National Repository of Grey Literature 44 records found  previous11 - 20nextend  jump to record: Search took 0.01 seconds. 
Container sewage treatment plants up to 500 PE
Krejsová, Věra ; Kaštanová, Barbora (referee) ; Hluštík, Petr (advisor)
The aim of this bachelor´s thesis was making a survey of companies involved in producing container type waste water treatment plants in the domestic market. In the first part of the bachelor´s thesis there is an overview of types of plants, including the method of implementation, use and placement and subsequent operation. In the practical part there is a list of companies active in this field in the Czech Republic that were compared to each other in terms of technological, machine-technological and financial aspects depending on the population for which they are intended for. Data provided by these companies and their processing can be used in selection of container of waste water for expert and unprofessional public, which is considering the acquisition of container plant.
Methodology for remote diagnostic of the automotive shock absorbers
Halama, Jakub ; Dočkal, Aleš (referee) ; Klapka, Milan (advisor)
The diploma thesis deals with the application of acoustic methods for evaluating the technical condition of the shock absorbers. Analysis of acoustic radiation during damping operation leads to the definition of a new non-contact diagnostic methodology that can determine the condition of the shock absorbers. The first part of the thesis focuses on the noise radiation of the shock absorbers, which is caused by discontinuous dumping. Further, the methods for the noise source localization available at The Institute of Machine and Industrial Design are described – with their functionalities, advantages and limitations. Based on all the information, an appropriate method is selected and used in the experimental part of this work. Then, aeration and removing the full volume of oil with damage of the shock absorber tube are caused (induced) on several types of the shocks. Noise radiation is measured by a microphone array and by a sound meter; the acoustic maps, frequency spectra and the synchronous filtration graphs are calculated from the measured data. From the differences in the acoustic radiations of each shock condition, a suitable diagnostic criterion for a specific shock absorber is defined. The final part discusses obtained results. Based on these results, a general diagnostic methodology, applicable to any type of shock absorber, is formulated.
Process of destratification at Brno dam reservoir
Marek, Tomáš ; Maršálková, Eliška (referee) ; Palčík,, Jiří (advisor)
This thesis deals with the process of destratification at the Brno dam reservoir within the activities of a larger project "Clean Svratka", aimed to improvement of water quality in the catchment area upstream the Brno dam. At the Brno dam the project "Implementation of measures at the Brno Reservoir" has been in progress for the third year. Its aim is the proposal and implementation of measures to suppress the cyanobacteria mass development in the dam lake. One of the key measures is aeration and mixing of dam water through a 20 aeration tower. The theoretical part of this thesis focuses on seasonal conditions in the dam lake, the technology suitable for destratification and aeration and possibilities of their use. In the practical part of the thesis the seasonal destratification and the impact of meteorological conditions are monitored.
Comparison of aeration elements
Stříž, Michal ; Beňo, Zdeněk (referee) ; Pěček, Jan (advisor)
The content of the thesis is to compare the aeration elements used in the aeration tank for biological treatment of wastewater. In order to compare, the work contains description and explaination of: ? basic division of functions and some aeration systems, ? transfer of oxygen, ? the use of pure oxygen instead of air, ? placement of aeration elements into the activation tank. Since the aeration elements are plentiful, work is focused on the most widely used pneumatic and mechanical aeration systems.
Influence of selected parameters on biotechnological production of polyhydroxyalkanoates
Eremka, Libor ; Pekař, Miloslav (referee) ; Obruča, Stanislav (advisor)
The aim of this work is to study microbial production of polyhydroxyalkanoates (PHA). Theoretical part is focused on production of PHA using microoganisms and transgenic plants. Bacterial strain Cupriavidus necator H16 was used for laboratory production of PHA. Various waste oils were used as sole carbon and energy source. Salt of propionic adic and 1-propanol were used as intermediate for 3-hydroxyvalerate monomer (3HV) unit. Incorporation of 3HV to polymer can improve material features of PHA. The major part of experimental work was focused to study influence of aeration (concentration of dissolved oxygen) to bacterial growth, selected metabolic pathways and formation of PHA. Furthermore, influence of aeration to monomer composition of polymer was evaluated. According to experimental conclusion of this work it was approved dependance between aeration and monomer composition of PHA. Moreover, it was approved that higher concentration of oxygen supports bacterial growth and influences PHA content in cells. In addition, NADPH is one of the substrates influencing flux of acetyl-CoA throughout the metabolism; higher intracellular concentration of NADPH inhibits TCA cycle and enhances accumulation of PHA in cells. For this reason, specific enzymatic aktivity of several selected intracelular enzymes were measured, including those enzymes which can generate NADPH.
The effects of different agro-technologies on the soil physical quality in selected localities in the South Moravian Region
Bažantová, Adéla ; Doležal, Petr (referee) ; Kameníčková, Ivana (advisor)
Farmland is being handled by various the tillage of soil especially for the correct course of soil processes, plant growth and development and of course profit. There are two types of the tillage of soil are their conventional (classical) which involves plowing and minimization tillage, where is excluded plowing. The last few decades, the development the tillage of soil focuses on minimization tillage. This includes loosing up small depth, soil conservation tillage and direct seeding. This thesis is aimed at impact of minimization tillage on selected physical and hydraulic properties of the soil. Sampling undisturbed soil samples was performed on the experimental plot Kozlany by Kopecky rollers (V = 100 cm3) from depth of 0 - 10 cm, during the year 2016. On this plot was used minimization tillage in the form loosing up small depth and direct seeding.
Assessment health/quality of the soil near the village Bohaté Málkovice
Suchá, Kateřina ; Doležal, Petr (referee) ; Kameníčková, Ivana (advisor)
Diploma thesis evaluates quality and healthiness of the soil health located close to Bohate Malkovice focusing on changes in both physical and chemical characteristics of the soil in time. The theoretical part describes physical, chemical, and biological parameters of the soil. Selected physical parameters are structure, texture, determination of measured weight, bulk density of the soil, porosity, actual volumetric water content of the soil, aeration, saturated and unsaturated hydraulic conductivity, infiltration, and colour. Chosen chemical parameters are pH, carbonates, soil electrical conductivity, and humus content. Picked biological parameters are microbial biomass, respiration, nitrogen content, and weed infestation. The practical part analyses selected indicators of quality of the soil from the location of the experiment close to Bohate Malkovice. The area under evaluation has been treated using reduced tillage for long term. The practical part is based on the laboratory examination of disturbed and undisturbed soil samples taken between years 2016 and 2018. Based on outcome results we can evaluate the quality of the soil considering plants growth, development, and soil fertility.
Machine Technology, Equipment supply air
Pecháčková, Tereza ; Janás, Pavel (referee) ; Hluštík, Petr (advisor)
The content of the thesis is describing various version of setting oxygenation capacity for different aeration device. Explanation of mutual connection of water and air in the wastewater treatment process. Practical part is creation of database of the most frequently used machinery device for the delivery of air to the wastewater treatment, introduction with companies providing offer of aeration systems on the Czech market, or with companies representing another abroad companies.
Verification of durability of ash concrete in the environment XF
Kušiak, Petr ; Hela,, Vlastimil (referee) ; Hela, Rudolf (advisor)
Fly ash is now much used as an admixture to concrete. This master´s thesis focuses on the use of fly ash as an active admixture in concrete environment for XF. The thesis has two parts. The first part collected theoretical information about the origin and behavior of fly ash in fresh and hardened concrete. In the second part was experimental verification of these characteristics. The purpouse of this thesis is to demonstrate that the fly ash attribute to meet all environmental XF.
Devices for Oxygen Adding into Water.
Chmatil, Ľuboš ; Rinka, Lukáš (referee) ; Štigler, Jaroslav (advisor)
This thesis includes the theoretical part explaining problematic of devices for oxygen adding into water, priciples that can be used for adding oxygen into water, areas where can be these devices used and their analysis.

National Repository of Grey Literature : 44 records found   previous11 - 20nextend  jump to record:
Interested in being notified about new results for this query?
Subscribe to the RSS feed.