|
|
Cutting as a finishing operation
Bednář, Martin ; Řiháček, Jan (referee) ; Císařová, Michaela (advisor)
The project elaborated design of technology production of the cutting by shaving operation. The component is made from sheet iron 11 321. Pursuant to of the literary pursuit a problem of the shaving and calculation was designed two operations of shaving. Recommended production choice was tool with nominal cutting force 173 kN in first operation and 68 kN in second operation.
|
|
|
Production form-parts by cutting
Hansen, Petra ; Štroner, Marek (referee) ; Dvořák, Milan (advisor)
The thesis elaborated in an undergraduate degree in Manufacturing Technology, proposes a technology for cutting form parts. The specified component is made from 3 mm sheet metal. The material component is structural steel EN S235JRG1. Based on the literature study, several possible methods of production parts are described. After evaluation of the required accuracy, surface quality and yearly volume of production (100 000 units / year) the technology of fine blanking has been chosen. For the production of components will be used: Triple hydraulic press, HFA 3200plus, made by Feintool. Cutting tool has been designed with moving punch, and the tool contains standardized parts. The economic comparison has been made between the methods of precision cutting, trimming and unconventional classic laser technology.
|
|
| |
|
|
Manufacturing of chain wheel for motorcycle
Šarocký, Robert ; Peterková, Eva (referee) ; Řiháček, Jan (advisor)
The aim of this thesis was to propose a suitable technology for the construction process of a chain wheel, which is one of the parts of the drivetrain of a motorcycle. The production series was 200 000 pieces per year. An analysis of several different construction processes was carried out and the process chosen as the most suitable was exact cutting with compression edge. The material of the product was a metal plate (8 x 1000 x 2000) mm 14 220.3, with the width 8 mm.Furthermore, a proposal of a cutting tool was conducted with drawn documentation. Based on the calculation of the required powers the manufacturing machine was chosen, more particularly the three way hydraulic press Feintool HFA 8800 plus. In the final phase, an assessment focused on the effectiveness of the production process was carried out with focus on both the technical and the economic standpoint.
|
|
|
Manufacturing of a Car Door Lock Segment
Vrtiška, Roman ; Peterková, Eva (referee) ; Řiháček, Jan (advisor)
The bachelor thesis is focused on production of car door lock segment, which is made of steel 15CrMo5 with a thickness of 4 mm. Based on the established production quantity of 280 000 pieces per year, the prescribed dimensional accuracy and surface quality of the cutting surface, the technology of fine blanking with vee-ring is chosen. In the practical part of the work, technological controls of the manufactured part are carried out. A coil of the sheet metal as a semi-finished product and cutting plan with the highest percentage utilization were chosen. For established quantity production, 61 pieces of coil weighing 500 kilograms are needed. Based on the technological, control and construction calculations, the tool is constructed, including drawing documentation. Due to the calculated overall force Fc = 1 085,85 kN and the top view area of the tool the triple-action mechanical press XFT 1500speed is chosen. The press is part of the line with the FBA 6/300 coil processing line.
|
|
|
Manufacturing of start segment by fineblanking technology
Tichoň, Ondřej ; Řiháček, Jan (referee) ; Peterková, Eva (advisor)
The thesis deals with the design of the manufacturing technology of the starting segment, which is used to transmit the torque from the starting lever of the motorcycle. The part is made of steel 11 373 in the form of a sheet with a thickness of 6 mm, and the production series is set at 60,000 pieces per year. As part of the thesis, an innovation was proposed, which consists of cold pressing the shaft into the hole, and thereby eliminating the associated welding operation, speeding up production and making it more precise. Due to the required precision and the size of the series, a fine blanking was chosen for the production of the starting segment. Furthermore, coils of sheet metal were chosen as a semi-finished product, while 19 coils with a diameter of 1400 mm and one incomplete coil with a diameter of 1085 mm are needed to ensure the production series. The total force for cutting out two components in one stroke was determined to be 4680,4 kN. Due to the given strength and dimensions of the sheet metal, a triple-action hydraulic press FB one 7000 was chosen for production. The work also includes a technical-economic evaluation, through which it was found that the given production becomes profitable at 34987 pieces. Therefore, due to the size of the production series, it can be declared that the production is profitable.
|
|
|
Manufacturing of a Segment of the Seat Positioning System
Horák, Jan ; Peterková, Eva (referee) ; Řiháček, Jan (advisor)
The bachelor's thesis is focused on the design of technology for the production of a seat positioning system made of sheet steel ČSN 11 373 with a thickness of 2 mm. Due to the adjustment of the production quantity of 200 000 pieces per year, the required dimensional accuracy and surface quality of the cutting surface is used by the technology of production of fine blanking with a pressure edge. Part of the work is the implementation of technological and construction calculations, including the design of the cutting tool with the necessary drawing documentation. An alternating arrangement of cut-outs for a coiled sheet metal blank (Ds = 1 200 mm, ds = 500 mm) is chosen as most suitable in the work, which means the use of 36 coils for a given annual production. In the final part of the work, a three-acting hydraulic press Feintool HFA 8800plus is chosen for the production of the component, which is incorporated into the automated production line FBA 6/300, including all necessary equipment for handling, unwinding and straightening the cut sheet metal strip.
|
|
|
Types and characteristics of precision cutting methods
Hrtús, Vojtěch ; Císařová, Michaela (referee) ; Štroner, Marek (advisor)
Bachelor thesis deals with methods of precise cutting and their analysis. The methods used for production of small series were discussed only briefly due to their small occurrence in practice. In the case of fine blanking, an extensive search is made regarding the individual parameters influencing the quality of the shearing process. Furthermore, the work also deals with the shortcomings of the method and possible ways to modernize the technology, either in terms of quality of the shearing process or in terms of economy.
|
|
|
Production of guiding disc
Slavík, Tomáš ; Peterková, Eva (referee) ; Císařová, Michaela (advisor)
The bachelor's thesis is focused on the design of the production of a guide disk made of sheet metal DC01 with a thickness of 3 mm. The production series is set to 100 000 pieces per year. Due to the required accuracy and size of the series, it was chosen that the guide disk will be made by the method of fine blanking. A coil of sheet metal has been chosen as the semi-finished product due to percentile of material usage and size of the series. For production will be needed a total of 24 coils of sheet with length of 308 m and one incomplete coil with a length of 132 m. The total force was calculated as Fc = 887,3 kN. Due to this strength, dimensions of the sheet and floor area of the tool, a triple-acting hydraulic press FEINTOOL XFT 1500speed was chosen for the production of the part. The last step was to check whether the size of the series is profitable or lossful. It was calculated that production becomes profitable at 49 554 pieces. Due to the size of the series, it can be stated that the production will be profitable.
|
|
|
Production of gear wheel
Tesař, Michal ; Řiháček, Jan (referee) ; Císařová, Michaela (advisor)
The work deals with the design of gear production technology and the required production series is 80,000 pieces per year. After evaluating various variants of gear production, the method of fine blanking with a vee-shaped was chosen, on which the literature search is also focused. The part will be made of material E 295 with a thickness of 2 mm and the semi-finished product is a coil of sheet metal. Part of the work is also the design of a tool, which is based on technological and control calculations. A three-acting press from the company Šmeral Brno FMB 440 was chosen as the machine. At the end of the work, an economic evaluation was performed.
|
guest ::
