|
Motivation and evaluation of empolyees
Sinkulová, Anna ; Legnerová, Kateřina (advisor) ; Šmíd, David (referee)
My bachelor thesis is focused on motivation and assessment of employees in the company. The aim of this thesis is to investigate the influence of team building and benefits on employees' motivation. Literature based theoretical part of my thesis describes and investigates the real meaning and purpose of motivation and basic motivational concepts. Furthermore, I outlined the basics behind employee benefits, team building and also stated the current given trends in these areas. The practical part is focused on benefit and workplace research and their impact on the general motivation to work and the relations between the employees of the Czechoslovak Commercial Bank (ČSOB). In order to collect the best results, I used the method of questionnaires. Respondents were asked to answer questions considering their satisfaction with the system of employee benefits and the importance of teamwork. Based on the survey results I propose certain changes that should lead to motivation improvement and better job performance.
|
|
Improving logistics operations in the warehouse of Stroj Servis Plus
Feklistov, Maxim ; Vinš, Marek (advisor) ; Mervart, Michal (referee)
This bachelor thesis is focusing on the logistic operations in the warehouse of a particular organization. The objective of the thesis is to analyze logistics operations in the warehouse of Stroj Servis Plus and propose certain measures, based on selected methods, which might lead to improvement in the efficiency of the current logistics operations. This bachelor thesis is divided into two parts. In first part, theoretical part, is describing the basic theoretical concepts and principles, connected with the main field of the interest. The second part, practical part, begins with the introduction of the company Stroj Servis Plus and analyzing of the logistics operations in the warehouse. Based on the facts, discovered in the intercompany documents, own practice in the firm and theoretical knowledge propose solutions that would eliminate any disadvantages and improve logistics operations in warehouse of the selected company.
|
|
Výběr a implementace open source nástroje pro řízení portfolia projektů
Marek, Jan ; Chlapek, Dušan (advisor) ; Kučera, Jan (referee)
Methods and ways of implementation of changes and innovations in companies through project management are in today's society very well established. There exists methodologies, techniques and tools for the management of individual projects. However in a role of project manager, I very often faced the fact that companies are performing the project portfolio management in very intuitive way. This in itself leads to failed and prematurely terminated projects, initiation of the wrong projects or realisation of correct projects, but at the wrong time. Very often I have also recognized, that there is lack of awareness of fact, that there are also Open Source applications that can help with the organization's portfolio. This thesis deals with the definition of requirements, search and selection of proper OSS application and subsequent implementation. In the first part of this thesis I prepare a theoretical framework about PPM, and on that basis then identify and verify a set of requirements for selection of right OSS PPM application. The next section of thesis describes searching for suitable applications from a variety of sources, assessment against the requirements and the final selection. In the last part the implementation project is drafted, which aims to serve other colleagues in project management as one of the possible implementation paths. The outputs are then continuously confronted with experts in matter of projects and project management in the field of IT in order to maximize symbiosis between theory and real life experiences. Virtually every project management methodology defines the collection of already-proven techniques, best practices or lessons learned from the previous similar implementations. The main contribution of this thesis I see in fact that it contains not only the design of the project implementation, but also describes a logical path, what leads to the result. Therefore this thesis could be used as a base or discussed best practice, when a project of implementation of PPM application in place.
|
|
ELECTRON BEAM REMELTING OF PLASMA SPRAYED ALUMINA COATINGS
Matějíček, Jiří ; Veverka, J. ; Čížek, J. ; Kouřil, J.
Plasma sprayed alumina coatings find numerous applications in various fields, where they enhance the properties of the base material. Examples include thermal barriers, wear resistance, electrical insulation, and diffusion and corrosion barriers. A typical structure of plasma sprayed coatings, containing a multitude of voids and imperfectly bonded interfaces, gives them unique properties - particularly low thermal conductivity, high strain tolerance, etc. However, for certain applications such as permeation barriers or wear resistance, these voids may be detrimental.\nThis paper reports on the first experiments with remelting of plasma sprayed alumina coatings by electron beam technology, with the purpose of densifying the coatings and thereby eliminating the voids. Throughout the study, several parameters of the e-beam device were varied - beam current, traverse velocity and number of passes. The treated coatings were observed by light and electron microscopy and the thickness, structure and surface morphology of the remelted layer were determined and correlated with the process parameters. Based on the first series of experiments, the e-beam settings leading to dense and smooth remelted layer of sufficient thickness were obtained. In this layer, a change of phase composition and a marked increase in hardness were observed.\n
|
|
Modelling, parameter estimation, optimisation and control of transport and reaction processes in bioreactors.
ŠTUMBAUER, Václav
With the significant potential of microalgae as a major biofuel source of the future, a considerable scientific attention is attracted towards the field of biotechnology and bioprocess engineering. Nevertheless the current photobioreactor (PBR) design methods are still too empirical. With this work I would like to promote the idea of designing a production system, such as a PBR, completely \emph{in silico}, thus allowing for the in silico optimization and optimal control determination. The thesis deals with the PBR modeling and simulation. It addresses two crucial issues in the current state-of-the-art PBR modeling. The first issue relevant to the deficiency of the currently available models - the incorrect or insufficient treatment of either the transport process modeling, the reaction modeling or the coupling between these two models. A correct treatment of both the transport and the reaction phenomena is proposed in the thesis - in the form of a unified modeling framework consisting of three interconnected parts - (i) the state system, (ii) the fluid-dynamic model and (iii) optimal control determination. The proposed model structure allows prediction of the PBR performance with respect to the modelled PBR size, geometry, operating conditions or a particular microalgae strain. The proposed unified modeling approach is applied to the case of the Couette-Taylor photobioreactor (CTBR) where it is used for the optimal control solution. The PBR represents a complex multiscale problem and especially in the case of the production scale systems, the associated computational costs are paramount. This is the second crucial issue addressed in the thesis. With respect to the computational complexity, the fluid dynamics simulation is the most costly part of the PBR simulation. To model the fluid flow with the classical CFD (Computational Fluid Dynamics) methods inside a production scale PBR leads to an enormous grid size. This usually requires a parallel implementation of the solver but in the parallelization of the classical methods lies another relevant issue - that of the amount of data the individual nodes must interchange with each other. The thesis addresses the performance relevant issues by proposing and evaluation alternative approaches to the fluid flow simulation. These approaches are more suitable to the parallel implementation than the classical methods because of their rather local character in comparison to the classical methods - namely the Lattice Boltzmann Method (LBM) for fluid flow, which is the primary focus of the thesis in this regard and alternatively also the discrete random walk based method (DRW). As the outcome of the thesis I have developed and validated a new Lagrangian general modeling approach to the transport and reaction processes in PBR - a framework based on the Lattice Boltzmann method (LBM) and the model of the Photosynthetic Factory (PSF) that models correctly the transport and reaction processes and their coupling. Further I have implemented a software prototype based on the proposed modeling approach and validated this prototype on the case of the Coutte-Taylor PBR. I have also demonstrated that the modeling approach has a significant potential from the computational costs point of view by implementing and validating the software prototype on the parallel architecture of CUDA (Compute Unified Device Architecture). The current parallel implementation is approximately 20 times faster than the unparallized one and decreases thus significantly the iteration cycle of the PBR design process.
|
|
Miřenka Čechová
Janečková, Kateřina ; PETIŠKOVÁ, Ladislava (advisor) ; SOPROVÁ, Jana (referee)
Monographic work focuses on artistic creation Miřenka Čechová, one of the
the leading personalities of our contemporary stagecraft. Her personal and
artistic development started when she began studying dance and continued to
mimic and physical theater. Material presents her contribution to
contemporary Czech scene physical theater and refers to her international
success. Work observes her role like co-founder of physical theaters Theatro
Pantomissimo and Spitfire Company and to presents the work of these
physical theaters and reveals the working and teaching methods in the
preparation of copyright performances.
|
|
Global Economy Outlook - November 2016
Česká národní banka
The November issue of Global Economic Outlook presents the regular monthly overview of recent and expected developments in selected territories, focusing on key economic variables: inflation, GDP growth, leading indicators, interest rates, exchange rates and commodity prices. In this issue, we also focus on the relationship between the Brent crude oil price and the US dollar exchange rate over the last ten years. The results show that the inverse relationship between the Brent price and the nominal effective exchange rate of the dollar still applies, helping dampen fluctuations in the dollar price of oil in “non-dollar” economies.
Fulltext:  PDF; PDF
|
|
Interpretive principles in Verdi's operas
Beneš, Andrej ; HAJÓSSYOVÁ, Magdaléna (advisor) ; VOTAVOVÁ, Yvona (referee)
The master’s thesis deals with the theme creation of the opera production of Giuseppe Verdi with the focus on his opera Falstaff and deals with significant important interpretations of this opera. This dissertation is supposed to bring a complete picture of Verdi’s opera production pointing out some details which are not commonly known nor from the public nor in the professional music world. What appears in this work is Verdi’s correspondence (letters). I consider these letters an authentic source to understand Verdi’s creative and artistic intentions. Hereafter I portray an idea of how to perceive opera Falstaff not only from my point of view but I used the lead from the Italian reviews and musicology.
|
|
FAUST AND JOB´S
Slezáková, Kateřina ; ULLRICHOVÁ, Daria (advisor) ; SÍLOVÁ, Zuzana (referee)
This thesis examins the nature of Faust’s inner ambivalence in the context of modern times. It tries to identify the basic traits leading to the feeling of emptiness. The authoress uses comparing the dramatic character of Faust with his biblical prototype of Job and one of the most successful entrepreneurs today Steve Jobs. Based on the comparison she contemplates the validity or mutation of the drawing theses nowadays. In the second part the authoress reflects the production of the project of Faust. Due to her specialization in the field of dramaturgy she pursues especially the process of the selection of particular dramatic situations, adjustments of dramatic text and the choice of suitable staging means.
|
|
Fluidized-bed Combustion of Dry Stabilized Sewage Sludge in Oxy-fuel Mode
Moško, Jaroslav ; Pohořelý, Michael ; Durda, Tomáš ; Zach, Boleslav ; Šyc, Michal ; Svoboda, Karel
Sewage sludge is an inevitable waste stream from wastewater treatment and its disposal is complicated due to specific characteristics of its composition. Sewage sludge combustion/incineration is the only suitable way for disposal of large volumes of sewage sludge containing POPs and some heavy metals. Sewage sludge combustion reduces the volume of such waste and causes destruction of organic contaminants. Oxy-fuel combustion is a technology for simplifying CO2 sequestration from the flue gas by using nearly pure oxygen instead of air for the combustion. In order to control the combustion temperature, part of the flue gas is recycled to combustion chamber. The paper brings information about investigation of the effects of combustion temperature and concentration of oxygen in inlet combustion media on the emissions of NOx, N2O and SO2 in FB combustion of sewage sludge. The experimental results have shown that an increase in combustion temperature leads to an increase in NOx and to a decrease in N2O emissions in the temperature range 750–930 °C. The lowest SO2 emissions were measured in the temperature interval from 800 to 820 °C in all experiments with different oxygen concentration in inlet gas. It was found that when the oxygen concentration in inlet gas increased, the emissions of SO2 increased while emissions of NOx slightly decreased.
Fulltext: content.csg - PDF
Plný tet: SKMBT_C22016112214480 - PDF
|
guest ::
