|
|
Medical center Hlinsko
Pilný, Ondřej ; Burianová, Lenka (referee) ; Kacálek, Petr (advisor)
This diploma thesis deals with the design and elaboration process of a project documentation of medical center in city Hlinsko. New building is situated in the northern part of the city in the area determined for constructions of public infrastructure. It´s a four-floor object with partial basement and slant mansard and flat vegetative roof.Object is based on foundation strips and footings made from reinforced concrete.The bearing and internal walls are designed from KALKSANDSTEIN lime sand blocks.The beams and collums are used in the placed designed with open disposition.The ceiling in 1.PP is designed as reinforced concrete for securing fire safety.The rest od ceiling constructions is designed from prestressed concrete panels SPIROLL,with exception in 4.NP,where the ceiling constructions are made from solid roof system YTONG KOMFORT,which is layed on frame system made of steel and reinforced concrete.The peripheral walls of 1.PP are made from lost formwork, which is insulated with extruded polystyrene.The walls in floors above ground are insulated with combination of external thermal insulation system (ETICS) and ventilated facade with CEMBRIT SOLID and PATINA facade cladding panels. The building is functionally divided into several part.Cafe, pharmacy, ambulance and medical center, each with it´s own entrance.Pharmacy is equipped with shop, medicine mixer and storage.Ambulance is equipped with garage slots, background for employees, room of crisis preparedness and operating center.Medical centrum is equipped with emergency, RTG, operating theater, rehabilitations and other types of examination rooms.Each examination room is equipped with waiting room.For more comfort the center has a background for employees.The whole object is designed with forced air exchange. Designed object is barrier-free.In front of the building is situated parking slots for cars, motorbikes and ambulances.Total number of slots is 74 places, which 5 is designed for disabled people.
|
|
|
Apartment building
Kaňa, Josef ; Pilík, Václav (referee) ; Kacálek, Petr (advisor)
The bachelor's thesis, entitled Apartment building, deals with project documentation at the level of documentation of construction for an apartment building. The building itself is located on the outskirts of the village Holešov in the direction of the village Přílepy. New construction sites have been created in the locality and development is planned. At the time of processing the project documentation, there are no buildings in the area and only preparatory work and installation of engineering networks are taking place there. The object is of a simple rectangular shape set in the middle of the plot. Most of the areas in the building are used for housing, the rest for technical and communication facilities. All living rooms are oriented favorably to the sides of the world. The apartment building has three floors and is partially basemented by one underground floor. Flats on the first floor of 4 + KK, flats on the second floor of 3 + KK, flats on the third floor of 2 + KK. The building is designed with a transverse wall masonry system of ceramic brick blocks, based on foundation strips. The project addresses two variants of ceiling structures, namely folded beam ceilings with superstructure and monolithic ceilings made of reinforced concrete. The building is covered with a flat roof. The building uses the ETICS contact thermal insulation system in a variant with mineral wool.
|
|
| |
|
|
Reinforced concrete structure of the railway platform roofing
Vodová, Pavla ; Bažant, Zdeněk (referee) ; Šulák, Pavel (advisor)
The bachelor‘s thesis deals with assessment of existing damaged reinforced concrete strucutre of the railway platform roofing according to the original project documentation. Apart from assessment of existing structure, there is prepared a design of two alternative solutions. The first alternative is a remediation of damage structure with description of appropriate diagnostic methods for testing concrete structures and with description of technological process of implementation of remediation. The second alternative is design of completely new structure instead of existing one. This new structure is designed as a monolithic frame contruction with restraint reinforced concrete panel and one – step foundation block. In this bachelor’s thesis there were prepared a design and assessment of sub – sections and work – out appropriate drawing documentation. All static assessments are calculated according to ultimate limit state.
|
|
|
Reconstruction and strengthening of reinforced concrete ceiling construction
Klimeš, Petr ; Zich, Miloš (referee) ; Perla, Jan (advisor)
The final thesis deals with strengthening of cast-in-place concrete ceiling in existing construction for couple of escalators. New prestressed beam, columns in new positions and strengthened girder with unbonded strands are building in this adjustments. Every member, including the existing construction, is verified for ultimate and serviceability limit state. Prestressed members are alternatively designed with bonded strands and these variants are comparison in terms of utilization and calculation.
|
|
|
The Steel Structure of a Residential Building
Špeta, Václav ; Barnat, Jan (referee) ; Štrba, Michal (advisor)
The master's thesis deals with a project of the steel structure of a residential building. The building is thought like sevenfloor balcony-access house. The access balcony is situated in atrium in the middle of the building, which is roofed with a shell dome. The regular hexagon creates a ground plan of each floor. Every floor is turned 30 degrees compared to the next floors. The longest cross dimension is 43 m (axial). The height of the building is 30,4 m (including copula envelope). The final structure is chosen on the basis of optimization of the structural variants. The climatic load angle structure falls into the locality of the town Brno. The vertical supporting structure is made from steel-concrete accoupled circular section columns. The floor structure is designed from the steel rolled section I and H. These support assembly of a horizontal structure. Some joists and girder are designed like accoupled with a concrete floor slab. The copula above atrium is made from glue laminated timber ribs. Infill rods are from steel tube. The top ring of copula is designed from the rolled section UPE.
|
|
|
Museum pavilion in Hradec nad Moravicí
Jirkovská, Eva ; Buchta, Stanislav (referee) ; Pilgr, Milan (advisor)
The thesis deals with the design and static assessment of the steel structure of the museum hall. The ground dimensions are 24 x 48 m, the height of the structure is 9,3 m, the roof is saddle-shaped at 6°. The transverse support system consists of a frame structure with a distance of 6 m. The frame supported purlins that carry the roof sheath. In the hall there is a platform made up of floor joist coupled with a concrete slab. The joist are located on the beams that are attached to the inner columns. The stiffness of the system is ensured by wall and roof bracings made of steel rods.
|
|
|
Kidsgarden
Hanšpach, Vít ; Blažková, Vendula (referee) ; Daněk, Lukáš (advisor)
The aim of this thesis is the design and documentation for new construction nursery Schools and the associated layout object. Proposal of appropriate structural system with regard to static and thermal technical part . Kindergarten is designed as an object used for the education of preschool children 4 to 6 years . Kindergarten 4 classes with a total capacity of 72 children. The building has two floors which looks like a cross, without a basement. The main entrance to the building is located on the south side of the building . The main living rooms are situated to the southeast to the southwest. The structural system is build of limestone, concrete partially formed column , base and die . The ceiling structure consists of filigree plates and in the middle of reinforced concrete . Roofing of the building is designed as a flat membrane roof.
|
|
|
Roof Structure of Bus Station
Roušar, Martin ; Šmak,, Milan (referee) ; Barnat, Jan (advisor)
The scope of the thesis is to design a roof substructure bus station in the area of Vysoké Mýto. The structure is designed of steel S355. This is the platform on the roof of two islands. The thesis has been processed by solving two variants, each variant were considered the main structural elements and then comparison was made between the two variants. Of these, one variant was selected for further processing. The first variant has a plan shape of a triangle with maximum dimensions of 58.00 m x 26,75 m. The main load-bearing structure consists of steel columns and girders of rolled sections, or HEB of castellated beams. The girders is the roof structure from rolled I profiles. Covering the roof is designed from the glass with supporting substructure of aluminum profiles. Rigidity is ensured in two ways braces of steel bars. The second option (which was selected for further processing) is L - shaped ground plan with maximum dimensions of 55,25 m x 33.40 m. The main supporting structure is made of rolled steel frames, HEB profiles and rods of steel bars. Supporting roof structure is designed of steel rolled I profiles. Roofing is again solved using the glass structure of aluminum profiles. Rigidity is ensured in two ways braces of steel bars.
|
|
|
Hall for Metal Production with Administrative Building
Kaňok, Vojtěch ; Melcher, Jindřich (referee) ; Karmazínová, Marcela (advisor)
This diploma thesis deals with the design of a metalworking shed with its adjacent administrative center. Both objects are statically independent. The buildings are located in the town of Bučovice. The dimensions of the shed are 54,78x72,58 m. There is an overhead crane situated in the middle wing. The shed‘s height is +11,62 m. The administrative building has L-shaped plan. Its dimensions are 27,62x8,13 m (the wider part is 15,63 m). The design of the administrative object has two variants. Both variants have composite steel-concrete ceiling structure. The heights of the objects are +11,20 m (A variant) and +18,20 m (B variant). For the A variant, drawings were also drawn up with the design and assessment of structural details and anchoring.
|
guest ::
