|
|
Architectural and technological project for construction of residential house in Olomouc
Stehlík, Jakub ; Venkrbec, Václav (referee) ; Henková, Svatava (advisor)
Subject of this final thesis is the upper gross production technology of apartment building in Olomouc – Klášterní Hradisko. This work contain technical reports, site family house, device of construction site, technological provisions, overal results, timetable, machine set design, monitoring and test plan, occupational safety.
|
|
|
Structure of apartment building
Řihošek, Jan ; Pulec, Vladimír (referee) ; Perla, Jan (advisor)
The diploma thesis deals with the design of the floor structure of an apartment building in two structural variants. The aim of the work is to find out the internal forces, design and check in two construction variants. Finite Element Method was used for calculation internal forces using 2D model for floor slab and 3D model of building in the Dlubal RFEM 5.24. The work also includes check of masonry walls.
|
|
|
Apartment building
Fišer, David ; Juráň, Vladimír (referee) ; Brukner, Bohuslav (advisor)
This thesis describes the design of apartment building in Vysoké Mýto. It is a detached building with basement, on a slightly sloping terrain. The apartment building has one basement and four above. Consists of a total of 20 residential units. On every floor are situated five flats. External wall are from cast-in-place structure and the roof is designed as a warm flat roof. The work includes project documentation for the construction.
|
|
|
Residential Building
Pastorková, Gabriela ; Mocová, Pavla (referee) ; Mohelníková, Jitka (advisor)
The aim of the Bachelor thesis is to complete the project documentation for the implementation of the residential building. The building has thirteen residential units and consists of four storeys and one underground floor. The building is located in the cadastral area of Brno-Komín in a quiet area. The main entrance is located on the north side of the plot and it is barrier-free. Vertical communication is ensured by a two-arm staircase and an elevator. From the common corridor, there is an entrance to the individual housing units. In the basement there are 13 cellars, utility room, toilet and facilities for a cleaning. On the first floor there is the main entrance to the building, including mailboxes, a bell and the entrance to the pram and bicycle room. From the stairwell, where there is also an elevator, there are three residential units (2x 2+kk and 1+1), one apartment is designed as accessible flat. On the second and third floors there are four residential units (2x 1+1 and 2x 2+kk). On the fourth floor there are two residential units sized as 4+kk. The two-way wall structural system is made of ceramic blocks (in the basement – pre-cast pernament formwork). The whole apartment building is insulated with the contact thermal insulation system (ETICS). The building is based on strip foundations made of plain concrete. The ceiling structure is made of monolithic reinforced concrete slabs and the whole building is roofed with a warm flat roof.
|
|
|
Gallery aviation technology and traditions of aviation at the airport Medlánky in Brno
Blahová, Dagmar ; Žalmanová, Petra (referee) ; Šindlar, Jiljí (advisor)
This thesis describes design gallery of aviation technology and traditions at the airport in Brno Part of my thesis is focused on urban solution of area layout its interconnections with near districts “Komín“ and “Medlánky“. There is new pedestrian, cycling paths, operational and logistic roads inside the complex layout. This design supposed to keep the two existing historic hangars and demolishing remaining buildings with subsequent completion of necessary objects. Priority and the main idea is to keep compositional and visual axis to ensure visual contact with all airport operational parts to ease of orientation. According to this principle is mass and platform solved with object “gallery”. This object in addition to the exhibition space is also used for administration and operation department of the gallery. In separate part there is ensured catering in form of restaurant with associated technical, operational and sanitary facilities. The gallery is designed to visually and physically separate section used by pilots and airport vehicles from visitors to avoid dangerous situation. Other buildings I have designed in my project are “the clubhouse”, airport administration, emergency accommodation, social activity space mainly designed for aircraft-model pilots and the air traffic control tower. These objects creates border between premises restricted for aero club and visitors.
|
|
| |
|
|
Monolithic reinforced concrete detached house
Koždoň, Jakub ; Holešovská, Anna (referee) ; Sobotka, Jindřich (advisor)
The subject of this bachelor thesis is a newly built cast-in-place detached house in the village called Křepice u Hustopečí. It is a double-storey building without cellar. The shape and height position of the house is adapted to vertical alignment of the ground. The house is designed for four family members. The main entrance to the building is from the north side in the first floor level. The garage for two cars is a part of the house. The main residential rooms are situated to the south and east side of the building. Vertical load-bearing structures are made of a cast-in-place reinforced concrete as well as staircase. Partitions are made of clay blocks. The floor structures are composite steel and concrete structures and the roof is mono-pitched. The dominant elements of this detached house are big windows leading to the garden and connecting the house with the surrounding environment. The project was processed by computer software ArchiCAD 16.
|
|
|
Prestreesed concrete slab
Benčíková, Mária ; Kalenda, Jan (referee) ; Perla, Jan (advisor)
The diploma thesis deals with the design of a reinforced concrete floor structure above the 1st floor of a two-storey pavilion of a spa complex. It is a point-supported slab with the use of prestress. The design is converted with respect to the required fire resistance of structures. The analysis of internal forces is performed by manual calculation using the method of spare frames and using the computational software RFEM 5.23, which uses the finite element method. The design is made according to the group of standards ČSN EN.
|
|
|
Production buildings, Production of aquariums in Brno
Drápela, Jan ; Maar, Radek (referee) ; Boleslavská, Yvona (advisor) ; Bečkovský, David (advisor)
This bachelor thesis aims to design a new building for manufacturing aquariums with part for administration and public part in Horní Heršpice. This project is based on a study made on a subject named AG035. Horní Heršpice is Brno city district located in the south part of the city. The building plot is located on the street Sokolova. The building plot has an irregular rectangular shape without major restrictions. The building can be visually divided into two parts – lower one front with public part and administration and higher part with production hall. The front part is partially sunk below ground level which brings it closer to passing visitors and offers views from the aquarium. Compared to other buildings it is clad with yellow corrugated facade panels. The entrance hall opens to visitors and provides separate entrances to the exhibition space in one part and administrative space in the other part. The second building is significantly higher clad in bright color panels. From one side there is an embedded lower part with support areas with yellow cladding. The buildings gradually rise. Both buildings are connected with a glazed corridor. One of the primary tasks of the design is to create a well-organized and collision-free space. The building is divided into two different hight levels and has no cellar. A structural system of administrative part is a cast-in-place concrete structure, the production hall with support areas is from precast concrete frame.
|
|
|
Construction technological project of the production hall in Sudoměřice
Kolacia, Tomáš ; Vlčková, Jitka Laura (referee) ; Venkrbec, Václav (advisor)
The subject of the diploma thesis is construction-technological solution for realization of the production hall with administrative part in Sudoměřice. Parts of the thesis are the technical report for the construction-technological project, a study of the realization of the main technological stages of the building, the solution of the wider transport route links, where I designed and assessed selected transport routes. The other parts of the diploma thesis are design of a site equipment with the technical report of the site equipment, design of the main building machines and mechanisms. The time and financial plans of objects are elaborated, followed by the detail time schedule of the realization of the main building obejct with a workers needs diagram and the item budget of the main building object with the bill of quantities. For the proces of the realization of the reiforced concrete prefabricated construction, the technological regulation for the assembly of elements with usability of the mobile crane, was made. In the diploma thesis, the technological regulation for the reiforced concrete cast-in-place columns and bond beams, was also prepared. Due to the high demands on the quality of the construction, the control and test plans for the assembly of the reiforced concrete prefabricated elements and for the cast-in-place columns and bond beams, were also prepared. Within the environmental protection, the requirements for the certification LEED 2009 Core & Shell, were processed.
|
guest ::
