|
|
The Fire Station Holešov
Křepelka, Jakub ; Struhala, Karel (referee) ; Manychová, Monika (advisor)
The Master’s thesis is about processing design documentation for a new bulding of firehouse type P4. Location of the bulding is chosen so the firehouse is near the industrial precinct , further to be near to the planned highway connection and city bypass so they don’t have to pass in the event of an alarm through the city. The firehouse is design as partly two-storey and partly single-storey building. On the first floor is on the north storage part with technical utility rooms. In the middle is garage for fire trucks, and on the south side of the station is hygienic and wet areas, gym and meeting room for emergency staff. On the second floor are rooms for firefighters and offices for officers. Construction system of the building is precast concrete frame with longitudinal construction system. Building envelope is due to the local architecture designed as infill wall with contact thermal insulation systém ETICS. Warm flat roof are green. In the station are placed eight firetrucks (3x CAS, DA, TZA, RZA, AŽ, NA) and 17 fireman in the one shift in three teams.
|
|
|
Production Hall in Otrokovice - Execution of Superstructure
Ševela, Ondřej ; Novotný, Michal (referee) ; Nečasová, Barbora (advisor)
The bachelor thesis deals with the solution of the technological stage of the rough superstructure of a production hall in Otrokovice. The work includes accompanying and summary technical reports, construction situation with wider transport route relationships, technical report of the closer transport relations and the coordination of the oversized transport, bill of quantities for the tackled technological phase, technological regulation for the assembly of the prefabricated skeleton, design of the mechanical assembly, control and testing plan for the tackled technological phase, work safety of the tackled technological phase, prefabricated skeleton assembly budget, and building schematics of the details, assembly and storage of prefabricated elements.
|
|
|
Engineering Hall
Olejníček, Pavel ; Párová,, Jitka (referee) ; Rusinová, Marie (advisor)
The diploma thesis deals with a new building of a single-storey production object, which is made as a precast concrete frame with a lightweight cladding. Part of the new building is also facilities for employees and its administrative staff, which is also based on precast concrete frame divided into two floors. Cladding is made as masonry with ventilated facade. The internal division of buildings is made by plasterboard partitions. The project is located in the industrial zone Košíkov near Velká Bíteš.
|
|
|
Workshop in Lukov - Execution of superstructure
Mouka, Jiří ; Novotný, Michal (referee) ; Nečasová, Barbora (advisor)
This Bachelor thesis with the solution of technological stages rough superstructure establishment in Lukov. This work includes accompanying a comprehensive technical report, the situation buildings with wider relationships routes, technical report solutions closer transport links and coordination oversized shipments, bill of quantities for solving technological processes, technological specifications for the erection of prefabricated skeleton and implementation of walling of Ytong system, organization construction for a given technological stage timetable for the installation of prefabricated skeleton, mechanical assemblies for the processes, inspection and test plans for prefabricated frame and brickwork, safety solved the technological stage of processing the selection of the lifting mechanism, the budget for the erection of prefabricated skeleton implementation of masonry work and for the realization of stairs, diagrams of construction details for mounting the skeleton diagrams and storage and transportation of prefabricated elements of the skeleton.
|
|
|
New Administrative Building in Karviná, Construction Technological Project
Toman, Marek ; Patloka, Jiří (referee) ; Šlanhof, Jiří (advisor)
The diploma thesis deals with preparation, organization and construction technology of an administrative building in Karviná. It is about new building with four above ground floor. From a design point of view, the structure is designed as a precast concrete frame. The diploma thesis contains technical report, coordinating situation with design of transport ways, time financial plan, study of the implementation of the main technological phases, concept of construction site equipment, design of machinery set, time plan with worker bilancion, material delivery plan for rough building, technical report for masonry work, inspection and test plan for masonry work, item budget with the statement of measurements and noice study for earthworks.
|
|
|
Production Hall in Černá Hora – Selected Parts of Construction-technological Project
Různar, Daniel ; Štěpán, Richard (referee) ; Motyčka, Vít (advisor)
The topic of my master's thesis are selected parts of the construction technology project Production Hall in Černá Hora with administrative part. Thesis contains engineering report, construction budget, time schedule for the whole construction, deployment of mechanisms and staff, project of construction site, study of the implementation of the main technological stages, the most appropriate construction mechanisms, routes of mechanisms, ranges and travels of mechanisms, financial and time schedule of the main building, technological specification for established pilots and montages of prefabricated skeleton, control and test plan, implementation of pilots, proposals of design of movement mechanisms, comparison of cladding of ventilated facades, skeleton assembly procedure diagrams and noise study of the construction site.
|
|
|
Cultural and educational center
Hemza, Jakub ; Manová, Ludmila (referee) ; Maceková, Věra (advisor)
My diploma thesis deals with newly-built cultural and educational centre in the city of Velké Bílovice. The project is conducted at the level of documentation for construction. Building has the Z-shaped construction plan and contains a basement with two common floors. Cultural and educational centre is based on the basement walls of concrete formwork with concrete grout. The basement masonry is followed by concrete prefabricated skeleton with a lining of ceramic fittings of therm type. Horizontal structures are made of prestressed concrete panels Spiroll. The roof is flat with extensive greenery. The main entrance is oriented to the southwest side. Entryway to the lobby is through the hall where is access to all parts of the building. In the lobby there is a reception and main staircase with an elevator. Bar, library, reading room and an office adjoins the hall on the east side. On the west side there are sanitary facilities, dressing room and multipurpose hall. Technical facilities (including room of technology) are placed in the basement. Hall with gallery and sanitary facilities are situated in the central part of the second floor. House offices are functionally separated from the rest of the floor and located on the eastern side. There are also two lecture halls which can be combined into the one single hall on the west side of the building.
|
|
|
Implementation of Production Hall in Holešov
Ševela, Ondřej ; Venkrbec, Václav (referee) ; Nečasová, Barbora (advisor)
The diploma work has been dealing with the building and technological design of a production hall in Holešov. The work includes the general and specification report, the study of main technological phases, the site plan, the technological specification solving the transportation relations and coordination of oversize transportation, time and financial schedule of the construction, material supply plan including staff review, the time schedule for pre-cast frame assembly, machinery plan including the time employment, the site plan including the drawings, technological specification of pre-cast frame assembly and of steel-fibre-reinforced floor, inspection and test plan of pre-cast concrete frame assembly, assessment of lifting mechanism, the procedure scheme of pre-cast concrete frame assembly and the cost estimate of pre-cast concrete frame.
|
|
|
Mixed-use Building in Brno, Sadova - Execution of Superstructure
Macko, Peter ; Novotný, Michal (referee) ; Nečasová, Barbora (advisor)
The subject of this bachelor thesis is the deal with technological stage of the rough superstructure of a mixed-use building in Brno. The thesis contains accompanying and summary technical reports, technological regulations for the assembly of the prefabricated skeleton and for masonry constructions. Technological regulations are attached to design of site equpiment including engineering report, checking and testing plans for the assembly of the prefabricated skeleton, time schedule, proposal of machine assemblies and assessment of lifting mechanism selection.
|
|
|
Car Showroom, Holešov
Olšáková, Klára ; Kolářová, Eva (referee) ; Kolář, Radim (advisor)
The task of the master's thesis is to elaborate a project documentation for construction works for new car showroom in Holešov. The new building is located in the cadastral territory of Všetuly. The building is designed as a two-story, detached, set on a flat plot of land. The first floor can be divided into a car showroom, technical and hygienic facilities for employees and customers, and into a car service. On the second floor, there are offices, a meeting room, an archive and hygienic facilities. The entrance to the building is oriented from the north side of the building. The car showroom is based on a foundation of pre-fabricated cup footings connected by means of pre-fabricated reinforced concrete foundation sills. The supporting system of the building consists of a prefabricated reinforced concrete skeleton. Ceramic masonry are used as infill masonry. The ceiling structures are designed as pre-stressed reinforced concrete panels. A single-arm prefabricated reinforced concrete staircase with the mezzanine connects the individual floors, which is located inside the building. The roof of the building is designed as a flat vegetation extensive roof. The building is insulated with boards made of glass mineral wool and sheathed using a ventilated facade system with cladding made of bond boards.
|
guest ::
