|
|
Steel lookout tower
Kábrt, Michal ; Melcher, Jindřich (referee) ; Karmazínová, Marcela (advisor)
The aim of the diploma thesis was to make a structural design of steel-load-carrying structure of steel lookout tower, in the grounds of domestic brewery in Humpolec. Lookout tower will be part of newly built centre for customers of the brewery. The layout and shape of the load-carrying structure of steel lookout tower follow the brewery chimney with height of 32.7 m with circular ground plan and outside diameter of 3.5 m in the heel and 2.3 m at the top. The chimney is independent of the construction of the lookout tower. The ground plan and dimensions of the lookout tower were considered taking into account the required spacing of the structure from adjacent buildings and ensuring sufficient dimensions for the required passage between the future lookout tower and the existing building of the boiler room. RFEM was used for calculation internal forces and assessment on individual structural elements, according to the valid Eurocodes.
|
|
|
Watchtower in Brno Kohoutovice
Komárek, Ondřej ; Bajer, Miroslav (referee) ; Barnat, Jan (advisor)
The main aim of my master´s thesis was to design a load-bearing steel structure of the lookout tower situated in Brno-Kohoutovice. The height of the load-bearing structure is 35.5 m. My design comprises two different engineering solutions. Solution A is a lattice space frame whereas Solution B works with continuous columns with vertical bracing. For further development, Solution A has been chosen. The proposed structural material is the S355 steel. My thesis includes an engineering report, a statics analysis and drawing documentation.
|
|
|
Steel lookout tower
Kábrt, Michal ; Melcher, Jindřich (referee) ; Karmazínová, Marcela (advisor)
The aim of the diploma thesis was to make a structural design of steel-load-carrying structure of steel lookout tower, in the grounds of domestic brewery in Humpolec. Lookout tower will be part of newly built centre for customers of the brewery. The layout and shape of the load-carrying structure of steel lookout tower follow the brewery chimney with height of 32.7 m with circular ground plan and outside diameter of 3.5 m in the heel and 2.3 m at the top. The chimney is independent of the construction of the lookout tower. The ground plan and dimensions of the lookout tower were considered taking into account the required spacing of the structure from adjacent buildings and ensuring sufficient dimensions for the required passage between the future lookout tower and the existing building of the boiler room. RFEM was used for calculation internal forces and assessment on individual structural elements, according to the valid Eurocodes.
|
|
|
Steel construction of an exhibition pavilion
Wawreczka, Karel ; Šmak, Milan (referee) ; Štrba, Michal (advisor)
The aim of diploma thesis is to design steel roof structure of minimum dimensions 45 m x 50 m and minimum height 12 m. The plan of the building design has dimensions of 52,14 m x 70, 00 m and height is 18,68 m. The roofing was design as 3D truss girders with two lower chords and one upper chord. The shape of 3D truss girder consists of three circular arcs of radius 69,88m, 12,43 m and 33,45 m. Between main girders is 3D bracing. The structure is pin-supported.
|
|
|
Steel load-bearing structure of a sport hall
Cejpek, Martin ; Horáček, Martin (referee) ; Balázs, Ivan (advisor)
The main target is to design and assess the steel structure of a tennis hall. The steel structure is rectangular shaped, single-nave, with a 24 m span and 48 m length (without hanging gable walls). An analysis of two solutions of the supporting structure was performed. The first variant is a pin-supported truss girder connected to columns fixed in the transverse direction and an alternative is a frame construction. Both variants were compared and the amount of steel was found. The selected option was developed in greater detail.
|
|
|
Steel structure of a military museum
Šašinka, Jakub ; Barnat, Jan (referee) ; Štrba, Michal (advisor)
The diploma thesis describes the design and assessment of steel structure of the roofing of the military museum in Králíky. The supporting structure of hall is 40.00 meters span. The total layout are 55.93 x 72.04 m, building height 11.43 m, 16.11 m pylon height. Main construction material is steel, grade S355, secondary constructions are made from steel grade S235, rods are made from steel grade S460. I did optimization of steel structure and chose the best option. For this option I made detailed structural analysis. It is prepared by static analysis of the main load-bearing parts of the structure, including joints and details. The supporting structure of hall consists in the transverse direction from the curved spatial lattice structure made of steel circular tubes which hang on rods on a sloped pylon. Part of the report is open-air roofing.
|
|
|
Multi - Purpose Sports Hall
Baudišová, Monika ; Bajer, Miroslav (referee) ; Sýkora, Karel (advisor)
This thesis deals with design of a multi-purpose sports hall. The aim of this work is to design a support structure with a diameter of 80.0 m at ± 0.000. Construction of a circular layout in the level of ± 0.000 of an external diameter 80.0 m. Height of the hall at the top is 20.0 m Indoors girders is solved in 36 beams which meet at the middle of the rings. Ensure the stability of bracing. Anchoring is done by pin connections located at the bottom of the strip, anchored in concrete bases through the base plate and pre-concreted anchor bolts.
|
|
|
Ice Hockey stadium
Chalupa, Vojtěch ; Šmak, Milan (referee) ; Barnat, Jan (advisor)
The aim of this diploma thesis is the design of the roofing of an ice hockey stadium situated in Žďár nad Sázavou. Plan view dimensions are 55 m x 77 m. The structural height of the roof varies from 10 to 17 m. The roof itself consists of pipe truss girders with a span of 55 m, which are supported by columns on each side. The girders are suspended by a load-carrying arch with a span of 96 m and a camber of 29 m through a system of pre-stressed cables. To determine the internal forces, structural analysis software Scia Engineer was used. Individual elements were then manually designed.
|
|
|
The Roofing of the Sport Hall
Ondruš, Petr ; Straka, Bohumil (referee) ; Buchta, Stanislav (advisor)
The objective of bachelor‘s thesis is design and check the steel construction of the sports building with ground plan dimensions 40,0 x 60,0 m. Building is located in Olomouc. The construction system is built of a transversal arc trusses with spacing 6,0 m. The truss span is 40,0 m and camber is 9,0 m. Trusses are supported by joint bearings. Between transversal trusses are designed the purlins. The construction is stabilized by lateral and longitudal braces. Building is sheated by composite panels.
|
|
|
Steel structure of swimming pool roof
Krchnák, Martin ; Barnat, Jan (referee) ; Štrba, Michal (advisor)
This bachelor thesis describes the design and assessment of steel structure of the swimming pool roof. The supporting structure of hall has 40.00 meters span, 50.00 m length and 10.53 m height. Main construction material is steel, grade S355 and S235. There were compared 2 possible variants of the roofing, and one of them was calculated in detail. There is developed a static analysis of the main load-bearing parts of the structure, including joints and selected details. The supporting structure of roofing consists of the polygonal wrapped lattice structure made of steel circular in the transverse direction.
|
guest ::
