|
|
The multipurpose building in Plzeň
Perhalová, Anna ; Straka,, Bohumil (referee) ; Šmak, Milan (advisor)
The subject of this diploma thesis is design and static assessment of timber load bearing structure of multipurpose building in Plzeň. It is cupola consited of two radial curved ribs above a triangle ground plan with one oval edge. I got this shape by cutting the cupola vertically on these two triangle edges and that created two walls of the construction. The largest ground plan dimension of load bearing structure is 54,4 meters and the maximum height is +18,0 meters. The design is processed in two various drafts.
|
|
|
City within city Trnitá block
Kučírková, Veronika ; Šebestík, Petr (referee) ; Palaščák, Michal (advisor)
The topic of the diploma project is a design of a multipurpose building in a given city block structure which was prepared by KAM Brno in a local study plan "Southern Quarter - Trnitá - KAM Brno 2020" as a base material for future local zoning plan of Brno. The site is situated at corner of the block, in a proximity to a park along the river Svratka. The multipurpose building offers space for above-standard apartments as well as for office or commercial business. The massive cantilever created by the upper floors at the corner part is characteristic for the mass of the building and its opening the public space at the lower commercial floors.
|
|
|
The Multipurpose Building in Opava
Gross, Petr ; Struhala, Karel (referee) ; Manychová, Monika (advisor)
The subject of this diploma thesis is the processing of design documentation for realization of the new-build multipurpose building in Opava. The building is designed on the grounds of a former dairy in the Krnovská street where the demolition of obsolete buildings passed off recently. Now are these areas designed to build up again. Designed object will function as a multipurpose building with the operation of a restaurant on the 1st floor, office spaces on the 2nd floor and dwelling units on the 3rd floor. Part of the first floor is a mass garage primarily intended for residents of dwelling units with a total of 9 parking places. It is designed eight dwelling units in total of which six are one-room flats and two are four-room flats. Plan shape of the building is rectangular. The londbearing structure of the building is a reinforced concrete prefabricated precast concrete frame founded on cast-in-place concreted pads. Infill walls are clay brick. The building is roofed with warm flat roof. Dominant features of the building are large glass areas in all floors, metal ventilated facade and loggias of dwelling units. The drawings are processed in AutoCAD programme.
|
|
|
HOUSE ON THE EDGE – Valašské Meziříčí, Sokolská Street
Foltýnek, Jan ; Holiš, Hynek (referee) ; Mikulášek, David (advisor)
LOCATION - The area is located near the historical center and immediately adjacent to the boundary of the zone of urban conservation area and is one of the main pedestrian route from the city center. ARCHITECTURAL FORM - The house is divided by different optical profiling of roof area, which lies a mass of the object. This classification divides and regulates the scale of the building for drop-in with the surrounding buildings. FUNCTION - The building is designed as a multi-functional building with a business partner, housing and administration in the floors and parking
|
|
|
The City instead of the Factory
Vaculovičová, Vanda ; Sátora, Josef (referee) ; Kopáčik, Gabriel (advisor)
Architectural and urban design for the reconversion of the part of the Old Brno (former textil fabric of the company Kras and surrounding areas) based on the existing structure of the Old Brno and ideas of compact city (mixing functions> multipurpose buildings, the divergence between private and public space, higher density of the city ...) The work consists of several parts: planning studies, design transportation solutions, waterfront Svratka concept and design for the multifunctional block on the waterfront. What is important is the idea of calming waterfront Svratka (sheltering services to the proposed tunnel and the cancellation of barrier between the city and the river). The waterfront district should become after more attractive location and provide a space for sport, recreation and afternoon walks. There is a block of multipurpose buildings on the waterfront. A corporate underground garage, which is under the block, should be build by a strong investor / city. After underground garage completion, the site will be divided into several parcels and these will be rented to various long-term investors .Tenants can build buildings on them according to their needs. It is possible to build buildings above the garage in sequence development. The project is just one of many options. Individual buildings are design in scale 1:200
|
|
|
Car show room in Olomouc
Mudrák, Štěpán ; Barnat, Jan (referee) ; Šmak, Milan (advisor)
The subject of this diploma thesis is structural design of a car showroom building in Olomouc. The layout dimensions are 16 x 37 m, the roof is designed as a 5° slope half span roof with cantilever hanging of 6 m. Roof layout dimensions are therefore 22 x 37 m. The object is designed as a two – storey building with two levels of second floor. Maximum height of the structure is about 9,0 m. The design is based on a study of two materiál variants – timber and steel structure. More suitable variant was chosen and following drawings, structural design report and technical report were processed. Main structural system is designed as a one rigid corner column – girder connection, 6 m axis dimensions. Main structural material is a glued laminated timber, completed with coniferous timber and steel elements. The roofing is supported by rafters which are connected to the main roof truss. Bearing element of floors is a Novatop Element structural systém. The spatial rigidity of structure is ensured by steel stiffeners. Structural analysis was carried out by finite element method in software Scia Engineer 21, where the design of the basic elements for ultimate limit state and serviceability limit state was made. Connection design was processed manuály and with software Idea Statica and Hilti Engineering Suite.
|
|
|
Embassy of the Czech Republic in Addis Ababa
Sál, Kristián ; Šubrt, Jan (referee) ; Dulenčín, Juraj (advisor) ; Bečkovský, David (advisor)
In my bachelor's thesis I dealt with the design of the Embassy of the Czech Republic in Addis Ababa, which is the capital of Ethiopia. The basic idea was to create the most compact building possible, which would take into account all specific requirements. In one building there are representative premises with facilities, consular and visa building, office building and residential building. All this is connected by a terrace, which responds to external roads. Only minimal buildings for local staff are completely separate.
|
|
|
City within city Trnitá block
Kučírková, Veronika ; Šebestík, Petr (referee) ; Palaščák, Michal (advisor)
The topic of the diploma project is a design of a multipurpose building in a given city block structure which was prepared by KAM Brno in a local study plan "Southern Quarter - Trnitá - KAM Brno 2020" as a base material for future local zoning plan of Brno. The site is situated at corner of the block, in a proximity to a park along the river Svratka. The multipurpose building offers space for above-standard apartments as well as for office or commercial business. The massive cantilever created by the upper floors at the corner part is characteristic for the mass of the building and its opening the public space at the lower commercial floors.
|
|
|
The multipurpose building in Pardubice
Tunková, Eliška ; Buchta, Stanislav (referee) ; Šmak, Milan (advisor)
The topic of my diploma thesis is a design of a construction of a multipurpose building. The floor plan is of irregular shape with a maximal span of 35 metres. There are two buildings in shape of a hexagon, to which another building in shape of a half of a hexagon is connected. Part of the building is designed as a two-storey building and all parts are different in height. The hight of the designed building in its highest point is 13,5 metres. The load-bearing structure consists of glued laminated wood elements and raised wood with steel elements used as fasteners. The construction is designed alternatively from wood and steel. The static solution was made using the RFEM software.
|
|
|
Wooden multipurpose building in Brno
Kotianová, Miriama ; Šuhajdová, Eva (referee) ; Šuhajda, Karel (advisor)
The main aim of this diploma´s thesis is a design of documentation for construction of the object wooden multipurpose building in Brno. This new building is in cadastre unit Bohunice, is three-storey with a basement. The construction system is designed as a wall (structural) system of CLT panels conducted with cast-in-place reinforced concrete. The project is devised to fit in to the neighborhood.
|
guest ::
