|
|
Steel structure of an industrial building
Kopecký, Ladislav ; Pilgr, Milan (referee) ; Sýkora, Karel (advisor)
Industrial hall with storage outbuilding. The length of the hall is 72 meters and width of 30 meters. The main hall has a span 24 meters and the outbuilding has a span 6m. The distance between primary steel frame is 6 meters. The height of the main hall is 10.7 meters and a height of outbuilding is 13.0 metres. The roof is flat with roof slope of 3.5% the main hall and 8.75% outbuilding. The structural system of the hall's bar structure. Primary steel frame is designed as a steel frame rafter with eaves haunch. In the roof structure are designed purlins. The stability of the structure is secured by roof braces and longitudinal braces. The hall is pin-supported on the foundation pad. The hall is clad wall and roof panels PUR. Main hall is equipped with a bridge crane with capacity of 8 tons.
|
|
|
Kindergarten
Švadleňáková, Radka ; Blažková, Vendula (referee) ; Daněk, Lukáš (advisor)
This thesis solves the design documentation for implementation of kindergarten. The building site is situated in the urban area of village Vlčnov. The building site is sloping. The slope is oriented to the southeast. Kindergarten is designed as detached brick building with two floors and without basement. On each floor there are two departments for children. The total projected number of children is 60. Kindergarten is accessed from the local road. Each floor has its own entrance from southeast and northwest. The first floor is partially roofed by flat roof – terrace and green roof. Second floor is roofed by gabled roof, consisting of wooden lattice trusses. The building includes a garden for movement and play of children.
|
|
|
Storage hall with administrative part
Žáček, Libor ; Barnat, Jan (referee) ; Štrba, Michal (advisor)
The subject of the bachelor's thesis is the design and assessment of the steel load-bearing structure of a storage hall with an administrative part. The proposed building is located in Uherské Hradiště. The floor plan of the building is 24 x 40 m and the height is 9.0 m. The main load-bearing structure is designed as a two-hinged frame made of rolled IPE profiles. The girders and axillars are designed from thin-walled profiles. The ceiling structure in the administrative part is designed as a composite concrete slab in trapezoidal sheet.
|
|
|
Reinforced concrete structure of a multistoried garage
Klajba, Daniel ; Švaříčková, Ivana (referee) ; Šulák, Pavel (advisor)
The aim of bachelors’s thesis is to design monolithic reinforced concrete ceiling structure of a typical storey of a multistoried garage. The supporting structure consists of a frame consisting of rungs, which are stored by beams and slab. Rungs are supported by columns. Reactions of the structure are transmitted to the foundation soil by footings. The design was made according to standard ČSN EN 1992-1-1 for ultimate limit state. Structural analysis was performed using Scia Engineer 2012 – Student version. The results were validated by simplyfied manual method. Structure was modeled using Scia Engineer 2012 also in 3D together with second option of ceiling structure – locally supported plate. Comparison between these two variants was made.
|
|
|
Tennis hall
Mynaříková, Alice ; Straka, Bohumil (referee) ; Sýkora, Karel (advisor)
The Bachelor’s thesis describes the design and check of the construction of a tennis hall. I have chosen the design of glued laminated timber in combination with solid timber. The plan dimensions of the hall are 23.275 x 67.375 m. The work includes by a technical report, a design calculation, a statement of material and design documentation. Next, the work deals with a special wall system.
|
|
|
Spatial reinforced concrete frame of the industry object
Body, Roman ; Šulák, Pavel (referee) ; Šimůnek, Petr (advisor)
The aim of bachelor thesis is design and appraise the structure of the spatial reinforced concrete frame of the industry object founded on foundation slab. The structure is without the cladding. To the calculation of internal forces is used computing software Scia Engineer 2013.1. Roof slab, rung, beam and column are designed. Designed life of the structure is 50 years.
|
|
|
Reinforced concrete structure warehouse
Vašina, Michal ; Strnad, Jiří (referee) ; Šulák, Pavel (advisor)
Bachelor´s thesis deals with structural design and assessment of most loaded parts of cast-in-place concrete frame warehouse structure. Selected parts of structure are floor structures above first storey, more precisely joist slab and primary beam, which is part of inner main frame, also inner column and foundation pad under the designed column. Structural analysis was provided by computational software IDEA StatiCa, eventual results check is done by simplified hand calculation. Last part of thesis is formwork drawing designed parts of structure and reinforcement drawing of selected elements. The structure was assessed according to the ultimate limit states (ULS) and seviceability limit states (SLS). Assessment was provided according to valid standards.
|
|
|
Reinforced concrete lookout tower
Vaněčka, Jan ; Zich, Miloš (referee) ; Koláček, Jan (advisor)
The aim of this thesis is the static design and assessment of the reinforced concrete structure of the observation tower. The design is further supplemented with visualizations of the architectural design of the structure. Structurally, the observation tower is designed as a locally supported slab by four columns, which are based on footings on the bedrock. The location of the structure is being considered near the ruins of Helfštýn Castle in the Olomouc region.
|
|
|
Agricultural Building
Polák, Vojtěch ; Kostiha, Vojtěch (referee) ; Švaříčková, Ivana (advisor)
The final thesis´s is focused on deals with the design and price comparison of cast-in-place structure multipurpose agricultural hall in two variants. Specifically, it is a variant with structural longitudinal frame and a variant with a transversal saddle frame. The selected elements for the design are the beam, bracing, column, wall, slab and foundation strips. The creation of models and the acquisition of internal forces was done in the Dlubal RFEM program. The result is a price comparison of variants, formwork and reinforcement drawings.
|
|
|
Storage hall with administrative part
Žáček, Libor ; Barnat, Jan (referee) ; Štrba, Michal (advisor)
The subject of the bachelor's thesis is the design and assessment of the steel load-bearing structure of a storage hall with an administrative part. The proposed building is located in Uherské Hradiště. The floor plan of the building is 24 x 40 m and the height is 9.0 m. The main load-bearing structure is designed as a two-hinged frame made of rolled IPE profiles. The girders and axillars are designed from thin-walled profiles. The ceiling structure in the administrative part is designed as a composite concrete slab in trapezoidal sheet.
|
guest ::
