|
|
Apartment building
Joof, Wally ; Machová, Petra (referee) ; Vajkay, František (advisor)
ABSTRAKTNÍ Cílem předložené bakalářské práce je provést návrh a vytvořit projektovou dokumentaci obytného komplexu umístěného v Brně-venkově (Rajhrad). Budova má čtyři bytových jednotek v každém z pěti nadzemním podlaží. Byty v každém podlaží jsou umístěny symetricky vůči sobě a mají identickou dispozici. Sklepení je navrženo především jako úložný prostor, kočárkárna pro ukládání jízdních kol a kočárků, úklidová místnost prádelna a sušárna a toalety. Nosné stěny konstrukce jsou tvořeny z bloků z vápenného písku, dále příčky z vápenného písku, a monolitické desky. Sklepní prostory tvoří monolitické konstrukce. Střecha je plochá. Celá budova je funkčně i architektonicky navržena s ohledem Na danou lokalitu.
|
|
|
Apartment building
Skaličková, Jana ; Pobucká, Slávka (referee) ; Šuhajda, Karel (advisor)
THE SUBJECT OF THE BACHELOR'S WORK IS THE NEW CONSTRUCTION OF AN APARTMENT BUILDING IN FRYŠTÁK. THE BUILDING HAS FOUR FLOORS AND ONE UNDERGROUND FLOOR. THE UNDERGROUND FLOOR IS USED FOR THE BUILDING´S USERS AND AS TECHNICAL FACILITIES FOR THE OPERATION OF THE BUILDING. THERE ARE INDIVIDUAL HOUSING UNITS ON THE OVERLOAD FLOORS. THERE ARE A TOTAL OF 10 SEPARATE APARTMENTS IN THE BUILDING. ON THE FIRST ABOVE FLOOR, APARTMENT NO. 1 IS DESIGNED AS BARRIER-FREE. THERE IS AN ELEVATOR IN THE BUILDING, MAINLY BECAUSE THERE IS A BARRIER-FREE APARTMENT. THE BUILDING IS WALLED OF BRICK BLOCKS AND CEILINGS ARE OF CERAMIC PANELS. THE ROOF IS FLAT SINGLE COAT. THE BUILDING ITSELF FITS IN THE SURROUNDINGS OF THE HOUSING DEVELOPMENT.
|
|
|
Revitalization of the object
Mík, Petr ; Spáčilová, Jitka (referee) ; Spáčil, Miroslav (advisor)
This master´s thesis called „Revitalization of object“ is compiled as a project documentation according to relevant technical regulations and norms. Object is designed as a four-story building including two below-ground stories and an attic. It is comprised of a brick wall system stemming from present stone foundations and a sloped framed roof. All ceilings are based on existing horizontal constructions. Object is newly laid out as a five-unit flat house with facilities included.
|
|
|
Rodinný dům
Kováčová, Nour ; Sláma, Ludvík (referee) ; Mohelníková, Jitka (advisor)
Předmětem této bakalářské práce je projektová dokumentace a návrh nového rodinného domu s téměř nulovou spotřebou energie. Dům je určen pro šest členů rodiny s překladatelskou kanceláří pro jednoho z členů rodiny. Dům se nachází v klidné části obce Jinačovice, v okrese Brno v Jihomoravském kraji České republiky. Tento objekt je samostatně stojící se dvěma patry, dvěma balkony a velkou okolní zahradou. Svislá nosná konstrukce domu je zděná z keramických tvárnic Porotherm. Vodorovná nosná konstrukce je vyrobena z předpjatých stropních panelů Spiroll. Budova je postavena na základech ze betonových pásů. Střecha je plochá se střešnímí deštovými vpustmi a izolací z minerální vlny. Budova je zateplena systémem ETICS. Projektová dokumentace obsahuje také posouzení požární bezpečnosti budovy, výpočty základů a zatížení, tepelně technické posouzení a posouzení na akustiku a denní osvětlení.
|
|
|
Above-standard family house in Krelov - constructionally technological project
Ježowiczová, Barbora ; Kotek, Lukáš (referee) ; Biely, Boris (advisor)
Subject of this work is pursuance technology of above-standard family house. This diploma thesis contains construction and technology report, technological prescriptions for important parts of buildings, technology report of plant building site, concepts of mechanical assembly, inspection and test plan, technology report of health and safety on the construction site. Budget, calculation and time planning, a drawing of the facilities of the construction site, description of transport relations is included in addendum. Work also contains part about use of Calcium silicate masonry and its comparation.
|
|
|
Impact of injection on mechanical and physical characteristics of mortar
Fridrich, Pavel ; Myslín, Jiří (referee) ; Tomíček,, Oldřich (referee) ; Klečka,, Tomáš (referee) ; Tuza, Karel (advisor)
The increased moisture of the building materials causes the change of its mechanical and physical characteristic. In particular the high amount of loose water in construction shorten the lifetime of the building, is harmful to human beings due to biotic factors and increase the economic expenses of usage of the building. Apart from the costs of rehabilitation the loose water deteriorates the thermal insulative ability (thermal conductivity coefficient ) of perimeter masonry as well. The moisture gets into masonry not only through its deffects but also due to many different reasons. In order to improve the utility value of the buildings we have to deal with the rehabilitation of damp masonry with view to all possible causes. Only the properly working damp proofing ensures the protection against the water leaking from the subfoundation of the building. One of the direct techniques which have undergone rapid progress in last few years is the injection procedure. With use of experimental methods in my dissertation I deal with evaluation of two injection compounds used in Czech Republic and with its impact on the characteristics of the mortar. With the modern hollow bricks (system THERM) it is possible to create horizontal infusion into the lateral mortar grooves in future.
|
|
|
Implementation of the top office building in Brno
Hradečný, Štěpán ; Doubek, Rostislav (referee) ; Kantová, Radka (advisor)
This thesis deals with the technological stage of the gross superstructure of an office building in Brno, which is implemented using a complete system solution. It includes logical and chronological following the successful implementation of this project. It contains the engineering report focusing on rough superstructure, addressing broader transport relations, technical report site equipment, technical note of walls and ceilings, inspection and test plan, machine assembly, safety measures and alternative solutions for the lifting mechanism with another theme.
|
|
|
Apartment building
Najbrt, Milan ; Šoulová, Eva (referee) ; Vlček, Milan (advisor)
The object of the project is a new apartment building in the cadastral area of the city of Brno, the city district of Líšeň. The building plot is of rectangular shape, the entrance to the plot is situated from the local bituminous road. The house is intended for permanent living of 17 persons in 4 apartments and one studio apartment. Part of the building is common areas for providing services to the residents of the house. The services provided a common laundry room, a workshop and a parking space for each apartment unit. The building has four floors (1st floor, 1st floor, 2nd floor, 3rd floor). In the basement there are operating rooms such as a garage with parking spaces, a laundry room, a workroom and a cellar. The architectural design of the house is conceived so that traditional natural materials (brick, stone, wood, metal) can be used in their natural color design. The project further solves the natural light in the central rooms of the building with the aid of light pipes.
|
|
|
Farm house with riding hall
Pressburger, Tomáš ; Pobořil, Lukáš (referee) ; Petříček, Tomáš (advisor)
The subject matter of my Master thesis is a project of an agricultural building with a riding-hall located in Dolný Kubin in the Slovak Republic. This construction comprises from three consecutive buildings. The first single-storey building is designed as a horse stable, the vertical load bearing structures are constructed from a monolithic iron-concrete, a steel truss is designed as the load-bearing roof element, the roof is a sloping aisle roof. The second building comprises of a double-storey operational building with a flat roof, the load-bearing and non-load bearing system consists of a ceramic masonry POROTHERM and monolithic iron-concrete ceilings. The third building is a riding hall, where the load-bearing system consists of steel columns and a gable truss. The strip footings and plain-concrete feet are designed as foundation structures. The project emphasises the layout plan, thermo-technical properties and safety in use.
|
|
|
Residential House in Prague 6
Čejka, Jiří ; Jeneš, Rostislav (referee) ; Podroužková, Božena (advisor)
The thesis called Block of Flats in Prague 6 is composed as a project documentation of the static part. This six-level building was designed as a ferroconcrete monolithic object. Two underground floors are formed by a ferroconcrete frame with columns. There are placed parking slots and also a residential section on these two floors. Four other levels are designed as a ferroconcrete frame with walls. These four floors serve as a residential section. The thesis deals with the complete design of the first floor of one structural unit of the building, and also with some details such as floor slab, bearers, staircase, columns, and walls.
|
guest ::
