|
|
Travelling Crab
Komůrka, Martin ; Pokorný, Přemysl (referee) ; Malášek, Jiří (advisor)
This thesis deals about engineering design and calculation hoisting mechanism of travelling crab for capacity 20 000kg and lift height 36m. For this task are made necessary calculations concerning hoist, crane cable, cable pulleys, cable drum. Further, they are drawn strength calculations pin of pulleys, sidewalls, crossbeam and crane hook. Then is also set a drive part of hoisting mechanism consisting of calculation and choice motor, gearbox and brake. The result of this thesis is drawing documentation of pulley block and manufacturing drawings of individual parts.
|
|
|
Stroke mechanism of crane trolley
Julínek, Petr ; Kašpárek, Jaroslav (referee) ; Škopán, Miroslav (advisor)
This bachelor´s thesis deals with proposal basic parameters of stroke mechanism of crane trolley for the weights 16 000 kg. At work is proposed to rope mean, rope drum dimensions, dimensions of pulleys, motor, gearbox, bearing deposit. Individual chapters provide justification for choice of devices.
|
|
|
Electric winch for drilling wells
Volec, Martin ; Kašpárek, Jaroslav (referee) ; Škopán, Miroslav (advisor)
This bachelor thesis undertakes design of two speed electric winch for the headgear specified for the drilling of the water wells through the use of core technology with the loading capacity up to 1000 kgs. Thesis consists of the theoretical as well as the operational part. Theoretical part is occupied with the possibilities of the problem solving, calculates the main winch parameters. In the study the reasons for choices of the main parts of mechanism e.g. electromotor, transmission, winch and others are given. Generally the brief introduction into the problem is inserted in each chapter prior to the calculations. Operational part involves the drawing of the overall configuration and the cable drum setup.
|
|
|
Crab of crane 32t
Elsner, Ondřej ; Jelínek, Petr (referee) ; Kubín, Martin (advisor)
This thesis deals with design four-wheel crab of crane for overhead crane with capacity of 32,000 kg. Contains the functional calculations of steel rope , pulleys, cable drum. The integral part of the thesis constitutes the calculation and choice of driving mechanism for lifting, travel drive and motor drive pulley block hook rotation.
|
|
|
Stroke mechanism of bridge crane
Tomeš, Jakub ; Sedláček, Martin (referee) ; Škopán, Miroslav (advisor)
The bachelor thesis deals with the design of bridge crane lifting gear for a load not exceeding 10,000 kg. The work includes the design of the basic parts of the lifting gear, such as rope diameter, rope drum and rollers. There is also included the choice of standardized parts such as electric motor, crane gearbox, flexible clutch or drum brake. The last chapter describe the strength calculation of the rope drum and the bearing life calculation together with the design of welds and tight pen. The output of the bachelor thesis is the drawings of the cable drum weld and the mechanism of the lifting mechanism.
|
|
|
Design of Lifting Mechanism of Crane
Sokol, Filip ; Malášek, Jiří (referee) ; Pokorný, Přemysl (advisor)
This bachelor thesis deals with design and calculation of the basic parts of lifting mechanism of double girder bridge crane. First part of thesis contains concept of solution. The second one is engaged in own design of individual components and their calculation. Third part contains strength calculation of cable drum.
|
|
|
Design of electric tackle
Bádr, Miroslav ; Kašpárek, Jaroslav (referee) ; Škopán, Miroslav (advisor)
Purposes work was create technical documentation to an electrically driven tackle with actuated by hand undercarriage. Was booked up fundamental parameters like bearing, stroke and hoisting speed. First was effected calculation of load on pinion necks and an idle pulley. Subsequently was effected calculation for right election of a rope, an idle pulley, a rope drum and bearings for the rope drum. Up this calculation followed calculation for a right election of an electric motor and a shaft clutch. The documentation was complemented with pictures and tablets, that are seted near single decisive knots of the tackle. To the documentation was creationed how a suggested arrangement drawing so single subassemblies drawings.
|
|
|
Stroke mechanism of bridge crane
Ujčík, Miroslav ; Malášek, Jiří (referee) ; Škopán, Miroslav (advisor)
This thesis deals with the design of a stroke mechanism of the bridge crane with capacity of load 12 000 kg, which will have served as a plant crane with regular use. The first part of this thesis is devoted to the critical research of similar existing solutions, on the bases of which a suitable order of the arrangement is chosen. The other part of the thesis is devoted to the calculation of the main dimensions of the stroke, on the basis of which the individual components are selected, this are hoist elements of the rope system, such as roller, rope and rope drum, in which the fatigue calculation is performed. Another part of the thesis tackles design and parts calculation of the lifting mechanism, such as electric motor, clutch, brake and gearbox. The final part of the thesis is devoted to the calculation and control of the drum flail, bearing and tension calculation of the parallel key. Constituent part of this thesis is also drawings´ documentation, which enclosed drawing of the lifting mechanism assembly and the welding subassembly as well.
|
|
|
Crane Stroke Mechanism
Vydra, Tomáš ; Pokorný, Přemysl (referee) ; Škopán, Miroslav (advisor)
This thesis deals with design of crane stroke mechanism with lifting capacity of 12 500 kg. At the beginning is research of different design solutions, their comparison and finally selection of the most suitable conception. Before calculation part of each unit is short theoretical part, which brings basic information about issue, whose result in choice of product from catalogues. On the grounds of calculations, firstly hoist parts are chosen, such as rope, pulleys, rope drum and main units of crane mechanism – electric motor, gear box and brake with coupling. Final part deals with strength calculations of rope drum and drum shaft and design of his bearing housing. The practical part of the work are assembly drawings of crane stroke mechanism and rope drum weldment.
|
|
|
Crane Stroke Mechanism 25 t
Strommer, Bohumír ; Malášek, Jiří (referee) ; Škopán, Miroslav (advisor)
The purpose of this bachelor thesis is the proposal of stroke mechanism of travelling crab with lifting capacity 25,000 kg. The proposal consists in calculations of the main dimensions of individual parts of the stroke mechanism, as the pulleys diameters, overall dimensions of the rope drum, rope diameter, then the choice of gearbox, brake, coupling and electric motor. There is a strength calculation of the rope drum and the bearing life calculation. Thesis includes assembly drawing of travelling crab and drawing of rope drum weldment.
|
guest ::
