|
|
Concrete flat slab supported by columns
Macháček, Jan ; Strnad, Jiří (referee) ; Perla, Jan (advisor)
The aim of this bachelor’s thesis is a structural design of a reinforced concrete point-supported slab for the second floor construction of a hospital. Software RFEM was used for modeling of internal forces, the results were verified by equivalent frame method and moment coefficient method. According to the RFEM results a tension reinforcement and slab shear reinforcement were designed. The deflection was manually calculated. Afterwards, a reinforcement drawing was made. The calculations correspond with ČSN EN 1992-1-1 a ČSN 73 1201.
|
|
|
Connection of Solar Power Plant and Water management
Zajíček, Michal ; Vrána, Michal (referee) ; Baxant, Petr (advisor)
In the bachelor's thesis Connection of Solar Power Plant and Water management the author designs the technical solution of pump control using solar energy. The main reason is to make an automatic system for pumping the rainwater through filters due to increasing its quality. Powering the device with a solar power plant will reduce the energy requirements and will also make it possible to store surplus energy from the solar power plant into the potential energy of the water. The result of the work is the compact device with an automatic control system designed to control small 12 V pumps, theoretical design of the photovoltaic power plant to power the device and theoretical analysis of solar energy and water management issues.
|
|
|
Project of the photovoltaic system
Ševčíková, Kateřina ; Půčková, Helena (referee) ; Kotlík, Josef (advisor)
The diploma thesis deals with elaboration of project solar thermal and photovoltaic solar systems for all-season service. The theoretical part focuses on the general description of the solar thermal and photovoltaic systems, legislation of renewable sources in the Czech Republic and the status of photovoltaics in the Czech Republic. The experimental part deals with the design of measures for energy saving by using solar energy systems. These measures are proposed for construction of houses in Podolí u Brna, especially on extra-family house. The aim of the work is to make a proportioning, choosing the right parts and calculating the economic and ecologic balance. Finally, thesis gives recommendations for further action in saving energy in houses in Podolí u Brna.
|
|
|
Static solution of the ceiling structure of apartment building
Habanec, Kamil ; Nečas, Radim (referee) ; Zich, Miloš (advisor)
The Bachelor thesis deals with the static solution of the ceiling construction of an integrated apartment building. The aim is to design, or change the sizes of the projected structures in the submitted project, to ensure the interruption of thermal bridges and protection against foot noise. Subsequently, their static solution, dimensioning and assessment to marginal states. The elements intended for the solution are ceiling structures above the second upper floor, beams, a connecting staircase and a column. The calculation of internal forces was performed in the student version of SCIA Engineer 20.0 with a comparison of values on an independent simplified model. The work also includes drawing documentation for the aforementioned elements. The calculation was carried out according to the applicable standards and principles.
|
|
|
Design of precast concrete hall
Prášek, Martin ; Nováček, Jan (referee) ; Zich, Miloš (advisor)
Master’s thesis describes the structural design and static analysis of selected elements of prefabricated reinforced concrete industrial building, that will be used as storage hall. Purpose of thesis is elaboration of assembly drawings of the project documentation and drawings of formwork and reinforcement assembly of selected elements. Calculations were performed in computer programs for static analysis SCIA Engineer 16, IDEA StatiCa and FIN EC. Drawing were made in programs Allplan 2016 and AutoCad 2015.
|
|
|
Bridge in Lipová Lázně village
Christ, Roman ; Bezručová, Kristína (referee) ; Panáček, Josef (advisor)
The subject of this bachelor thesis is the design of a perpendicular bridge structure across the Staříč River in the village of Lipová Lazne. The bridge translates communication II. class number 369, design category S7,5. Three design variants of the plate bridge are elaborated on a single field. The chosen variant is solved by means of an additional prestressed plate of a rectangular cross-section of height from 1000 mm to 920 mm in width and length of the supporting structure 20850 mm. The static model is solved as a simply supported plate with a bridging length of 18420 mm. The design was executed according to the standard ČSN-EN 1992-2. Calculation of load effects was performed using Scia Engineering 2019 software. Design and design assessments have been carried out according to the applicable regulations and norms.
|
|
|
Analysis of reinforced concrete bridge
Řeháček, Jakub ; Panáček, Josef (referee) ; Zich, Miloš (advisor)
Bachelor´s thesis is concerned with state estimation of reinforced bridge. The bridge is used to transfer local road across the Svratka river. The bridge is designed as arched bridge with tie and down deck. Lenght of bridging is 24,8 m. Loads and state estimation are done according to Eurocode.
|
|
|
Design of the selected parts of the concrete object
Hrvolová, Markéta ; Horák, David (referee) ; Švaříčková, Ivana (advisor)
The aim of the bachelor´s thesis is the static solution of the selected parts of the reinforced concrete object with drawing documentation included. Project describes the design and assessment of the monolitic slab structure and stairway slab by the first and second limit state. As the part of the thesis is the attachment describing the process of modeling the truss structure. For calculation of the internal forces was used software Scia Engineer.
|
|
|
Superstructure of the backpart of the family house
Jetmar, Ondřej ; Šulák,, Pavel (referee) ; Strnad, Jiří (advisor)
The thesis accommodates a design of a slab made out of reinforced concrete. On one side, the slab overhangs the load-bearing mansonry. The thesis comprises two solutions. In the first solution, the overhung part of the slab is not supported while in the second solution is this part locally supported by pillars. The thesis contains two variants of the slab design and also evaluation of the results.
|
|
|
Heating of the School Building
Holková, Soňa ; Wierzbická, Helena (referee) ; Vendlová, Lucie (advisor)
The subject of this bachelor's dissertation is heating of the Primary and the Kindergarten school's buildings. The main aim is to make a design of the heating system and the hot water preparation. The source of the heat is the hot-water pipe, which the buildings are connected trough the heating coil to.
|
guest ::
