|
|
Modification of 3D milling machine to 3D printer
Halamíček, Lukáš ; Vetiška, Jan (referee) ; Bradáč, František (advisor)
This thesis deals with rebuilding of engraving machine to 3D printer. In the first part it describes possible 3D printing technologies and its utilizations in rebuilding. In the next section suitable parts for reconstruction are chosen and described. Then the controlling of heating bed, hot end and filament feed is realized by using software TwinCAT by company Beckhoff. Functional 3D printer should be result of this thesis.
|
|
| |
|
|
Control of manipulator model
Simon, Jakub ; Jirgl, Miroslav (referee) ; Zezulka, František (advisor)
The task was to study the physical model of the coordinate manipulator. It is controlled by two stepping motors by Schneider Electric and Beckhoff¨s industrial IPC. Then get to know the TwinCAT control software communicating on the EtherCAT network. Then revive the model and create a task to illustrate the functionality of the model with a simple ON / OFF third axis, as well as revive the industrial camera. Then create your own design of a full-fledged third axis and let it be realized. Finally, create an illustration application with the full-fledged third axis manipulator.
|
|
|
Use of the software PLC in thermal engineering of buildings
Hubený, František ; Kaczmarczyk, Václav (referee) ; Pásek, Jan (advisor)
This presenting master’s thesis deals with a problem of digitaly controled room temperature using the software PLC. The result of this work was creating of an algorithm to control temperature on the requested leve ofl setpoint, minimizing operating costs of the building. The PLC softwares from different manufacturers were analyzed and compared with conventional PLC. The testing facility was disigned and used to control the temperature in the room and data visualization. Room temperature was regulated by PS controller or two point regulator.
|
|
|
PLC simulation using TwinCat tool
Krátký, Martin ; Uher, Václav (referee) ; Mašek, Jan (advisor)
Bachelor project is about options in TwinCat 2 for programming the programmable logic controller (PLC). As part of the work will be described the principle of the PLC and PLC uses nowadays. The principe of developing tool TwinCAT will be described and an overview of the programming languages that standard IEC / EN 61131-3. The main contribution of this work is to create a program description in TwinCAT development tool in version 2. The main result will be a simulation of robotic arm created in TwinCAT version 3 and for this simulation will also be created graphical interface in Visual Studio in language C#.
|
|
| |
|
|
3D engraving milling machine
Bosák, Daniel ; Vetiška, Jan (referee) ; Bradáč, František (advisor)
This thesis deals with rebuilding of a laboratory manipulator to 3D engraving machine. First part of the thesis describes the engraving technology and lists the most common types of engraving machines. Next, the initial state of the machine is analysed and modifications of mechanical and electrical equipment are suggested. Design, realisation of a control system and human machine interface are described. The Beckhoff TwinCAT programming environment is used. The last part of the thesis deals with practical realisation and commissioning of the machine. The results of the thesis can be used as an addition for lessons of Automation of Production Machines.
|
|
|
The modernization of control system of milling machine FNG
Holas, Jiří ; Vetiška, Jan (referee) ; Bradáč, František (advisor)
This thesis deals with a proposal modernisation of control and electroinstalation of the milling machine FNG 32. The thesis is divided into several sections: The first section is dedicated to the research of the milling machine and the description of its current condition. The second section deals with possible options of retrofitting and with the components.The third section includes the technical and economical evaluation and the selection of the solution. In the next section, the selected components are described and an electronic documentation of the machine has been created in EPLAN. In the last section, a proposal of control of the milling machine has been created with the help of the TwinCAT development environment provided by Beckhoff company.
|
|
|
Design of an Experimental Robotic Cell for Manupulation Operations
Bednář, Martin ; Kubela, Tomáš (referee) ; Pochylý, Aleš (advisor)
Final thesis is focused on design of experimental workplace with industrial robots for manipulation operations, that will be used for educational and demonstrational purposes. Integration of sub-systems and workplace layout are worked out in this thesis. Key factor is so called virtual commissioning. Unique solution, which is contained within final thesis, combines several software tools for the design of robotic workplace. Static 3D model created in Autodesk Inventor Professional is imported into Tecnomatix Process Simulate, where dynamic 3D model is made – simulation model respectively. The control element is softPLC by Beckhoff company created in TwinCAT software. The connection of simulation model and control element is realized using standardized communication protocol OPC UA. This combination proved to be a cheap tool for virtual commissioning in practice, because only one personal computer is needed for the job.
|
|
|
Design of control of axis with linear motor
Chaloupka, Roman ; Bradáč, František (referee) ; Vetiška, Jan (advisor)
This thesis deals with construction, connection and control axis with linear motor. The beginning of thesis is focused on principle of functioning and characteristics of linear motors. The following part describes used components of axis, their mechanical configuration and electrical wiring. Further thesis deals with creating PLC program and user interface for control axis in TwinCAT system. In last part is dealing correct software settings of axis.
|
guest ::
