|
|
Family house
Staníková, Radka ; Majsniar, Michal (referee) ; Škramlik, Jan (advisor)
The subject of this diploma work is the new building of a family house at Boží Dar town, that is situated in the mountain resort. The family house has a cellar, it is two storied with an attic apartment. The building is devided into three units . The first unit is found on the first floor and is designed as an apartment. The other units are situated in the attic and are designed for a short-term or long-term renting. The house is designed of cut bricks with a ceramic ceiling construction. The perimeter wall is thermally insulated with a contact insulating system and partly covered with a stony facing. There is a saddle-shaped roof on the house. The building site is sloping north-east. All constructions are in accordance with the valid regulations and ČSN standards.
|
|
|
High Security Turnstile
Láznička, Petr ; Jonák, Martin (referee) ; Pokorný, Přemysl (advisor)
The aim of this bachelor thesis is to propose design solutions both ways-through the turnstile with a high degree of security, in collaboration with the company named Cominfo a.s. Bachelor thesis will be focused on design solution of the turnstile. It should also perform strength check of pin-brake and check the electric motor if is powerful enough. The examination of the pin-brake will be supported by engineering calculations..
|
|
|
The Multifunctional House
Pánek, Martin ; Struhala, Karel (referee) ; Manychová, Monika (advisor)
The main concern of this thesis is to design a five-storey multifunctional house. The house is divided into the main living area to which it belongs especially residential units accessible by stairs from the ground floor and also basement boxes and room for prams. On the ground floor are also located the individual garage, store room and technology. The house has four floors and a basement, the basement are located mass garages. The house has a sloping wooden roof trusses.
|
|
|
Technological Process of the Elevator Cab Production
Trojková, Ludmila ; Osička, Karel (referee) ; Kalivoda, Milan (advisor)
The aim of the thesis is to present the topic of the technological process of the elevator cab production. First, the work will deal with the introduction of the product, equipment, machinery and tools for an enterprise and which suppliers they are from. The second part will deal with the existing technological processes of enclosures made of stainless steel or glass. The last part will focus on the economic evaluation and the proposal to increase the efficiency of the production.
|
|
|
Residential Building
Uhlíř, Karel ; Šafařík, Martin (referee) ; Sukopová, Dáša (advisor)
Diploma thesis develops comprehensive documentation of the new building construction of residential house on the level of the implementation of the project construction. Proposal emphasizes layout of linked to ensure the technical design, structural, fire safety, protection against noise, energy saving, safety in use. Work is performed in an electronic format using AutoCAD and Microsoft Word (PDF Creator).
|
|
|
Home for the elderly
Zboranová, Monika ; Procházka, Martin (referee) ; Sobotka, Jindřich (advisor)
The project deals with structure design of a new – built house for elderly with accommodation capacity up to 28 persons. It is situated on the south side of the village Papradno in a flat lot with area of 6018,4 m2.The house for elderly was designed for disabled people, it has got two floors with irregular shape and the floor area of 920,83 m2 . On the first floor there is an accommodation part of building situated on the southwest side and there is an another part of building where are situated rooms like (kitchen for serving meals, dining room, boiler room, changing room for employee...) it is situated on the northeast side. On the second floor there is an accommodation part of building it is identical as in the first floor. And the another part of second floor it has got rooms like (offices, storages, chapel, club room...). A bearing system composed of uninforcement concret foundation, wall system of ceramic block Porotherm and the slab system composed of bearing panels Spiroll. The Spiroll panels is a bearing system for flat roof with clasic layer order.
|
|
|
Sports hall with facilities and restaurants, Valašské Klobouky
Naiser, Jaromír ; Šteffek, Libor (referee) ; Kacálek, Petr (advisor)
This thesis covers brand new detached sports hall with facilities and restaurants in Walnut Klobouky. Sports hall has a floor partly sunk below the surface, contains grandstand for 340 spectators. The second part, ie background sports hall is in the basement, the ground floor is a restaurant kitchen. The building is designed in plan shape of two rectangles. The roof is gabled and desk. Cladding the halls are ventilated, part of the facilities and restaurants are contact-insulated. Staff restaurant facilities are located in the floor, engine room ventilation are 3, in the hall, first underground floor and first floor. The heat exchanger is designed, which is applied hot water. The finish consists of ceramic tiles in the lobby is used double wood board flooring. The supporting structure consists of prefabricated unit first underground floor SPIROLL.
|
|
|
The polyfunctional house
Fiala, Pavel ; Sedlák, Radek (referee) ; Benešová, Romana (advisor)
Subject matterś thesis is elaborate a project documentation for structural permission for a multi-functional building. Object is situated on the outskirts of town Třebíč. The property is slightly sloped to the south side. The basisc are made from contrete strips. The grand plan of the house consists from rectangles. The house is made by a brick technology of a ceramic blocks. The building is roofed with mono-pitched roofs.
|
|
|
House for two generations
Pifková, Erika ; Šafářová, Markéta (referee) ; Lavický, Miloš (advisor)
The subject of this thesis is to design a two-generation detached house. The building plot is located in the Slovak Republic, on the outskirts of village Okoč. The house is designed for a family of four, and two grandparents, one of whom is in a wheelchair, so the part of the house is solved accessible. House has two floors without basement and is divided into two dwelling units, which are interconnected. The property also includes a garage and a covered parking place, each for one car only. Perimeter walls of the house will be made of aerated concrete blocks YTONG P4-500. The ceilings are designed as half-prefabricated from reinforced concrete beams, aerated concrete liners, reinforcement and concreting. The detached house is covered with flat single-roof.
|
|
|
Family house
Kosařová, Pavla ; Majsniar, Michal (referee) ; Škramlik, Jan (advisor)
The subject of this Bachelor‘s thesis is newly built house for 6 people in the village Slavoňov in district Náchod. House is a single storey, part basement building with residential attic. The building garage, office and residential terraces partially protrude from the main body of the house. The house is designed as a brick building from the ceramic blocks, ceiling structures are reinforced concrete. The roof is gabled main mass with eccentric ridge. Over the working place is designed shed roof. Above the garage flat ply roof. The land is longitudinal, long side oriented SW-NE direction. Slightly sloping, downward from the road. All structures comply with the applicable standards and recommendations ČSN.
|
guest ::
