|
|
Production of cooling cabinet
Halabrín, Marek ; Peterková, Eva (referee) ; Císařová, Michaela (advisor)
The thesis deals with presenting an assembly proposal of a cooling cabinet. The cooling cabinet is made from an austenitic steel plate of the ČSN 17 240 grade with a thickness of 1.5 millimetres. The assembly proposal is composed according to the design documentation. The number of the assembled pieces is 200. The manufacturing shall be made with the use of bending and punching. These manufacturing techniques form a part of this thesis. Finn power C5 with a nominal force of 300 kN and Trubend 5170 with a nominal force of 1700kN are the machines chosen for the manufacturing process. These are standardized machines made from a quenched steel and a steel of the 42CrMo4 type. A technological-economic evaluation comparing expenses of the manufacturing also forms a part of the thesis as well.
|
|
|
CNC Applications in Forming Processes
Pobořil, Martin ; Jopek, Miroslav (referee) ; Řiháček, Jan (advisor)
This thesis presents the study on CNC control and its usage in forming processes. It analyses the main elements which are essential for functionality of computed numerically controlled processes. It also comprises the basics of CNC programming and related software programmes. Individual technologies of forming are covered in terms of fundamental principles. Subsequently the technologies are described in relation to the CNC control – in theory and also the specific examples of machines and software programmes are given. The thesis considers advantages and disadvantages of each technology and its suitability for use in given application.
|
|
|
Production of forging piece "Spanner"
Vávra, Jan ; Kopřiva, Miloslav (referee) ; Novotný, Karel (advisor)
Projects developed within the bachelor's degree in Mechanical Engineering, presented a proposal technology forged wrench - the hot-rolled steel bars 11 523.0. The thesis also compares the past with conventional methods of production and considering the new technological process of manufacturing. Based on the literature studies about fitting and calculations, was chosen to die forging hammer KHZ 2 A (producer ŠMERAL Brno, plant Hronov), with nominal energy of 20 kJ working pressure of 16 MPa and 30 kW electric power.
|
|
| |
|
|
Design for production of lower part of charging station
Skalník, Petr ; Zavadil, Radek (referee) ; Podaný, Kamil (advisor)
This master’s thesis deals with a proposal of production technology of bottom part of charging station which is manufactured by DEL a.s. The component will be made of austenitic steel 17 349 which is 2 mm thick and its production series is 100 pieces a year. Punching and bending by MAG and TIG methods were chosen as the most suitable methods from the considered manufactoring technologies. Stud bolts will be welded by capacitor discharge. Based on the analysis of the technological calculations and the available machines in the manufacturing company was chosen that production is going to run through a punching press Pullmax 720, hydraulic CNC bending press OptiFlex 130 t 3,1 and welding sources TransPuls Synergic 3200, TransTig 1750 Puls and Nomark 65+. Technical and economical evaluation established cost calculation of semi-finished product material, welding wire, gaseous shield and stud bolts. The price of one piece is 3 117,70 Czech crowns.
|
|
|
Design of the building concrete structure
Kurpel, Juraj ; Chalabala, Jiří (referee) ; Klusáček, Ladislav (advisor)
The aim of this thesis is to design a load-bearing structure for the ultimate and serviceability limit state of a civil building. The structure is designed as a cast-in-place concrete structure, composed of columns and floor slabs. The building has total of 5 floors, two are under-ground and three above-ground. The thesis contents of a structural design and design options, structural design report for load-bearing elements, processing of the drawings, details, visualizations. Internal forces calculation is carried out in SCIA Engineer and validated by the moment accumulation method for slabs. The columns are assessed by interaction diagrams, one is verified by hand calculation. The resulting internal forces are taken from the computational programme. Foundations are not subject for solution.
|
|
|
Production of casing
Hájek, Pavel ; Podaný, Kamil (referee) ; Lidmila, Zdeněk (advisor)
This master’s project describes a proposal for manufacturing technology of a horizontal boring machine case. This case is manufactured by HESTEGO a.s. from a DC01 steel sheet, which is 2 mm thick and its production series is 200 pieces a year. Punching and bending were chosen as the most suitable methods from the considered manufacturing technologies. The theoretical part of the thesis includes a study of the chosen manufacturing technologies. Based on the analysis of the technological calculations and the available tools in the manufacturing company, a technological procedure was designed and these machines were chosen: punching machine TruPunch 5000 a servo-electronic press brake SAFAN E – BRAKE 100–3100. Technical and economical evaluation is also included in the proposal.
|
|
|
Production of Cover of Regulator Tank
Kudláč, Lukáš ; Řiháček, Jan (referee) ; Peterková, Eva (advisor)
This master’s thesis deals with suggestion of production of sheet metal cover in Limid Mohelno s.r.o. Piece serves as cover of regulation device of rail vehicles with visual function and it’s manufactured from corrosion-resistant steel ČSN 17 240 with thickness 1 mm. Esthetical impression is ensured by grinded surface K240. The master’s thesis includes literary studies and problems of chosen technologies, technological calculations and choice of machines including tools. As the best manufacturing technology was chosen punching on TruPunch 1000 and bending on press brake SafanDarley E-Brake E-100. Technical and economical evaluation was made based on selected technology and compared with another manufacturing options.
|
|
|
Design and Review of Locally Supported Ceiling Plates
Tesař, David ; Šulák, Pavel (referee) ; Švaříčková, Ivana (advisor)
The paper is focused solutions locally supported reinforced concrete floor slab above 1.NP. To solve internal forces used finite element. Results of the finite element method will be compared with results from the simplified calculation methods. Dimensioning construction will be carried out according to ČSN-EN 1992-1-1 for ultimate limit state. It will be constructed model design, structural analysis, design documentation and accompanying Report.
|
|
|
Manufacturing of nibbling parts
Moravčík, Juraj ; Peterková, Eva (referee) ; Podaný, Kamil (advisor)
This work describes principles and methods of punching starting from gradual sheering. In this work they were included advantages and disadvantages dividing punching tools of the two design, it´s revolver and cassette. There were also described of forming tools and some of their basic representatives, which are in practice often used. The two basic principles of machines have been described on the example of companies Prima Power and Trumpf.
|
guest ::
