|
|
Cylinder unit of motocycle two-stroke engine
Stejskal, Miroslav ; Novotný, Pavel (referee) ; Píštěk, Václav (advisor)
Miroslav STEJSKAL Cylinder unit of motorcycle two-stroke engine In the beginning is briefly described two-stroke engine features. Furthermore, according to the set of basic geometric and thermodynamic parameters, the maximum pressure in the cylinder during one engine cycle. For the selected operating modes are carried out strength tests of the upper piston and connecting rod eye. In conclusion, the results are evaluated.
|
|
|
Two-stroke engines of road racing GP motorcycles
Opluštil, Vít ; Svída, David (referee) ; Drápal, Lubomír (advisor)
The aim of this thesis is description of two-stroke road racing motorcycles dated from first race in GP championship to present, including en explanation of next probable development in future. Thesis deals with development of particular main parts of two-stroke combustion engine over time too and its influence for modernizing two-stroke motorcycle for daily use.
|
|
|
A two stroke engine for paragliding
Šafařík, Petr ; Kaplan, Zdeněk (referee) ; Píštěk, Václav (advisor)
This diploma thesis deals with the design of a two-stroke engine for paragliding. First of all, the different types and designs of two-stroke engines are discussed. After the design of the crank mechanism, the forces in the engine are tested, followed by the strength control of selected components. In addition, the work includes design of individual engine components, propeller reducer and 3D models of components and motor unit.
|
|
|
Two-stroke compression-ignition aircraft engines
Pochop, Ladislav ; Svída, David (referee) ; Drápal, Lubomír (advisor)
This thesis is a treatise on two-stroke diesel aircraft engines. Describes the principle functions of two-stroke diesel engine, its differences from the four-stroke engine and petrol engine. It also deals with the historical development of two-stroke diesel aircraft engines in the context of the development of piston aircraft engines in general. Indicates the best-known two-stroke diesel aircraft engines and outlines possible development of this type of engines in the near future.
|
|
|
The future of gasoline two-stroke engines
Kříž, Jakub ; Komenda, Lukáš (referee) ; Mazůrek, Ivan (advisor)
My thesis deals with the historical development of two-stroke petrol engines from the very establishment of a two-stroke cycle, mapping the technological development of these engines up to present day, where, in the second half the attention is devoted to the direct comparison of two-stroke engine and a four-stroke engine in the field of ultralight aircrafts.
|
|
|
Piston group of a one-cylinder gasoline engine
Lux, Josef ; Novotný, Pavel (referee) ; Píštěk, Václav (advisor)
This thesis deals with a piston set of the internal combustion engine. The main goal is to perform strength check analysis of the internal combustion engine piston set using analytical methods of elasticity and strength. Cultivator PF-62 was chosen to determine the basic parameters of the crankshaft mechanism and plot the force distribution. Results of the strength check analysis are evaluated in the final part of this thesis.
|
|
|
Innovation of built-up crankshaft for minibike engines
Doležal, Lukáš ; Mazůrek, Ivan (referee) ; Hanuš, Stanislav (advisor)
The present diploma thesis deals with innovation of built-up crankshaft of Blata minibikes. Minibike is the type of a small two-stroke motorcycle equipped with an internal combustion engine of the volume 40 or 50 cm3. The machine is designed for racing circuits; not only for young riders but also for seniors. The innovation is in the design and verification of pressed connections in the imposition of major pins in the arms of the crankshaft. Pressed connections are designed on the basis of the analysis of force interaction on the crankshaft at maximum revolutions. The proposed solutions are verified by FEM calculations. Based on the results, the best option is selected. For the selected option, the impact of force interaction at maximum machine performance is studied. Finally, on the basis of these facts, designing, technological and economic analysis of feasibility of new production technology is carried out.
|
|
|
Analysis of the crank mechanism of a two-stroke engine
Matyáš, David ; Píštěk, Václav (referee) ; Svída, David (advisor)
This diploma thesis is a comparison of two versions of the crank mechanism of the Jawa 350 two-stroke engine. The diploma thesis if prefaced by researching the design solutions of multi-cylinder two-stroke engines with examples of their use. The following is a description of the theoretical properties of the two examined crank mechanisms in terms of inertial effects. For both engine concepts, the engine performance characteristics is measured and compared to each other. The engine with modified crankshaft is subjected to a pressure indication, which serves as one of the inputs to the strength analysis of the crankshaft. This is done by a combination of MBS simulation, FEM analysis and calculation of fatigue safety factor by LSA analytic method.
|
|
|
Trabant engine modernization
Kočka, Martin ; Ramík, Pavel (referee) ; Kaplan, Zdeněk (advisor)
The aim of this thesis is to make a list of available knowledge of the P63 engine, found in the Trabant 601 cars. Overview of its advantages and disadvantages, proposal of possible design changes, which would lead to elimination of the disadvantages, while increasing the power output of the engine. Assembly of the engine using the proposed modifications.
|
|
|
Two Stroke Engine Indirect Fuel Injection
Kovář, Michal ; Drápal, Lubomír (referee) ; Janoušek, Michal (advisor)
This diploma thesis deals with indirect fuel injection on new two-stroke engine for motocross sidecar. The purpose of this work was to design the fuel injection system together with length of the fuel injection times. To determine the fuel injection times, it was necessary to determine the complete exhaust system that affect the volumetric efficiency. The conclusions were based on research in the field of two-stroke engines and calculations determining the amount of fuel per one cycle. The injection method together with the location of the fuel injector and type of fuel injector that can be use were determined and then the injection times that can be entered in the ECU.
|
guest ::
