transformation process into new economic model based on domestic consumption and sector of services. Under pressure from foreign entities which require internationalization of yuan as an implementation of free floating exhange rate regime, China must deal with number of problems arising from the process of economic transformation. This thesis examines possible solutions to current problems from the perspective of exchange rate policy of the People's Bank of China.
|
|
The capacity of the European Union to form a common foreign policy: The approach towards Russia during the crisis in Ukraine
Grycová, Adéla ; Rolenc, Jan Martin (advisor) ; Cibulková, Petra (referee)
The thesis deals with the issues of framing and europeanization of the foreign policy of the European Union in the context of an actorness of the EU. These two theoretical concepts are applied on the case of an approach of the Czech Republic and European Union towards Russian Federation during the crisis in Ukraine. The aim of this thesis is to find out if the European Union is capabble of affecting the behaviour of a member state in order to create unified and operational foreign policy. The first chapter deals with teoretical definition of the two concepts and detailed description of the stances of Czech Republic and European Union follows in the second one. On the basis of these chapters the assessment is conducted. The last part firstly concludes if any attempt of influecing is present and secondly the success rate of the attempt is evaluated.
|
|
Application of Monte Carlo simulations in banking
Boruta, Matěj ; Teplý, Petr (advisor) ; Fučík, Vojtěch (referee)
Currently, banking is exposed to huge market risks. One of those risks is occurrence of negative interest rates in the EU. Nowadays, it is important to use sophisticated and modern measurement tools and approaches to measure and manage banking risks. One of those methods is Monte Carlo simulation. This bachelor thesis is aimed at analysis and prediction of 3-month maturity Prague Interest Offer Rate (PRIBOR) for 3, 6 and 12 months with using Monte Carlo simulations. It was found that this method is suitable for prediction market variables with low volatility. If anybody uses this method, it is necessity to have in mind all pitfalls and assumptions, that this method includes, as an adequate random generated number of scenarios, approximation of correct probability distribution, independence of dataset and not least, as far as possible, to focus on factors generating randomness of market variable and not the prices, that express rather consequences of randomness than its cause. Further, the Monte Carlo prediction was compared with prognosis of the Czech Nation Bank and it was found that Monte Carlo prediction is more accurate for short term predictions. 12-month prediction of Monte Carlo simulation discovered also possible occurrence of negative interest rate at 0,05% level of probability in compare to the Czech National Bank prognosis, where was no negative interest rate predicted.
|
|
The tax system reduces motivation to return to work among mothers with young children: recommendations and evaluation
Šatava, Jiří
In the Czech Republic, the overall taxation of work, i.e individuals' income tax together with social security and health insurance contributions, places a heavy burden even on the relatively low earnings of so-called second earners in households, i.e. partners with lower earnings. These peoples' work activity is, however, generally very sensitive to the level of taxation. A large group of these earners is made up of mothers with young children. Mothers who are the second earner in their household are subject to a participation tax rate (PTR) up to 30 % higher than their partners, and yet a higher PTR results in lower motivation to work. Women with children and low earning potential are subjected to the highest PTRs in comparison with their partners.
|
|
Global Economy Outlook - November 2016
Česká národní banka
The November issue of Global Economic Outlook presents the regular monthly overview of recent and expected developments in selected territories, focusing on key economic variables: inflation, GDP growth, leading indicators, interest rates, exchange rates and commodity prices. In this issue, we also focus on the relationship between the Brent crude oil price and the US dollar exchange rate over the last ten years. The results show that the inverse relationship between the Brent price and the nominal effective exchange rate of the dollar still applies, helping dampen fluctuations in the dollar price of oil in “non-dollar” economies.
Fulltext:  PDF; PDF
|
|
Global Economy Outlook - October 2016
Česká národní banka
The October issue of Global Economic Outlook presents the regular monthly overview of recent and expected developments in selected territories, focusing on key economic variables: inflation, GDP growth, leading indicators, interest rates, exchange rates and commodity prices. In this issue, we focus in detail on the industrial producer price index (PPI), which, alongside the consumer price index (CPI), is a key indicator of inflation on the production side of the economy. We also explain the specifics of the PPI, especially in the EU, and present a model simulation indicating the sensitivity of the PPI to a change in oil prices.
Fulltext: PDF; PDF
|
|
Technical Analysis in Foreign Exchange
Hurdálek, Michal ; Procházka, Petr (advisor)
The bachelor thesis deals with trading in the forex market. The theoretical part describes the Forex market, its history, when it traded, what is traded, which entities are involved in the market and selected basic concepts, that you must know in this market. There are also basic procedures and rules as the speculative individual should behave on the market in different situations and how to distribute the funds, to avoid a large percentage losses of the capital, as the foundation of financial literacy should think about knowledge. At the conclusion of the practical part, there is the technical analysis, that justifies and predicts the future development of exchange rates. Technical analysis is followed by a practical part, which describes the transactions, that were carried out under real conditions on the currency pair EUR / USD. These transactions were carried out using two technical indicators, Moving averages and Bollinger bands. At the conclusion of the work, there is the evaluation of these two indicators, which one was more profitable for us.
|
|
Arctic tundra dendrochronology
Lehejček, Jiří ; Svoboda, Miroslav (advisor) ; Monika, Monika (referee)
Historically unprecedented environmental change in the Arctic ecosystems is often given into the context of its past and possible future development. In the region where instrumental meteorological observations are scarce archives need to be investigated in order to address this issues. The comprehensive synthesis one of the archives: long-live circumpolar evergreen Juniperus communis L. shrub is presented here. 20 individuals from southwest Greenland were investigated at the cell anatomy level to understand the ecology of the species and unhide its potential for environmental and climate reconstructions. The findings are as follows:
i) Stop of exponential cross-sectional conduit-lumen widening with increasing age is in contrast with conduit-lumen nature of trees. This indicates that shrubs do not need to saturate their water and nutrient demands via traits of classical hydraulic conductivity law but rather developed different mechanisms. Extreme weather conditions result in prostrate growth form. However, different weather factors probably influence shrub growth differently: While snow and wind act mechanically (a), temperature influences the form of growth physiologically (b). a) So long as the young shrub stem has high resilience to bend back to an upright position after snow melt and so long as it can withstand the wind during the vegetation season it most likely grows upright and the conduit-lumens widen. b) Temperature, resp. freeze-thaw events are responsible for the shrubs preference of safety (finite size of conduit-lumens) over hydraulic efficiency, thus not allowing for more primary growth. All of these (and other) factors are apparently working together and the transition of vertical to more horizontal growth is gradual. As a consequence, the conduit-lumen sizes may not have to be further increased (due to ecophysiological restrictions possibly also must not) because water is no longer transported against gravity.
ii) Observed age/growth trend has to be taken into consideration for further employment of the wood anatomical parameter in paleoenvironmental studies. That is, shrub cell parameters can only be used for this purposes if correctly detrended. This allows for more accurate as well as longer reconstructions because youth trend was often neglected in reconstructions based on shrub annual-rings.
iii) The south-western Greenland Ice-Sheet (GrIS) melt rates reconstruction is presented for the whole 20th century. This part of GrIS is considered as the most active. According to the presented reconstruction current GrIS melt rates are not uncommon for the last century being comparable to first decades of 20th century. This finding is particularly important contribution to the debate on Atlantic meridional overturning circulation (AMOC). Too high fresh water inputs into the Northern Atlantic from GrIS melting may slow down or even stop the AMOC which would result in more continental climate in Europe. Presented results indicate that this threshold lies higher than observed current melt rates of GrIS.
Fascinating Juniperus comunnis species has shown to be able to address many ecological as well as environmental open questions and due to its longevity and abundant distribution has a great potential to become an important player in the Arctic research.
|
|
Partial Report IV / 2016 - Rating of the deformation stress monitoring the state of the rock mass during mining coal seam 30 (634) within the trial operation of mining method corridor - a pillar in OPJ ČSM - NORTH
Waclawik, Petr ; Ptáček, Jiří ; Kukutsch, Radovan ; Kajzar, Vlastimil ; Koníček, Petr ; Souček, Kamil ; Staš, Lubomír
Monitoring of the deformation stress state of the rock mass is a prerequisite for the verification of unapproved new mining methods hall-pillar and its further application in the Czech part of the Upper Silesian coal basin. This mining method is designed on the basis of experiences and practices that are verified in different natural conditions and depths below the surface and is therefore essential for the verification of conditions for the Czech part of the Upper Silesian Basin based on geotechnical monitoring. The present report is prepared on the basis of a contract no. 942/50/10, where the Institute of Geonics, v.v agrees to make periodic evaluation of monitoring data napěťodeformačního state of the rock mass. In accordance with the aforementioned agreement, the message is processed in the six-month period and continues in the interim report III / 2015 (Waclawik et al. 2015) passed buyers in April this year. Interim results of the geotechnical monitoring, such as the experience gained during the first conquest dobývky V show specifics of natural conditions in trial operation unapproved new mining methods hall-pillar.
Fulltext: content.csg - PDF
Plný tet: UGN_0464907 - PDF
|
|
New Methods for Increasing Efficiency and Speed of Functional Verification
Zachariášová, Marcela ; Dohnal, Jan (referee) ; Steininger, Andreas (referee) ; Kotásek, Zdeněk (advisor)
Při vývoji současných číslicových systémů, např. vestavěných systému a počítačového hardware, je nutné hledat postupy, jak zvýšit jejich spolehlivost. Jednou z možností je zvyšování efektivity a rychlosti verifikačních procesů, které se provádějí v raných fázích návrhu. V této dizertační práci se pozornost věnuje verifikačnímu přístupu s názvem funkční verifikace. Je identifikováno několik výzev a problému týkajících se efektivity a rychlosti funkční verifikace a ty jsou následně řešeny v cílech dizertační práce. První cíl se zaměřuje na redukci simulačního času v průběhu verifikace komplexních systémů. Důvodem je, že simulace inherentně paralelního hardwarového systému trvá velmi dlouho v porovnání s během v skutečném hardware. Je proto navrhnuta optimalizační technika, která umisťuje verifikovaný systém do FPGA akcelerátoru, zatím co část verifikačního prostředí stále běží v simulaci. Tímto přemístěním je možné výrazně zredukovat simulační režii. Druhý cíl se zabývá ručně připravovanými verifikačními prostředími, která představují výrazné omezení ve verifikační produktivitě. Tato režie však není nutná, protože většina verifikačních prostředí má velice podobnou strukturu, jelikož využívají komponenty standardních verifikačních metodik. Tyto komponenty se jen upravují s ohledem na verifikovaný systém. Proto druhá optimalizační technika analyzuje popis systému na vyšší úrovni abstrakce a automatizuje tvorbu verifikačních prostředí tím, že je automaticky generuje z tohoto vysoko-úrovňového popisu. Třetí cíl zkoumá, jak je možné docílit úplnost verifikace pomocí inteligentní automatizace. Úplnost verifikace se typicky měří pomocí různých metrik pokrytí a verifikace je ukončena, když je dosažena právě vysoká úroveň pokrytí. Proto je navržena třetí optimalizační technika, která řídí generování vstupů pro verifikovaný systém tak, aby tyto vstupy aktivovali současně co nejvíc bodů pokrytí a aby byla rychlost konvergence k maximálnímu pokrytí co nejvyšší. Jako hlavní optimalizační prostředek se používá genetický algoritmus, který je přizpůsoben pro funkční verifikaci a jeho parametry jsou vyladěny pro tuto doménu. Běží na pozadí verifikačního procesu, analyzuje dosažené pokrytí a na základě toho dynamicky upravuje omezující podmínky pro generátor vstupů. Tyto podmínky jsou reprezentovány pravděpodobnostmi, které určují výběr vhodných hodnot ze vstupní domény. Čtvrtý cíl diskutuje, zda je možné znovu použít vstupy z funkční verifikace pro účely regresního testování a optimalizovat je tak, aby byla rychlost testování co nejvyšší. Ve funkční verifikaci je totiž běžné, že vstupy jsou značně redundantní, jelikož jsou produkovány generátorem. Pro regresní testy ale tato redundance není potřebná a proto může být eliminována. Zároveň je ale nutné dbát na to, aby úroveň pokrytí dosáhnutá optimalizovanou sadou byla stejná, jako u té původní. Čtvrtá optimalizační technika toto reflektuje a opět používá genetický algoritmus jako optimalizační prostředek. Tentokrát ale není integrován do procesu verifikace, ale je použit až po její ukončení. Velmi rychle odstraňuje redundanci z původní sady vstupů a výsledná doba simulace je tak značně optimalizována.
|
guest ::
