|
|
Family House
Vlčková, Sabina ; Mičan, Přemysl (referee) ; Košíčková, Ivana (advisor)
Bachelor thesis is focused on the elaboration of project documentation for new built single-family house. This is a partial basement building with two floors. The structural system is designed as a bricked from ceramic thermal insulating blocks. The building is covered by two shed roofs with truss supporting structure.
|
|
|
Residential Building
Voráč, Roman ; Sedmidubský, Jaroslav (referee) ; Sukopová, Dáša (advisor)
The apartment house is designed as a full-basement structure, with one underground storey and two above-ground storeys. The access to the building is either by a steel staircase or barrier-free, by a steel ramp. Cars enter the basement by a one-way ramp. The main entrance to the building is located on the first above-ground storey and is connected to the stairwell which serves as the principal vertical communication. The basement floor houses a parking lot, supporting facilities, cellars, and a boiler room. The first floor houses offices, including supporting facilities, and two apartment units, one comprising two rooms with kitchenette, the other a 3+1 (two-bedroom) unit. In addition, there is also a pram room. There are two 3+1 (two-bedroom) units on the second floor. Each apartment has its own balcony. The facade of the building is segmented, serving as a contact thermal insulation system. The building has a saddle roof, covered with gray-coloured seamed metal sheet roofing. Its slope is 13°. The building lies on ribbon foundations and a bearing plate. The structural system is based on brickwork consisting of ceramic building blocks, supplemented by reinforced concrete on the basement floor, and makes use of an outside contact thermal insulation system. The roof structures are represented by reinforced concrete monolithic ceilings. The load-bearing structure of the roof consists of a nailed roof truss girder, with the bottom flange of the girder carrying an SDK soffit – the ceiling structure of the second floor. The building will have a central heating system comprising an electric boiler with an accumulation tank located in the boiler room on the basement floor. Horizontal utility lines are bundled, with two main utility nodes located between apartment units.
|
|
|
Bus station
Kadlecová, Kateřina ; Blažková, Vendula (referee) ; Daněk, Lukáš (advisor)
Master’s thesis addresses the design and implementation documentation of the three storey bus station in the Czech Krumlov Street Hospital . From this street is also suggested links to the transport infrastructure of the entire plot of land at 497/1 . Object Bus Station is located on the western part of the site . The main entrance is oriented to the southeast side of the building. The main hall on the first floor is primarily used for passengers. There is a waiting room , treasury , information and Internet room. Further, the circuit layout is 7 retail space with a pharmacy for dispensing drugs. The left wing spaces are public toilets and sanitary facilities for employees. There is also a buffet with 30 seats . The second floor space small cafe with a terrace where you can view the historical part of the city . Furthermore, the time of day or a rest room for drivers and office spaces with sanitary facilities . On the third floor are offices spaces again and archives there is also a ventilation machine room and a sprinkler system.
|
|
|
Apartment House
Matějů, Šimon ; Osička, Jan (referee) ; Lavický, Miloš (advisor)
THIS BACHELOR WORK PROCESSES PROJECT DOCUMENTATION FOR THE CONSTRUCTION OF THE APARTMENT HOUSE IN THE TOWN OF TABOR. THE BUILDING HAS THREE FLOORS. IN THE FIRST FLOOR IS LOCATED BASEMENT, A TECHNICAL EQUIPMENT AND A GARAGE, IN THE 2ND AND 3RD FLOOR ARE 5 APARTMENT UNITS. THE VERTICAL CONSTRUCTIONS ARE DESIGNED LIKE A BRICK TECHNOLOGY FROM THE KM BETA SENDWIX LIME-SAND BRICKS, COVERED BY THE ETICS CONTACT INSULATING SYSTEM. HORIZONTAL CONSTRUCTIONS S MONOLITHIC. THE ROOF IS FLAT. PROJECT DOCUMENTATION IS PROCESSED UNDER CURRENT VALID LAWS, NORMS AND DECLARATIONS. THE OBJECT IS SITUATED ON THE GROUND FLOOR.
|
|
|
Family house
Zukal, Zdeněk ; Manová, Ludmila (referee) ; Maceková, Věra (advisor)
The bachelor work contains design documents of a standalone family house. This house is situated in the village Lipůvka, region Blansko in parcel no. 662/69 in the land register of Lipůvka. Built up area is 231,3 m2. Family house is two-stroyed, partial basement with an attic. On ground floor is designed entrance, vestibule, bathroom, WC, kitchen, pantry, dining room, tercce, living room, staircase, corridor, quest-room, garage, workshop, dressroom. In the attic are situated three rooms, bedroom, bathroom, WC, dressroom, loggia. In the basement are situated laundry room, boiler room, warehouse appliance. The building is based on foundation strips made from concrete C20/25, all frame structures are designed in the system Porotherm. Staircase is made as monolithic construction with wood paneling. The roof is gabled roof with type of „hambalek“ construction. Roof slope is 35° with ceramic tile of „Tondach Francouska 14“
|
|
|
Health Centre Vizovice - rough construction
Chamrádová, Klára ; Bravenec, Roman (referee) ; Biely, Boris (advisor)
The aim of my thesis is the construction and technological solutions to new building construction site health center in Vizovice. The work involves technical report building equipment, technological instruction for selected activities, inspection and test plans, design of mechanical assemblies, transport links, schedule of health and safety, as well as environmental protection, itemized project budget and timetable.
|
|
|
Apartment building
Křůmal, Petr ; Blažková, Vendula (referee) ; Daněk, Lukáš (advisor)
The subject of the bachelor's thesis is the processing of project documentation for the construction of an apartment building in Prostějov. The building is designed as part of a complex of four separate square-shaped buildings with a common entrance to the underground garage. There are 11 apartments planned on the above-ground floors. The basement of the building houses utility spaces and an underground collective garage. The structural system of the substructure is made of water-resistant concrete. Other vertical and horizontal load-bearing elements of the building are monolithic reinforced concrete. The roof above the garage and the residential building itself is designed as a single-layer flat roof. The thesis includes documentation for construction implementation.
|
|
|
Kindergarten
Bíla, Martin ; Vlach, František (referee) ; Vajkay, František (advisor)
The aim of the diploma thesis is to prepare design documentation for the construction of a kindergarten in Velká Bíteš. The object is designed as a detached, two above-ground floors, and non-basement building. It is located on a fairly flat terrain near the central part of the city. Kindergarten building has four sections for children. Each section is for twenty children, a total of eighty children are designed for the object. The structural system of the object is a longitudinal wall, made of hollow brick heluz. The building is equipped with contact insulation made of EPS (ETICS). Floor structure is solved as a consist of prestressed hollow core slabs spiroll. In the 2nd floor there is a walkable terrace with a growing layer. The flat roof of the object is warm extensive green roof with walkable concrete parts with photovoltaic panels. Part of the work is also an assessment from the point of view of building physics and fire safety.
|
|
|
Apartment building
Kalenda, Lukáš ; Kozubíková, Ivana (referee) ; Matějka, Libor (advisor)
The subject of this bachelor thesis is the preparation of a selected part of the project documentation for the construction of an apartment building. The aim is to design a suitable layout solution that meets the requirements of modern living. It is necessary to choose a suitable design and material sulution. The apartment is set in a slightly sloping terrain. The building consists of 4 floors and basement. The building is based on foundation strips made of concrete. The vertical load-bearing structures are made of ceramic masonry, in the case of perimeter masonry, the load-bearing structure is supplemented by a contact thermal insulation system. Horizontal load-bearing structures are formed by semi-assembled ceramic ceilings. Roof is designed as a green roof. In the basement of the building there are 5 separate garages, utility room, workroom, carriage house and cellar. In the above-ground part of the building there are 9 housing units of a various layouts and sizes. Part of the bachelor´s thesis is also the assessment of the building in terms of building physics (thermal engineering, acoustics, sunlight and daylight) and also in terms of fire safety.
|
|
|
Residential Building Renovation
Horn, Jiří ; Stránská, Zuzana (referee) ; Struhala, Karel (advisor)
The aim of this diploma thesis is a renovation of a two-story family house in Dolní Krupá. The original house is from 1935. It has several newer outbuildings such as garage or storage spaces. The walls are made of solid fired bricks. There is a timber joist floor structure. The main building has a gable roof with timber roof truss. The outbuildings have flat and mono-pitched roofs. The reason for the renovation is the inefficiency of the aging building combined with nearing end of life of some building elements. Also, the layout of the building with multiple outbuildings built during its service life does not comply with contemporary housing standards. Therefore, a large part of the building will be demolished and replaced with new structures. Only the load-bearing walls on the first floor of the main building and the part of the building adjacent to the garage will remain. The new layout will consist of two separate apartments (one on each floor). The load-bearing structures will include ceramic masonry and reinforced concrete floor. The roof truss will be made of wood. The original appearance of the object will be preserved. The house will be heated with an air-to-water heat pump installed next to the north facade of the house. Each floor of the house will be air conditioned by a separated air conditioning unit. As the third part of the work, I chose a life cycle assessment (LCA), using several different building materials for a this renovation.
|
guest ::
