|
|
History of Civil Aviation 1970-2000
Zubrvalčík, Jan ; Šplíchal, Miroslav (referee) ; Chlebek, Jiří (advisor)
The main aim of this bachelor‘s thesis is utilize consice summary of history of civil aviation between year 1970 to 2000 and compare their performance. This era is typical with out-set of airplanes with large capacity and new construction solutions. This thesis is focused on planes for long distance with large capacity, but also on planes for middle and short distances too. Thesis is divided by range of airplanes and special charter is about supersonic civil planes.
|
|
|
Fuselage and control system design of VUT 081 Kondor
Kalný, Jan ; Šplíchal, Jan (referee) ; Mališ, Michal (advisor)
This master’s thesis deals with VUT 081 Kondor composite fuselage design and control system layout design. Load computation and selection of critical load cases are made. Principal inner surfaces of the fuselage are designed with respect to basic ergonomic requirements of the crew. Construction materials are chosen and a layup of composite materials is performed. Fuselage FEM model is made in MSC Patran/Nastran system and the structure-strength analysis is given for chosen load cases.
|
|
| |
|
|
Construction parts and Elements of the of Large transport aircraft Fuselage structure
Zubaľ, Filip ; Dubnický, Lukáš (referee) ; Juračka, Jaroslav (advisor)
Fuselage design is an area of aerospace engineering that combines aerodynamics with mechanical and material engineering. Many factors affect the construction and design of the fuselage. The bachelor thesis is focused on the processing and systematic ordering of individual structural units used in large transport aircraft. It points out the diversity of individual structural nodes in the design of the aircraft. The work is divided according to sections of the fuselage, where the specific design solutions for the node are then discussed. At the end of the work, I present a comparison of the two most famous competing aircraft models of Airbus and Boeing company. I pointed out the individual combinations of structural elements. Compared data are processed using tables and schematic figures. The bachelor thesis was also translated into a form of presentation intended for educational purposes.
|
|
|
Fusalage and Tail of Competition Model Airplane
Kminiaková, Tatiana ; Hájek, Tomáš (referee) ; Janhuba, Luboš (advisor)
This bachelor’s thesis deals with empennage and fuselage design of new aircraft for design competition SAE Aero Design East 2020. The introduction is focused on regulations of this competiton and their subsequent analysis. The research part of the thesis takes in consideration possible configurations of the empennage and fuselage and their basic parameters. The most suitable configurations are compared and basic stability and load calculations are done. In the last part structural design is completed.
|
|
|
Design of competition model fuselage
Bednář, Peter ; Löffelmann, František (referee) ; Hájek, Tomáš (advisor)
This bachelor’s thesis deals with the design of the fuselage of the competing model aircraft. The introduction describes the student team, Chicken Wings, and also explains the upcoming Air Cargo Challenge 2019. Furthermore, the search section lists the individual types of materials and carbon composite manufacturing technologies. The second part of the thesis deals with the individual phases of the aircraft design and the definition of fuselage. Moreover, the practical part of the thesis begins with a statistical overview of mass-produced models F3B and F5J categories and the subsequent design of the individual parts of the fuselage and the mass analysis of the model. The conclusion justifies the choice of individual parameters.
|
|
|
History of Civil Aviation 1970-2000
Zubrvalčík, Jan ; Šplíchal, Miroslav (referee) ; Chlebek, Jiří (advisor)
The main aim of this bachelor‘s thesis is utilize consice summary of history of civil aviation between year 1970 to 2000 and compare their performance. This era is typical with out-set of airplanes with large capacity and new construction solutions. This thesis is focused on planes for long distance with large capacity, but also on planes for middle and short distances too. Thesis is divided by range of airplanes and special charter is about supersonic civil planes.
|
|
|
Reconstruction of middle part of the fuselage Z 143 aircraft using semi- monocoque frame
Zamazal, Jakub ; Mališ, Michal (referee) ; Píštěk, Antonín (advisor)
The thesis is focused on reconstruction of middle part of fuselage Z 143 aircraft from truss frame to semi-monocoque frame. In the thesis there is a conceptual design of semi-monocoque middle part of fuselage. The spars of centre wing section are strength controlled. In thesis there is weight analysis according to use the semi-monocoque middle part of fuselage. In second half of the thesis there is a study of retractable landing gear. The thesis shows weight savings according to use a semi-monocoque frame. The thesis also shows that semi-monocoque frame allows other option to upgrade Z 143 aircraft. This thesis can serve as a feasibility study of the reconstruction of the middle part of the fuselage Z 143 aircraft.
|
|
|
Structural design of fuselage and tail for racing model
Skála, Adam ; Hájek, Tomáš (referee) ; Pejchar, Jan (advisor)
This bachelor’s thesis surveys fuselage and empennage improvement of an already existing competition aircraft FabricK. Firstly, the introductory part explains the Air Cargo Challenge contest and describes the model. A research then presents possible empennage designs, which is followed by a brief overview of production F3B aircraft. The practical part of thesis introduces construction project of the empennage and the fuselage as well as a weight distribution analysis. Finally, the concluding part will evaluate the imporvement.
|
|
|
Design of composite aeroplane wing-fuselage joint
Sadovský, Hynek ; Šplíchal, Jan (referee) ; Juračka, Jaroslav (advisor)
This master's thesis deals with design, strength calculation and technological solution of wing-fuselage joint for composite four-seater aeroplane certificated by CS-23. Design is focused on optimal space utilization, low weight and simple manufacturing and assembly. Main output is technical documentation consisting of drawings and technological lay-ups. Conceptual design was chosen after analysis and weight estimation. With strenght calculation for composite materials it was possible to design composition of primary parts and also specify manufacture processes. Assigment was solved by unusuall conceptual design, which claims higher precision manufacturing, but it saves weight.
|
guest ::
