| |
|
Numerical Analysis of Influence of Electromagnetic Fields on Small Airplanes
Řezníček, Zdeněk ; Hazdra,, Pavel (referee) ; Karban,, Pavel (referee) ; Raida, Zbyněk (advisor)
This thesis deals with numerical analyses of electromagnetic fields on small aircraft with composite parts as an innovative way for assessment of their inherent protection against electromagnetic effects of outside environment in all development stages. It is concentrated for procedures of creation of geometrically and materially complex models for simulating calculations in the time as well as frequency domains, execution of the simulations itself and comparisons of results between the internal electromagnetic calculations and executed experimental tests. Achieved results were verified on a simplified reference model of aircraft's fuselage and two aircraft prototypes VUT100 and EV-55 of the company Evektor, spol. s r. o.
|
|
Model of physical layer of communication system IEEE 802.11ah
Jurák, Petr ; Staněk, Miroslav (referee) ; Polák, Ladislav (advisor)
This diploma thesis deals with the analysis of the IEEE 802.11ah wireless communication system. For such a purpose, an appropriate simulation model in program environment MATLAB is created. The first part of thesis focuses on the IEEE 802.11 standard. Basic blocks of the transmitter and receiver are described. Attention is also devoted on the brief description of considered transmission channels. The second part contains the description of the proposed and realized simulation model in MATLAB. Individual blocks of the simulation model are described in details. Finally, the obtained simulation results are evaluated and discussed.
|
|
Simulation verify the dynamic behavior of the portal machine tool
Danda, Libor ; Holub, Michal (referee) ; Vetiška, Jan (advisor)
This bachelor thesis deals with summary of simulation software for the simulation of the dynamic behavior of machines, creating a simulation model of the machine in MSC.ADAMS and experimental measurement of cutting forces. It also deals with dynamics simulations axis motion and deformation analysis of selected components of the machine. Finally, they are designed to be structural adaptations in order to increase the dynamic stability of the machine.
|
|
Simulation model of reservoir system in Dyje river basin
Buršík, Lukáš ; Kozel, Tomáš (referee) ; Menšík, Pavel (advisor)
This Bachelor’s Thesis is focused on creating a simulation model of the reservoir system in Dyje river basin. The reservoir system consists of four reservoirs: Jevišovice and Výrovice on the Jevišovka River, Vranov and Znojmo on the Dyje River. The HEC-ResSim program was chosen to create the simulation model. The simulation model is aimed at reservoir storage function and the calculation works with the daily step. Real data of individual reservoirs and real flow series of three measuring profiles are used. The first part of work deals with simulation models and reservoir functions in general. Then the used program is described in a greater detail. The second part deals with selected system of reservoirs, watercourses and measuring profiles. There can be found a description of creating the model itself in the selected program in the third part. The description is complemented by selected examples of physical data and management rules. The last fourth part is devoted to a summary of the results, which are again accompanied by selected examples.
|
|
Design of Water Supply Facilities with the Support of Simulation Software
Pešout, Jakub ; Tauš, Miloslav (referee) ; Kučera, Tomáš (advisor)
The subject of the thesis is the design of water supply facilities with the support of a simulation software. The document is a summary of representative software tools that are used to design water supply sites directly or serve as supportive programs. A short summary of the origin, primary focus, availability and market price of each tool is listed in the survey. Furthermore the individual programs are divided into four groups. The section conveys the software's ability to deal with any of the following issues: - Water quality - Hydraulic analysis and simulation of hydraulic working - Design of water network - Creation of simulation models Subsequently, three chosen programs are subjected to exemplary tests, demonstrating some of the capabilities. The first program is Watpro, on which a design of a water treatment plant is drafted and a subsequent search for the sufficient dose of chemical additives is executed. The second program Epanet 2.0 calculates a model test of a water leak from a pipeline. The result is then compared with the outcome of equation calculation. The last program is Watdis, with which the same example of pipeline leakage is calculated and subsequently compared to the Epanet 2.0 result. The work's aim is to provide an overview of the seventeen selected programs and supply the information to potential users from the ranks of designers and students.
|
|
Hydraulic calculation of sewage system in Lipůvka
Balas, Jan ; Raček, Jakub (referee) ; Hluštík, Petr (advisor)
Diploma thesis is focused on hydraulic assessment of Lipůvka´s sewer system, done by dynamic rainfall-runoff simulation model. Because of this fact, chapter about mathematical models is included. Commonly used programs to this actions are listed as well. Next part of the thesis describes monitoring campaign, which was done in Lipůvka and results are used to calibrate the simulation model. Hydraulic assessment of sewer system by this calibrated model was done.
|
|
Uncertainty estimation of reservoir storage capacity in first stage of design preparation
Oulehla, Pavel ; Paseka, Stanislav (referee) ; Marton, Daniel (advisor)
The aim of the bachelor thesis is the estimation of reservoir storage capacity uncertainty. The input uncertainty is defined by the inaccuracy of the altitude geographic data. Using the appropriate altitude measuring and the estimated errors of the measurement, the change in the area – volumes curves is described as weel as its value of uncertainty. Afterwords the storage capacity loaded by batymetric curves uncertainty is calculated. Furthermore the uncertainty of the reservoir filling height has been quantified. For these kind of calculations the reservoir simulation model has been used, Monte Carlo method, to generate random values of the batygraphic curve has been used too. Expression of uncertainties when calculating the storage capacity can help to reduction risk of storage capacity failure, respectively reduction of water shortages during reservoirs operations during critical dry periods.
|
|
Hydropower Control of Mostiště Reservoir
Bednář, Martin ; Sobek, Martin (referee) ; Menšík, Pavel (advisor)
The aim of the bachelor thesis is to propose a simplified way of controlling hydro-energetic function of the Mostiště reservoir. Controlling will be designed to maximize profit from the operation of the hydroelectric power plant and based on a simple analysis of the time course of the electricity price on the market. The proposed controlling will be simplified in the selected period using a simulation model.
|
|
Production System Simulation and Analysis
Hromková, Ivana ; Křivka, Zbyněk (referee) ; Zendulka, Jaroslav (advisor)
The work deals with creating of simulation model of production system (foundry) and its analyze. Simulation of production systems is discussed in the introduction as well as basic principles and processes during simulation model making. Next chapter describes problems arise when such type of systems are solved. Next issue about virtual fabric is discussed. Information regarding virtual fabric has been obtained from Siemens conference. Follows views of simulation tools specialized on manufacturing systems. In last one chapter is taking up of implementation of simulation system. The whole process of creating of simulation model which consists of making conceptual model, abstract model, description of model making, analysis outcomes and experimentation with simulation model.
|