|
| |
|
|
Utilization of pyrolysis for liquid fuels production
Hruška, Daniel ; Bělohradský, Petr (referee) ; Hudák, Igor (advisor)
The main content of this bachelor thesis is description of matters of the pyrolysis units. Whereas there is an emphasize on basic description of the function, methods and the chemical processes during pyrolysis reaction in the pyrolysis unit for waste tratment a biomass, comparisons of the advantages and disadvantages selected types of the pyrolysis unit and analyzing of the product gaining during pyrolysis. Thesis also present qualitative comparison of the pyrolysis products and the commonly used fuels. The last part of the thesis is bestowed to a simplyficated mathematical and chemical calculation for energetic efficiency of pyrolysis products and comonly used fuels.
|
|
|
Noise, Transport and Structural Properties of High Energy Radiation Detectors Based on CdTe
Šik, Ondřej ; Lazar, Josef (referee) ; Navrátil, Vladislav (referee) ; Grmela, Lubomír (advisor)
Poptávka ze strany vesmírného výzkumu, zdravotnictví a bezpečnostního průmyslu způsobila v posledních letech zvýšený zájem o vývoj materiálů pro detekci a zobrazování vysokoenergetického záření. CdTe a jeho slitina CdZnTe. jsou polovodiče umožnují detekci záření o energiích v rozsahu 10 keV až 500 keV. Šířka zakázaného pásma u CdTe / CdZnTe je 1.46 -1.6 eV, což umožňuje produkci krystalů o vysoké rezistivitě (10^10-10^11 cm), která je dostačující pro použití CdTe / CdZnTe při pokojové teplotě. V mé práci byly zkoumány detektory CdTe/CdZnTe v různých stádiích jejich poruchovosti. Byly použity velmi kvalitní spektroskopické detektory, materiál s nižší rezistivitou a výraznou polarizací, detektory s asymetrií elektrických parametrů kontaktů a teplotně degenerované vzorky. Z výsledků analýzy nízkofrekvenčního šumu je patrný obecný závěr, že zvýšená koncentrace defektů způsobí změnu povahy původně monotónního spektra typu 1/f na spektrum s výrazným vlivem generačně-rekombinačních procesů. Další výrazná vlastnost degenerovaných detektorů a detektorů nižší kvality je nárůst spektrální hustoty šumu typu 1/f se vzrůstajícím napájecím napětí se směrnicí výrazně vyšší než 2. Strukturální a chemické analýzy poukázaly, že teplotní generace detektorů způsobuje difuzi kovu použitého při kontaktování a stopových prvků hlouběji do objemu krystalu. Část mé práce je věnována modifikaci povrchu svazkem argonových iontů a jejímu vlivu na chemické složení a morfologii povrchu.
|
|
|
Thermal degradation of hyaluronan
Šimáčková, Marcela ; David, Jan (referee) ; Chytil, Martin (advisor)
This diploma thesis investigated thermal stability and the degradation of hyaluronan (HA) in HA with a molecular mass of 90–130 kDa and in HA with a molecular mass of 1 500–1 750 kDa. The following methods were used for the research: rheology, SEC-MALLS, TGA and DSC. Low-molecular HA was subject to time dependency of degradation investigation, where it was dried at a temperature of 90 °C for a period of 30 minutes and 60 minutes prior to the preparation of the solutions itself. High-molecular HA was investigated not only from the point of view of time but from the point of view of temperature dependency of degradation as well. In the case of investigating the time dependency of degradation, high-molecular HA was dried at a temperature of 75 °C at a time range from 15 minutes to 120 minutes prior to the preparation of the solutions. During the preparation of the solutions for discovering the temperature dependency of degradation, the high-molecular HA was then dried for a period of 30 minutes at a temperature range from 60 °C to 90 °C. For low-molecular HA, thermal stability was proven. Therefore, there is no decrease in the molecular mass and the solutions did not demonstrate a significant decrease of viscosity. For high-molecular HA, thermal stability was not proven. Degradation due to the temperature of drying as well as the time of drying occurred, which was demonstrated by a significant decrease in molecular mass and viscosity of the solutions. While in the case of using a drying temperature of 60 °C, a decrease in the molecular mass occurred by approximately 5 %, the molecular mass decreased by approximately 20 % at a drying temperature of 90 °C compared to undried HA. Due to this reason, high-molecular HA was also further investigated by means of the TGA method, where the decrease of humidity of HA samples in relation to the drying temperature was observed. The DSC method was also used. The objective of the DSC method was to find out temperatures, at which evaporation of humidity contained in an HA sample in relation to its form (undried HA, dried HA and lyophilized HA) occurs. This method further finds out the heat necessary to evaporate humidity from an HA sample. To conclude this research, the results obtained for high-molecular HA were compared with the results of other drying processes – lyophilized proved to be a very gentle drying method because a decrease in the molecular mass for lyophilized HA compared with undried HA almost did not occur.
|
|
| |
|
|
Testing of processing stability of PP-g-IA
Hampapa, Břetislav ; Tocháček, Jiří (referee) ; Kučera, František (advisor)
The Bachelor’s study is interested in processing stability of polypropylene grafting with Itaconic anhydride. A present knowledge about thermal degradation of Itaconic derivatives was summarized in theoretical part. Samples were prepared by multiple extrusions technique from virgin PP (Borsodchem, Hungary) and PP-g-IA. Die temperature 230 °C, processing time 4 minutes by 20 RPM. Qualitative and quantity analysis was made by FT-IR spectroscopy.
|
guest ::
