|
|
Inverters for lighting units with LEDs
Zuber, Zalán ; Feiler, Zdeněk (referee) ; Klíma, Bohumil (advisor)
The master‘s thesis deals with DC/DC converters for power LED diodes. Gives an overview of the field of LED lighting technology, analyzes various types of converters and shows their principle of operation. Furthermore presents some possible circuit designs for three different voltage levels and the calculations for each part. As an approval of their functionality the results of their measurements are plotted followed by the data evaluation.
|
|
|
Modification of Vocal Tracks in SW Post-Production of Music
Trkal, Tomáš ; Beran, Vítězslav (referee) ; Černocký, Jan (advisor)
This thesis describes a design and an implementation of a vocal tracks processing application. The application consists of several sub-modules representing audio processors and effects. It is implemented as a plugin created with the VST technology. The plugin provides a simple control system and an integrated database of presets which help mainly less experienced users to significantly speed up the process of processing the vocal tracks. The user evaluation shows that application is successful both in creating demos and professional mixing of music tracks.
|
|
|
Non-linear Circuits with Controlled Current Sources
Dolák, Jan ; Hanák, Pavel (referee) ; Kubánek, David (advisor)
This thesis treats of problems of nonlinear circuits. In introduction the basic possibilities of solving nonlinear circuits are described. Then the basic information on modern current active elements is mentioned, for example current follower, current operational amplifier and current conveyor. In the next part of this thesis the problem of real characteristics of semiconductor diodes is described, major attention is focused on reverse recovery time. Three various types of circuits with nonlinear elements are described in this masters thesis. The first type of circuits are diode precision rectifiers, the full-wave rectifiers containing voltage operational amplifier are most explored, current follower and other active components are described in previous chapters. Simulations in PSpice were executed for each of these circuits. Then the attention was devoted to increase of maximum working frequence. The minimum necessary amplitude of input signal was also analyzed. In the following part two designs of diode function converters are processed, function converter with voltage operational amplifier and function converter with current follower. For each of the diode function converters designed, simulations were executed to find their real properties. The variety of diode voltage limiters and diode current limiters are the third type of nonlinear circuits described, from which the upper limiter and double limiter are investigated in more detail. Simulations were executed for all limiters and their functionality and problems connected with their usage for limitation of high frequency signals were analyzed. In the last part of the thesis there is described the practical realization of precise rectifier, which showed the best ability to process high frequency signals of all investigated circuits. This circuit was realized so that it is able to operate in current and mixed mode. Measured values of real circuits were compared with values gained from the simulations.
|
|
| |
|
|
Diode shaping circuit examples for educational purposes
Kasatkin, Alexey ; Petržela, Jiří (referee) ; Šotner, Roman (advisor)
Tato bakalářská práce je věnována návrhu a realizaci diodového obvodu tvarovače a diodových omezovačů obou polarity s různými zapojeními pro laboratorní. Prvním z nich je tří segmentový obvod tvarovače s aktivním prvkem (operačním zesilovačem). Obvod převádí trojúhelníkový signál na harmonický signál. Druhým obvodem je vykrajovač s proudovým sledovačem, který signál na výstupu odřízne. Třetí je jednoduchý omezovač s nezávislým nastavením úrovně omezení. Cílem konstrukce bylo dosáhnout co nejmenšího zkreslení signálu na výstupu. Funkčnost obvodů byla ověřena simulací a měřením.
|
|
|
Propulsion unit of competition model airplane
Vančo, Miroslav ; Matějů, Jiří (referee) ; Hájek, Tomáš (advisor)
This bachelor´s thesis deals with the design and validation of the operation of the model propulsion system, according to the Aero Design East rules. The introduction is focused on rules and regulations of the competition and then, the point analysis is carried out. The research section is devoted to an overview of the propulsion system components and their basic parameters. The most appropriate configurations of the propulsion system are selected, based on calculations from the manufacturer´s datasheet. These configurations are then validated by measurements of static thrust and measurements in aerodynamic tunnel. In these measurements, the responses of the limiter for boundary power are also examined. In the last part, the choice of the propulsion system is completed.
|
|
|
Universal Audio 1176 Compressor
Pavlik, Miroslav ; Ištvánek, Matěj (referee) ; Koton, Jaroslav (advisor)
The aim of this bachelor thesis is to get acquainted with the issue of analog compressor Universal Audio 1176 and verify the functionality and principles of individual block diagrams of this compressor. The bachelor's thesis is carried out for a detailed analysis of individual blocks of compressor 1176. A practical implementation was constructed, to verify the correct functionality of compressor 1176 on measurements, which were performed in the laboratory.
|
|
|
Lab power supply 0-100 V / 0-100 mA
Hanzl, Ondřej ; Pazdera, Ivo (referee) ; Martiš, Jan (advisor)
The thesis deals with the design of a laboratory source of atypical parameters of the voltage range 0 – 100 V and current 0 – 100 mA, which will be used for testing LEDs, measuring the reverse voltage and characteristics of Zener diodes of unknown data. The power supply will operate in linear mode, where the output part make up a power unipolar transistor controlled by a controlled bipolar transistor. The control section controlling this output stage is a closed control loop with two PI controllers, a differential amplifier and a controlled limiter. In the control circuit, the controllers are arranged in a cascade structure, where the voltage regulator is superior to the current one. Power supply is provided by 2 transformers, one for the power part and the other for the control part. All designed and assembled components will be then placed in a box equipped with a digital measuring device with display.
|
|
|
Shaping networks and limiters for educational laboratory purposes
Barč, Andrej ; Domanský, Ondřej (referee) ; Šotner, Roman (advisor)
This bachelor thesis deals with design and implementation of shaping diode circuits and double - sided diode limiter of sinusoidal signal for laboratory use in low frequency band. This is a 3-segments and 6-segments shaping circuit with and without active element (without operational amplifier). The circuits form a triangular signal to harmonic signal. The aim of the design was to achieve the least possible distortion of the output signal on the largest frequency range of usability. The functionality of the circuits was verified by measurement and a laboratory protocol was constructed from the measurement result. The measurement results were compared with the results of ideal simulated waveforms.
|
|
| |
guest ::
