National Repository of Grey Literature 27,524 records found  previous11 - 20nextend  jump to record: Search took 0.70 seconds. 

Changes in structure and phase composition in the surface of tram rail
Švábenská, Eva ; Roupcová, Pavla ; Schneeweiss, Oldřich
We have investigated structure and phase composition of surface layer of tram rails after long time running and the results were compared with those obtained on the original part of material. Changes due to effects of severe plastic deformation together with thermal shocks by friction process were expected. The information about structure and phase composition was obtained by optical and scanning electron microscopy, X-Ray Powder Diffraction, Mössbauer Spectroscopy and Glow Discharge Emission Spectroscopy (GDOES) and this was completed by microhardness measurements. The results show that the surface layer in comparison with the original material exhibits important changes in grain structure, an increase in microhardness and high content of iron oxide and hydrooxides. According to the depth profile of the chemical composition measured by GDOES there is an increase in carbon content in the surface layer which can be effect of up-hill diffusion.

STRAIN ENGINEERING OF THE ELECTRONIC STRUCTURE OF 2D MATERIALS
del Corro, Elena ; Peňa-Alvarez, M. ; Morales-García, A. ; Bouša, Milan ; Řáhová, Jaroslava ; Kavan, Ladislav ; Kalbáč, Martin ; Frank, Otakar
The research on graphene has attracted much attention since its first successful preparation in 2004. It possesses many unique properties, such as an extreme stiffness and strength, high electron mobility, ballistic transport even at room temperature, superior thermal conductivity and many others. The affection for graphene was followed swiftly by a keen interest in other two dimensional materials like transition metal dichalcogenides. As has been predicted and in part proven experimentally, the electronic properties of these materials can be modified by various means. The most common ones include covalent or non-covalent chemistry, electrochemical, gate or atomic doping, or quantum confinement. None of these methods has proven universal enough in terms of the devices' characteristics or scalability. However, another approach is known mechanical strain/stress, but experiments in that direction are scarce, in spite of their high promises.\nThe primary challenge consists in the understanding of the mechanical properties of 2D materials and in the ability to quantify the lattice deformation. Several techniques can be then used to apply strain to the specimens and thus to induce changes in their electronic structure. We will review their basic concepts and some of the examples so far documented experimentally and/or theoretically.

ELECTRON BEAM REMELTING OF PLASMA SPRAYED ALUMINA COATINGS
Matějíček, Jiří ; Veverka, J. ; Čížek, J. ; Kouřil, J.
Plasma sprayed alumina coatings find numerous applications in various fields, where they enhance the properties of the base material. Examples include thermal barriers, wear resistance, electrical insulation, and diffusion and corrosion barriers. A typical structure of plasma sprayed coatings, containing a multitude of voids and imperfectly bonded interfaces, gives them unique properties - particularly low thermal conductivity, high strain tolerance, etc. However, for certain applications such as permeation barriers or wear resistance, these voids may be detrimental.\nThis paper reports on the first experiments with remelting of plasma sprayed alumina coatings by electron beam technology, with the purpose of densifying the coatings and thereby eliminating the voids. Throughout the study, several parameters of the e-beam device were varied - beam current, traverse velocity and number of passes. The treated coatings were observed by light and electron microscopy and the thickness, structure and surface morphology of the remelted layer were determined and correlated with the process parameters. Based on the first series of experiments, the e-beam settings leading to dense and smooth remelted layer of sufficient thickness were obtained. In this layer, a change of phase composition and a marked increase in hardness were observed.\n

Deposition of Titania from Solution by Hybrid Water-Stabilized Plasma Torch
Mušálek, Radek ; Medřický, Jan ; Tesař, Tomáš ; Kotlan, Jiří ; Lukáč, František
Thermal spraying with liquid feedstock presents a novel route for deposition of functional coatings. In this study, possibility of preparation of titania coatings from solution by hybrid water stabilized plasma torch is presented. Coatings were prepared from solution of titanium isopropoxide Ti[OCH(CH3)2]4 in anhydrous ethanol. Fragmentation of feedstock stream in the plasma jet was monitored by shadowgraphy. Deposition was carried out on steel samples mounted to the cooled rotating carousel. Cross-sectional images from SEM microscope showed successful formation of the deposit with dual morphology consisting of fine feather-like features combined with bigger droplets. X-ray diffraction revealed formation of nanometric rutile crystallites.

Black Chromia Coatings on Metal Tubes for the Solar Collectors
Brožek, V. ; Mastný, L. ; Novák, M. ; Vilémová, Monika ; Kubatík, Tomáš František
This paper describes the results of the first phase of the study preparation, structure and properties of coatings modification of black chromium oxide on copper, aluminium, iron and zirconium tubes for solar collectors. The coatings are prepared by plasma spraying of liquid chromate method which is known as liquid precursor plasma spraying. Coatings have the function of an energy trap for thermal radiation wavelengths of 1 μm – 3 μm i.e. in the IR region. At the same time, the coating increases the corrosion resistance of metal substrates. The nanometric structure and thickness of the coating depend of the feeding distance and the concentration of chromate precursors. For the deposition of nanometric splats of melt chromiumIII oxide, a new type of feeder that injects precursors into the water stabilized thermal plasma produced by the WSP® generator has been\ndeveloped.\n

Satisfaction of women in labour with nursing care during childbirth.
KLÍMOVÁ, Magdaléna
This dissertation investigates the level of satisfaction among expectant mothers with the care services provided during childbirth. Satisfaction reflects a subjective perception of an expectant mother in meeting her needs during childbirth. The feeling of satisfaction is very personal, however, evaluation of the care provided needs to be determined and not ignored. It is important for expectant mothers that the health care professionals present as empathic, friendly, co-operative, and tactful.Theoretical part was developed from evidence-based literature and available findings related to this problematic. There is a description of a childbirth process including a midwife's role during the individual stages of childbirth and options for pain management. Other chapters focus on midwife's approach toward an expectant mother and factors which influence the level of satisfaction during childbirth. Dissertation's aim was to determine whether the expectant mothers were more satisfied in smaller maternity departments, and to evaluate the way a midwife may influence the mother's satisfaction. There were two hypotheses stated and verified by a statistical testing. Hypothesis No. 1: Expectant mothers are more satisfied in smaller maternity departments than larger ones. Hypothesis No. 2: The level of satisfaction is influenced by midwife's empathic approach. Practical part focused mainly on a midwife's approach toward expectant mother. A quantitative research was implemented in form of questionnaires. The research sample constituted of expectant mothers from four postpartum departments in the Czech Republic. In total the sample included 215 expectant mothers, 109 from smaller facilities and 106 from larger maternity departments. In terms of the overall level of satisfaction with their midwife during the childbirth process, 89% of expectant mothers from smaller maternity departments and 83% of expectant mothers from larger departments stated they were satisfied. Conversely, 11% of respondents from smaller facilities and 17% of respondents from larger facilities were dissatisfied. Based on research analysis comparing the level of satisfaction of expectant mothers from smaller and larger maternity departments the hypothesis no. 1 "Expectant mothers are more satisfied in smaller maternity departments than the larger ones" did not show as statistically significant and was rejected. Nonetheless, the questionnaire responses clearly showed that empathic approach of a midwife influenced expectant mother's satisfaction. Statistical testing demonstrated a significant correlation between an expectant mother's satisfaction and empathic approach of a midwife. The second hypothesis "The level of satisfaction is influenced by midwife's empathic approach" was accepted.The research findings may serve as a guiding material for the midwives in order to provide a high quality care to expectant mothers during the childbirth process. They may also be utilised by future midwives who are in undergraduate preparation for the profession, or those professionals who contribute in any way during the childbirth process. Additionally, the research findings may be presented at conferences designated for midwives.

Cutting experiments with ASJ at 1500 bar
Zeleňák, Michal ; Foldyna, Josef ; Souček, Kamil ; Klichová, Dagmar
The aim of experimental work was to determine cutting condition maximal, middle and fine traverse speeds for selected materials and thicknesses. Materials were cut at pressure 1500 bars and 10% of suspension concentration. Secondary objective is long-term monitoring of nozzles wear using X – Ray CT tomography.

The Liberation of Pilsen 1945 in Photography
Křenová, Tereza ; SILVERIO, Robert (advisor) ; JANOŠČÍK, Václav (referee)
This bachelor thesis deals with liberation of Pilsen in May 1945 by american army in photography. The aim of this thesis is finding and collecting archival materials and placing them in a historical-political context. Communist regime changed the portrayal of historical events and directly influenced the amount of exisiting photographs, documents and lives of those who created them. Important part of this bachelor thesis is working with those archival materials – particularly with photographs capturing arrival of Americans and their stay in Czechoslovakia at the end of WW2. Both professional and amateur photographers created valuable photographs as they witnessed the liberation of Pilsen. These photographs became in spite of communist propaganda a clear evidence that Pilsen was liberated by american army.

Sorption and Stabilization of Metals/Mettalloids by Innovative Synthesized Sorbent Amochar.
Ouředníček, P. ; Trakal, L. ; Komárek, M. ; Pohořelý, Michael
Remediation of contaminated soil which is based on stabilization and immobilization of potential\nhazardous substance by sorption materials has been studied intensively nowadays. Biochar – activated organic carbon belongs to this group of stabilizing agents which can adsorb wide range of contaminants, including metals/metalloids. Surface area of the biochars is quite large in general and functional groups (e.g. COO–) can form chelates or alkaline elements on the surface, which is represented by cation exchange capacity. Altogether with the high pH values (7.00 – 10.00), biochars are quite effective sorbents and can adsorb metals/metalloids from the solution (ground water), especially in acidic soils (in the environments affected by intensive mining activities). Sorption\neffectiveness can be increased (especially for As (V) or Cr (VI) sorption) by modification of biochar by various types of secondary oxides. Innovative sorbent AMOchar (AMO + biochar) has been synthesized currently. The product was prepared by adding of biochar to the reaction solution during amorphous manganese oxide (AMO) synthesis. The AMOchar was formed mainly by Mn-oxalates which had coated surface of the pristine biochar. AMOchar composite was able to remove significantly higher amounts of various metal(loid)s from the solution despite the rather high pH of the material. Sorption effectiveness was high not only in case of Pb (II) sorption (almost 99%), and Cd(II) (51.2%), but also a very high amount of As(V), 91.4%. Additionally, both AMOchar composite was able to reduce Mn leaching. This can avoid potential post-contamination caused by the dissolution of less stable Mn-oxalates as observed in the pure AMO.
Fulltext: content.csg - Download fulltextPDF
Plný tet: SKMBT_22316111113040 - Download fulltextPDF

Plasma spraying from liquids: plasma liquid interaction and coating build up
Tesař, Tomáš ; Mušálek, Radek ; Medřický, Jan ; Lukáč, František
Plasma spraying from liquid feedstocks is a rapidly developing field of thermal spraying since the coatings prepared from liquids exhibit some unique features, such as high hardness, thermal shock resistance or low thermal and electric conductivity. The key factor influencing the final coating character and properties is the input material which may be in the form of a suspension or a solution. Parameters of the selected suspension (solids concentration, viscosity, surface tension, chemical composition, etc.) or solution (concentration, etc.) determine its interaction with the plasma jet which strongly influences the coating buildup. This proceeding introduces the problematics of the interaction between the liquid feedstock material with the plasma jet and presents the way of evaluation of the coating buildup.