|
|
Stepper motor control using CPLD
Daněk, Jan ; Kolouch, Jaromír (referee) ; Kováč, Michal (advisor)
The aim of my bachelor thesis was the control of CPLD stepper motor. To create a radio controlled antenna rotator. The controlling is done by a computer using RF circuits. The thesis includes a construction and principles of stepper motor. Basic structures of CPLD circuits were applying to create the control circuit. The possibilities of sensing the position and the data storage circuit were discussed. The control program in VHDL was implemented in development boards. The development board is connected to radio receiver circuit and the stepper motor driver. A transmitting board was connected to a personal computer or other device using RS232 interface. Printed circuit boards for transmitter and receiver circuits were created. The PC program was designed for data transmission. The program sends data and communicates via RS232 interface.
|
|
|
HF and IF circuits of shortwave radiostation
Šnajdr, Václav ; Vágner, Petr (referee) ; Lukeš, Zbyněk (advisor)
The study, description, design and implementation of selected blocks of multiband shortwave radio station are dealt with in the thesis. Focus is placed on the concept of multiband shortwave radio stations, with an emphasis on high frequency and intermediate frequency circuits. The first chapter is devoted to description of the transceiver block diagram which is designed as superheterodyne. The design of bandpass input filters, intermediate frequency crystal filters and output filters is described. Simulation results and the measured characteristics of the implemented functional blocks are presented. Furthermore, the amplifier circuits which maintain impedance matching of individual blocks are discussed. SSB signal generation in the transmitter part of radio station and final stage power amplification are depicted.
|
|
|
Design of modern propaganda: Communication of Russian Federation
Kerhart, Miroslav ; Shavit, Anna (advisor) ; Švec, Kamil (referee)
The bachelor thesis studies the nature of communication of Russian Federation. In the beginning the theoretical concepts of state-communication are defined and the key points of difference between each other are specified. In the following part of the thesis, the Russian communication is examined, based on defined theoretical concepts. To achieve this objective, direct and indirect instruments used by Russia are analysed, so is the content communicated by them. Eventually, after determination of the correct term for the Russian communication, there are shortly introduced the objectives of Russian Federation, based on inteligence reports and experts studying the Russian activities.
|
|
|
Wireless lighting control
Pilmajer, Pavel ; Novotný, Radovan (referee) ; Levek, Vladimír (advisor)
Thesis deals with the issue of lighting technology control using wireless technology. Thesis includes a description of current possibilities of control light technology, methods of digital signal transmission using radio waves and protocols dealing with this issue are described. This thesis also contains a park aimed at the selection of suitable electronic components including the design of individual electronic blocks and printed circuit board. The conclusion of the thesis is the realization of electronic modules, including the creation of module software and measurement of achieved parameters under real conditions.
|
|
|
Wireless sensor network
Beneš, Vladimír ; Pavlík, Michal (referee) ; Bohrn, Marek (advisor)
The bachelor thesis describes the design and implementation of wireless sensor network for temperature measurement. Network have to meet requirements for multi-hop network-type. That means, the sensor unit is out of the range, information about the measured temperature will be transfer between sensors. The sensor that is in range of the control unit and will have saved data from multiple sites, to transmit all the data controller. The sensors and the control unit are controlled by a microcontroller and a battery-powered for better mobility. The transfer of measurement data uses free zone for short-range devices - 433 MHz.
|
|
|
Wireless sensor network
Beneš, Vladimír ; Pavlík, Michal (referee) ; Bohrn, Marek (advisor)
The bachelor thesis describes the design and implementation of wireless sensor network for temperature measurement. Network have to meet requirements for multi-hop network-type. That means, the sensor unit is out of the range, information about the measured temperature will be transfer between sensors. The sensor that is in range of the control unit will retransmit data from multiple sites to the main device. The sensors and the control unit are controlled by a microcontroller and a battery-powered for better mobility. The transfer of measurement data uses free zone for short-range devices - 433 MHz.
|
|
|
Design and implementation of smart wiring in the apartment with visualization
Valo, Marek ; Pěcha, Jiří (referee) ; Bátora, Branislav (advisor)
This thesis deals with the classic and system wiring as well as their implementation and visualization environment for its operation. The aim of this work is to implement the project of the existing high-voltage and low-voltage wiring housing units accompanied by a design of the system wiring. This design is then fully implemented. In the beginning of the work is introduction to system wiring as such, added by a brief comparison of current systems. Followed by two chapters dealing with two selected systems for the realization of wiring. These chapters succinctly capture the essence of the system, its characteristics and features offered by each system. The last part deals with project design of wiring for the residential unit and the procedure for its commissioning. The practical part is dedicated to creating drawings with the existing power and low voltage distribution systems, the design of the smart wiring and electrical switchboard, together with possible modifications. The project documentation also discusses technical report. Finally, the selected system is tested and commissioned according to the requirements.
|
|
| |
|
| |
|
|
Ultrasound image processing
Pokorný, Vojtěch ; Harabiš, Vratislav (referee) ; Mézl, Martin (advisor)
Ultrasound is an important imaging modality used in medicine. This bachelor’s thesis includes theory regarding physical characteristics of ultrasonic waves, a brief overview of the historical development of ultrasound as an imaging modality in medicine, biophysics of spreading and biological effects of ultrasound waves on tissues and types of display final images. Next part of the thesis describes diagnostic ultrasound device, including the most common used types of ultrasound probes. This part is followed by description of animal Vevo 2100 ultrasound system from which the acquired data are processed further. Processing includes the loading, display and for DICOM files saving too. At various file formats DICOM standard comparison is done. The last chapter deals with the filtration of characteristic noise for ultrasound images called speckle.
|
guest ::
