|
|
Gravital conveyor for transport
Fatka, Milan ; Pokorný, Přemysl (referee) ; Kašpárek, Jaroslav (advisor)
The aim was to propose a conveying gravity path for the transport of steel casting in the context of inter-transfer service. The conveyor is dealt with valid norms with regard to simplicity of design, production and assembly (disassembly) with broad use of standardized parts. It was also seen to be done to take advantage of the proposal in solution of similar specification.
|
|
|
Piston for 80kW 4-stroke CI-engine
Vostrejž, Jan ; Dundálek, Radim (referee) ; Svída, David (advisor)
This bachelor thesis deals with a piston design for a four-stroke spark-ignition engine with the power of 80kW. The aim of this thesis is to determine main proportions of the engine, the piston, the crank mechanism and to perform a solidity check of the critical piston crosscuts. The thesis also contains a design documentation of the piston for the spark-ignition engine.
|
|
|
Arrangement of Piston for BMW 2,5 TDS 4-stroke CI-engine
Rada, Lubomír ; Drápal, Lubomír (referee) ; Svída, David (advisor)
In this bechelor work presentation and design a four-stroke piston diesel engine with direct injection diesel by 130 kW, which is used in BMW vehicles. When choosing key dimensions come out of the original dimensions of the piston, used in diesel engine with indirect injection into the vortex chamber 105 kW of power. The draft of the main dimensions of the piston followed by strength calculation of the critical points of the piston.
|
|
|
Steel structure of training tennis hall
Vlček, Radek ; Melcher, Jindřich (referee) ; Karmazínová, Marcela (advisor)
The content of the bachelor thesis is a proposal and evaluation of a steel load-bearing structure of a rectangular tennis hall with a floor space of 40x63 m. The building is situated outside the urban area near the Moravičany municipality. The hall consists of 11 cross-links spaced by 6.3 m. The main load-bearing system consists of spatial arched trusses, purlins and lateral bracing that support the spatial rigidity of the construction. The calculations were made in compliance with the Czech technical norms ČSN EN.
|
|
|
Piston for 147kW 4-stroke SI-engine
Hejda, Tomáš ; Svída, David (referee) ; Dundálek, Radim (advisor)
This bachelor’s thesis deals with the design of piston for 147 kW 4-stroke SI-engine, which is used in Octavie 2,0 TFSi RS. The work is focused to main dimensions of the piston, to make it able to work in difficult, temperature and strength conditions as exposed to in its lifetime. One of the most important part of design this piston is strength calculation.
|
|
| |
|
|
Static design of the structure composed of combination of steel and structural glass
Potůčková, Simona ; Melcher, Jindřich (referee) ; Karmazínová, Marcela (advisor)
The objective of the bachelor thesis is to design the load-bearing construction system and its cladding made of a combination of steel and structural glass and to verify its sufficient resistance. The object has rectangular floor plan with dimensions of 7,5x10,5 m and and its total height is 24,5 m. The building is located at the suburban area of the city Ostrava, precisely Ostrava Poruba. The construction is composed of a ground floor and six upper floors. The main load-bearing system consists of steel frame formed by six tubular columns connected beams and sway bracings ensuring the spatial rigidity of the structure. The object was designed according to currently valid standards using ULS and SLS verification.
|
|
|
Tennis hall load-carrying steel structure
Pham, Hoang Anh ; Melcher, Jindřich (referee) ; Karmazínová, Marcela (advisor)
The content od the bachelor these is a proposal and evaluation of steel load - bearing structure od a tennis hall whit a floor space of 40x30,133 m. The builing is situated outside the urban area ner the Lipno nad Vltavou municipality. The hall consistis of 9 cross links spaced by 5,0 m. The main load – bearing systém consists od arched trusess, purlins, sway bracings longitudinal bracings, that support the spatial rigidity of the construction. The calculations were made in compliance whit the Czech norms ČSN EN.
|
|
| |
|
|
Hangar
Škatula, Václav ; Bajer, Miroslav (referee) ; Sýkora, Karel (advisor)
The final thesis is focused on a project of a load bearing structure of a aircraft maintenance hangar that has a rectangular ground plan 60,0x120,0 m and includes suspended mobile hoist of loading capacity 5,0t. The object is situated in the airport area of Ostrava Mošnov. The task provides two versions of design. The first version consists of eleven traverse joining beams witch are distanced twelve meters from each other. The second version consists of thirteen traverse joining beams witch are distanced ten meters from each other. The thesis focuses on the load pressure of the steel construction, the main emphasis being placed on the single structural components and assembling components. The calculation meet the standards of ČSN EN.
|
guest ::
