|
|
Entrance zone objects of WANEMI, a.s. paper-mill in Zábřeh
Malovcová, Zoe ; Zemánek, Václav (referee) ; Zemánková, Helena (advisor)
Diploma thesis completes with its design large project of Wanemi company, a.s. in energetics sphere and paper industry. The area of planned paper mill in Industrial zone „Leštinská“ in Zábřeh is logically divided into three functionally graduated zones- zone of production, zone of extend and enter zone. The enter zone makes up some „green“ borderline between road lined ground of paper factory and production areal itself. The task of diploma thesis was to design complex solution of this enter „green“ zone, included situation and design of presentation pavilion and administration building objects.
|
|
|
Y Soft Campus - the semi-abandoned shooting range area in Brno-Pisarky
Lysá, Karolína ; Hýl, Petr (referee) ; Kratochvíl, Jan (advisor)
On one side a quiet location surrounded by forests in close proximity to the center of Brno. On the other hand, an ambitious young company specializing in software and hardware for printing, copying and scanning. Interference of the latest technologies and nature. Finding a modern job concept and the benefits associated with it that attract other prospective employees. Emphasis on project ecology. Keeping the recreational character of the site. Work with relatively sloping terrain and with orientation to the world sides according to the requirements.
|
|
|
Office building with furniture production
Neuner, Jakub ; Straka,, Bohumil (referee) ; Šuhajda, Karel (advisor)
The aim of this master thesis is to design a building consisting of joiner workshop and administration part of furniture factory. Building is located in Brno, cadastral area Horní Herpšice. In terms of funcion as well as structure is building devided in two parts, joiner workshop and administration part containing hygienic facilities for workers, canteen for employees and furniture showroom. Joiner workshop is single-deck skelet structure made of glued laminated timber. Administration part has two above-grade floors. Cross laminated timber panels are used for vertical and horizontal bearing structures. Building facade is designed as ventilated, partly made of cement fiber boards, partly of timber boarding along with green panels. The building has one-layer green roof.
|
|
| |
|
|
Y Soft Campus - the semi-abandoned shooting range area in Brno-Pisarky
Kuklová, Alexandra ; Dundáček, Josef (referee) ; Kratochvíl, Jan (advisor)
The new headquarters of Y Soft is divided into three objects, both functional and visual. The main building consists of a five-storey block with an internal atrium, followed by a ribbed three-storey structure. The entire complex ends one-storey production, half-floored in the slope. The playful facade of the first object complements the regular lines of the ribbed object. The facade is faced by the same manufacturer with the same pattern, but with another shade, gray and brown. The third facade is made of concrete. All three buildings unify the same material and color of window frames and the type of exterior blinds.
|
|
|
Y Soft Campus - the semi-abandoned shooting range area in Brno-Pisarky
Formánek, Jakub ; Dundáček, Josef (referee) ; Kratochvíl, Jan (advisor)
The main goal of the bachelor thesis was to design a campus for YSoft, software company, in the area of formal shooting range in Brno, Pisárky district. The design comprise urban solution of the area to make it a valuable part of the city with the YSoft headquarters as an icon of the area. Because of the terrain shape (very steep hill) the area is divided into three main hight levels. Each of them has its own public equipment and connected to each other. Area building comprise commercial opportunities, places for rest, administrative budildings or dwelling for example. There is a new motorway created to serve the needs of the neighborhood. Area is also reachable by bike of on foot from reopened bus station of the public transport system. Parking places are mostly situated under the ground. The YSoft building has two underground floors and nine more above the ground. All the parts of the comapny are situated in the best possible way to make communication and interaction easier and offer an opportunity to meet somewhere else than over the woring desk. The budilding is also equipped with game rooms, realx rooms, gym and a restaurant. Construction system is made from pillars made from reinforced concrete and supported by other parts. The facade is covered by aluminium pieces. Shading system is placed outside and it is supported by its own construction.
|
|
|
ZOO Entrace with Pavillion
Grégr, Jakub ; Závorková, Kateřina (referee) ; Králová, Zuzana (advisor)
The diploma thesis deals with design of two separate buildings, stands in the new entrance area Zoo Brno. This is the entrance building, which has two floors and it is designed as a wooden house. The wooden supporting structure is complemented by Isover mineral insulated and sheathed gypsum boards Fermacell. The hipped roof truss with a slope of 20 °. Built-up area is 261.2 square meters. This is followed by pavilion of reptiles. It has a basement floors of reinforced concrete walls and on one side recessed into the hillside. The first floor is designed as a wooden house again. The hipped roof truss. Built-up area is 276.7 square meters. The main entrance is situated on south.
|
|
|
Production hall with facilities
Malec, Pavel ; Vítámvás, Zdeněk (referee) ; Utíkalová, Ivana (advisor)
The subject of my thesis is to elaborate the project documentation for construction execution of an administrative building with added production hall which is found in the town Benešov near Prague. The object of the administrative building has one underground and free above-ground floors. The underground floor serves for operating purposes connected with production. The first above-ground floor serves for staff catering. On the second above-ground floor we can find social rooms, dressing rooms and washrooms for employees. Offices can be found on the last third above-ground floor. Vertical supporting constructions on the underground floor are made of blocks filled with concrete i.e. 300 mm. On the above-ground floors rhere are vertical supporting constructions which are made by walled technology from ceramic Therm blocks i.e. 300 mm. Vertical constructions partially consist of precast wall panels and partially of monolytic panels i.e. 250 mm. The roof is designed as a flat green area. During the design processing the impact was put on increased comfort for using and overall modern concept of the object.
|
|
|
Steel Structure of the Office Building
Ruček, Martin ; Pilgr, Milan (referee) ; Hron, Lukáš (advisor)
Main concern of the thesis is a structural design of main load bearing elements of steel, four-storey high administration building. Designed building has 36 m long and 24 m wide rectangular footprint. Roof is shaped into a hyperbolic paraboloid surface. Main load bearing structure is consisting of six main cross sections formed by truss columns, and generally curved roof truss beams, accompanied by storey supporting frames with composite slabs. Overall shape of the roof is defined by warped surface. Cladding of the building is consisting of aluminium facade system.
|
|
|
Administrative building
Polerecká, Katarína ; Pešek, Ondřej (referee) ; Štrba, Michal (advisor)
The aim of this thesis is design and assessment of the steel structure of the multi-storey administration center in Martin. Floor plan dimensions are in the shape of a square 40 x 40 m. Column spacing is 8mx8x. Building has 6 floors and total height is 22,2m. Floor and roof structure is made of steel-concrete composite slab . Part of the work is analyze two different versions. Version A has longitudinal rigidity due to truss bracing. Rigidity of Version B has is ensured by frame conections between beams and columns.Version A was selected as better solution. All parts, except truss braicing is made of rolled beams. The whole structure is made of steel S355.
|
guest ::
