|
Boarding House Amerika
Pokorný, Patrik ; Pilný, Ondřej (referee) ; Kalousek, Lubor (advisor)
This diploma thesis elaborates project documentation for the construction of building. The building is situated in outskirts of the town Velké Meziříčí. The boarding house for fooding and lodging with separated private zone and restaurant. Both parts connect entrance hall with reception and communication spaces. The lodging section is divided into three stories. Ground floor restaurant and salon with terrace on the second floor have south-facing oriented glazed curtain wall. That is the main part of building with stunning views on the ambient nature.
|
|
Sports Center
Dvořák, Jiří ; Brzoň, Roman (referee) ; Bečkovská, Tereza (advisor)
The diploma thesis deals with design and elaboration of the project documentation of the sports center. The proposed sport center facility is located in the western part of Zruč nad Sázavou, in a location designed for buildings and areas of sport and relaxation use. The object of the sports center is designed as two-storey, non-blocked, roofed flat roof. The main feature of the sports center is the multipurpose sports hall with a single-shell curved flat roof. The supporting element is a curved glued lamellar truss. The proposed contruction of the sports center has 2 functional parts. This is a multipurpose sports hall with backgrounds (dressing rooms, washrooms), two squash courts, a gym and two exercise halls as well as facilities. The sports hal lis complemented by tribune for 380 spectators. The second part is a sports bar with a capacity of 40 people. The perimeter structures of the sports center are designed by a ceramic and insulated mineral wool contact systém with a ventilated aluminum facade. The supporting ceiling structure consists of prefabricated Spiroll panels. Designed 2 VZT engine rooms in 2nd floor, on efor 1st floor and second for 2nd floor including sports hall. Hot water heating by gas boilers. Part of the proposed construction is paved areas of parking lots
|
|
Sport-hotel Frýdlant
Bartoš, Jan ; Svoboda,, Petr (referee) ; Müller, Jan (advisor)
In my thesis I will deal with the draft project documentation for sport hotel. This object is located in the quiet southeastern part of Frydlant with city views and easy access to the nearby sports facilities. It is an object of part two storey and a basement. The building is set into the sloping terrain, so the underground floor extends on to the ground. The building is based on foundation walls and footings that are made of reinforced concrete. Load-bearing walls of the underground floors are designed as reinforced concrete. Ceiling structure of the building is made as reinforced concrete beam ceiling and in other structure parts as a crosswise reinforced concrete plate. Perimeter bearing walls and two floors, are designed from the acoustic sand-lime bricks Silk. External walls are warmed by a contact insulation system. Flat single shell roof was chosen over part of the restaurant. Double-layer roof with a supporting truss structures above the main part of the building. The building is divided into functional parts. Accommodation capacities are mostly on the second floor. On the ground floor there is a restaurant with a kitchen and space for staff. In the basement there is a functional part of the wellness and gym with common dressing rooms. The only entrance path allows convenient control of customers. The building is wheelchair accessible.
|
|
Sports centre Polička
Svoboda, Jan ; Kalánek, Jiří (referee) ; Brzoň, Roman (advisor)
This thesis deals with the design and elaboration process of a project documentation of a sports centre. The designed sports centre building is situated in the southern part of the town of Polička, in the area determined for sports and free time activities complexes and areas. It is a two-floor, non-cellar, flat-roof building. It is based on plain concrete strip foundations and reinforced concrete foundation footing. The bearing, peripheral and partition walls are designed from POROTHERM hollow clay blocks. Reinforced concrete columns are designated in open disposition areas. The ceiling construction is made from SPIROLL pre-stressed concrete floor slabs and point-supported reinforced concrete slabs. The peripheral walls of the first aboveground floor are insulated with external thermal insulation system with a protective gabion facade. The peripheral wall thermal insulation in a bowling restaurant and gym halls extension is designed from a ventilated facade with CEMBRIT METRO facade cladding panels. The building is functionally divided into two main parts with a shared entrance. The sports centre with gyms and other sports facilities form the first part. Three squash courts, a mini-football piste, a special room for spinning and alpinning, a room for group exercising and cloakrooms with sanitary facilities are designed within one part of the sports centre. A restaurant with a bowling area and a kitchen with storerooms and other facilities for employees form the second part. The designed complex is barrier-free. There is aimed to be a car park for fifty cars, four motorbikes and a bus in front of the building. Three parking places are for disabled people.
|
|
Library in České Budějovice
Ernst, Oliver ; Blažek, Petr (referee) ; Čupr, Karel (advisor)
Diploma thesis deals with a project of a new building of a new science library building. The building has four floors and basement. The building will be located in České Budějovice town. The building fulfills the function of the study of books and technical standards. There is designed spaces for organizing lectures and refreshments in cafeteria in the first floor of the building. Library space made available barrier free. Its architectural design resembles the shape of an open book. The structural system meets modern trends in construction and architecture, and it does not interfere with the surrounding buildings.
|
|
Autosalon
Bajer, Radim ; Manová, Ludmila (referee) ; Maceková, Věra (advisor)
This master thesis is focused on elaboration of project documentation for constructing autosalon in Žďár nad Sázavou. Project and appendix are processed by current applicable laws, regulations and standarts. Designed object is situated on plat #6167/2. Both plat sis parts of cadastral area of Žďár nad Sázavou. There are all needed engineering netwoeks nearby. Object is divided on two functional parts, which are operationally and constructionally connected. First part is exhibition and representatice hall, which are capacity of 7 exhibited vehicles. Other partis formed by administrative facilities for staff including sanitary facilities for both staff and visitors. Second part is service for personal and light commercial vehicles with four working stations. Construction is designed reinforced concrete columnar structural system. Plan dimension autosalon is 31,06x22,6m. Plan dimension autoservise is 30,74x18,84m. The cladding autosalon is designed of ceramic tile 250mm. The cladding autoservis is designed of sandwich panel. Roof of building accross the surface is flat roof. Establishment of the object is a combination of footings and foundation belts. Cladding of exhibition hal lis more than 50% glazed. Parts of autosalon and autoservise are designed as sigle storey objects, while administrative part is designed as a two.
|
|
Car dealership with auto repair shop
Wilkonský, Roman ; Vašíček, Vladimír (referee) ; Kacálek, Petr (advisor)
This diploma thesis is being solved for documentation of building in the stage of execution. The building is designed as a showroom with car repair shop. The building site is located in the land registry of Ostrava – Vítkovice. Project documentation is designed accordingly to the valid Czech Republic’s laws, bills and building standards. The building is divided into two objects the first one is showroom with administration and the second one is the car repair shop with washing room and restrooms. These two objects are structurally and operationally connected. The largest plan dimensions are 68,56 x 38,36 m. The building is designed as a reinforced concrete frame in the administrative part and a reinforced concrete wall system in the car repair part. The roof is in both cases realized by using steel trusses. The reinforced concrete frame is lined with aerated concrete masonry. In the roof part it is cladded with sandwich steel panels. The building is founded on reinforced concrete foundation pads with combination of strip foundations. The car repair shop is designed as one floor building, whereas the administrative part is designed as two floor.
|
|
Motorshow
Bár, Radek ; Vémola, Josef (referee) ; Utíkalová, Ivana (advisor)
This master thesis is focused on elaboration of project documentation for constructing autosalon in Kopřivnice. Project and appendix are processed by current applicable laws, regulations and standarts. Designed object is situated on plat #419/2 and partly on plat #419/27. Both plats are parts of cadastral area of Kopřivnice. There are all needed engineering networks nearby. Object is divided on three functional parts, which are operationally and constructionally connected. First part is exhibition and representative hall, with capacity of 11 exhibited vehicles. Second part is formed by administrative facilities for staff including sanitary facilities for both staff and visitors. Third part is service for personal and light commercial vehicles with three working stations. Construction is designed partially reinforced concrete columnar structural system and partially of brick longitudinal structural system. The biggest plan dimension of building is 34.3x35.15m. The cladding is designed of sandwich blocks LIVETHERM tl.400mm. Roof of building accross the surface is flat roof with several height levels. Establishment of the object is a combination of footings and foundation belts. Cladding of exhibition hall is more than 50% glazed. Parts of service and autosalon are designed as sigle storey objects, while administrative part is designed as a two.
|