|
|
The roof structure of a storage area
Kuběna, Kamil ; Sýkora, Karel (referee) ; Puchner, Josef (advisor)
My task was to design and consider the carrier of steel structures for roof storage area in Brno, so that the structure meet all the requirements for buildings and fulfill its function. Roofing, with grand-plan dimensions 50 x 20 m clear height of 4,5 m. Cross sections of the main elements were proposed and considered and also selected joints and details of the structure. Assigned drawings are included in attachments of the thesis.
|
|
|
Technological stage of realization foundantion of storage and factory building
Lepík, Jiří ; Ing.Martin Mohapl (referee) ; Diaz, Yvetta (advisor)
Goal of bachelor thesis is work on construction-technological project of two-aisle hall foundation. Hall load-bearing structure is designed from frames loaded by steely joints. Foundations ratio of building site is complicated therefore will be placed gravel-sand pillows under socle. Building is located in non-developed site on plane terrain and will continue on current factory building. Park of the work will be technological construction of foundation, design of machine set, financial plan and schedule of realization.
|
|
|
Stress-strain analysis of the bar system
Pop, Miroslav ; Profant, Tomáš (referee) ; Houfek, Martin (advisor)
This bachelor’s thesis deals with the issue of rod systems, which represent a special type of construction widely used in the building and mechanical industry. In the introductory part is presented a theoretical basis and methods of static solution of rod systems are described, then it is described stress of rod systems and are derived relations that were subsequently used for the calculation of the specific example. In the practical part, the thesis deals with the analytical calculation of the planar rod system in shape of a power line pylon, for which the cross-sections of the members are designed and the magnitude of the stresses and deformation displacements are calculated. For the calculation, the general method of joints was used and cross sections were designed with respect to the elastic limit state and the buckling stability limit state. At the end of the work, the results of the analytical calculation were verified with numerical solution in software ANSYS Workbench.
|
|
|
Glazier's Hall
Kelar, Petr ; Pilgr, Milan (referee) ; Barnat, Jan (advisor)
The bachelor's thesis deal with structural design of Glazier's hall. Dimension of the hall are 9,24 m x 24,51 m. The basic material is steel S355. The main frame is three-hidged frame. Each frames are connected by the purlins and girts. Spatial rigidity of the structure is provided by the rigid frame corners and sway bracings. Part of the design is crane runway for bridge crane from Demag company with load capacity of 5 t. Structure i designed in compliance with valid standards of ČSN EN and corresponds with ultimate and serviceability limit state. For structural design was used software RFEM 5.07.03 of Dlubal company.
|
|
|
The exhibition hall in Olomouc
Ćmiel, Jiří ; Buchta, Stanislav (referee) ; Šmak, Milan (advisor)
Master's thesis includes designing of exhibition pavilon on a circular platform with a diameter of 35m. The pavilon is designed as a schwedler circular dome. The construction is designed as a ball and is made of tubes. Pavilon includes designing of floors and stairs bearing system that is also made of steel.
|
|
|
Study of static behaviour of selected agricultural objects
Horský, Vojtěch ; Zídek, Rostislav (referee) ; Brdečko, Luděk (advisor)
This thesis deals with the study of static behavior of agricultural buildings, evaluating their existing state using two-dimensional and three-dimensional construction models. Elements that serve to improve static effects of constructions are implemented into these models or replace the currently used elements. Strains of the modified constructions are calculated are applied to qualify the implemented elements and designed joints.
|
|
|
The timber viewtower
Lecián, Martin ; Straka,, Bohumil (referee) ; Buchta, Stanislav (advisor)
The master's thesis deals with design and static assessment of loadbearing structure the timber viewtower on the hill Hostyn. The shape of the structure is very close oblate spheroid. Towers plan shape is a regular octagon whose outer diameter varies along the height. Tower in the footing and in the top measure 10,5 meters, at mid-height measure 6.5 meters. The height of the viewtower is 35 meters and view floor is located at a height of 30.5 meters. The main structure of tower consists outer towers curved wooden columns and interior steel column. Columns support the horizontal beams and bracing provide rigidity of the structure. The roof has a pyramid shape towers and tends to 17 °. Outer columns are designed from glued laminated wood GL24h, others carrying wooden beam are designed from solid timber C24 steel rods are designed from steel S235. Connections are solved using steel components. The work includes structural calculation, technical report and drawings.
|
|
|
Steel Structure of Industrial Building
Buchta, Vojtěch ; Horáček, Martin (referee) ; Brosch, Petr (advisor)
The diploma thesis deal with design of a technological building in Ostrava serving for the sorting of slag to enagle its sequential use. Geometry of the structure was customized to technological requests. Static system was considered in two versions – joint connections with vertical bracing and omni-directional frame. For detail processing was chosen the joint one, besause it showed up as more advantageous. Static calculation was performed by Scia Engineer 14 software, then some typical connections and drawings were manually designed.
|
|
|
Steel footbridge in Černotín
Kelar, Petr ; Štrba, Michal (referee) ; Barnat, Jan (advisor)
The thesis deal with structural design of steel footbridge for pedestrians and cyclist over the Bečva river in Černotín village. Span of the footbridge is 50 m. The basic material is steel S355 and S460. At the beginning were created two variants. First one is an arched footbridge and the second one is cable stayed footbridge. After evaluation variants was selected the cable stayed footbridge. The selected variant was assessed in detail including joints and bearings. Structure is designed in compliance with valid standards of ČSN EN and corresponds with ultimate and serviceability limit state. For structural design was used software RFEM 5.17.01 of Dlubal company.
|
|
|
Fragile World
Jindrák, Matěj ; Monika,, Mitášová (referee) ; Ambrůz, Jan (advisor)
In my final thesis I will focus tonatural wood, whileworking with itin a free manner. I will add other materialsaccording to design process. The res ult will be installation of spatial obj ects into selected environment.
|
guest ::
