|
|
Construction-technological stage of the stock hall in Jiříkovice
Čačaný, Lukáš ; Bříza, Lukáš (referee) ; Mohapl, Martin (advisor)
This bachelor thesis deals with the processing of the technological stage which is the upper carcass of the storage-administrative area. In this work we deal with technical management, situation of construction, equipment of construction site, item budget, time schedule, technological progress of construction, design of machine system, control test plan and work safety of technological stage.
|
|
| |
|
|
Precast concrete frame construction
Košík, Ondřej ; Buřič, Pavel (referee) ; Šulák, Pavel (advisor)
The aim of the final thesis is to design and structural design report of selected elements of prefabricated storage hall. Processing of foundation drawing, element composition and for each designed element formwork drawing and reinforcement. It is a single-storey hall, where the main structural system consists of a transversal frame columns and prestressed girder. In this final thesis I designed and structural assessed prestressed girder, reinforced concrete purlin, roof bracing, column, grade beam and foundation pad. The calculation software Scia Engineer is used to calculate the effects of internal forces. The results are compared using a simplified method. The design and structural assessment are made according to valide standards. The designed construction complies with the limit state of ultimate and serviceability.
|
|
|
Production and storage hall Hodonín- Construction Technological Project
Klimánek, Tomáš ; Henek, Vladan (referee) ; Henková, Svatava (advisor)
This diploma thesis deals with the constructive-technological project of production and storage hall. Thesis includes the study of main part of technology phases ot the building, time schedule, financial plans, technology procedure for piles and micropiles, design of main mechanisms, concept of building site, quality control and test plans, assesses risks during the realization.
|
|
|
Design of the precast load-bearing structure of the production hall
Knespl, Vojtěch ; Čairović, Dorde (referee) ; Girgle, František (advisor)
The bachelor´s thesis is focused on the design and static calculation of selected elements of the prefabricated load-bearing structure of production hall, the development of basic drawings of the project documentation of the building and drawings of the shape and reinforcement of the solved elements in the details of the implementation documentation. Specifically, it is a T-section reinforced concrete saddle truss, rectangular columns, and headers. The thesis includes a text section that contains a description of the object, the structural system, the individual elements, loads, model, and technological construction process. Calculations were performed using Scia Engineer 21.1, IDEA StatiCa and Microsoft Excel programs.
|
|
|
Production and administrative building in the village Drásov - construction technology project
Vaculík, Zdeněk ; Valenta, Michal (referee) ; Biely, Boris (advisor)
The subject of my master's thesis is the realization of a prefabricated hall with an administrative annex in the village of Drásov. The production hall will serve as a winding and dispatch of production. The hall also includes a masonry annex, which will serve for administrative purposes and as social and hygienic facilities for employees. This thesis contains a technical report on the construction and technological project, a study of the implementation of the main technological stages of the SO 01 building and the solution of wider transport relations, including the drawing of traction curves for critical construction traffic. This work further examines the construction site equipment project, which is processed in four construction variants, including the overall location of the construction site in the area. A financial and time plan has been developed for the entire construction for all construction objects. The realization of the prefabricated hall was drawn in three drawing schemes, including material assurance of the prefabricates delivery. A detailed time plan and item budget was developed for the object. Within the work, a technological regulation was developed for the deep and surface foundations of the main object and also for the realization of the J01 pit. A control and testing plan, which was prepared for the realization of the deep foundation of the SO 01 object, follows the part of the technological specification. A safety and health protection plan, including possible risks, was also prepared for the foundation of the object. Last but not least, the phase of environmental protection during the construction works was also included. A noise study was prepared to examine the impact of construction noise on the surrounding buildings.
|
|
|
Design of prefabricated concrete hall
Cibičková, Viktória ; Chalivopulos, Paris (referee) ; Zich, Miloš (advisor)
The diploma thesis is focused on the design and assessment of a precast concrete hall. The first part of the work deals with the selection of a suitable layout solution from several proposed variants and a description of the technical solution of the object. After the load calculation, which corresponds to the nature of the building's use and climatic conditions, is followed by an assessment of selected elements of the structure, such as a typical purlin, girder, columns and foundation structures. The static assessment was determined through computational models and was accompanied by a manual simplified calculation check. The next part is devoted to creating a study of the structure's behavior. In the study, the design of several versions of the steel bracing system of the object was evaluated. The task was to choose the most suitable variant. Another goal of the study was the evaluation of the results of the global model from the nonlinear assessment through the software, as well as the evaluation of the results of the deformation caused by entering flexible supports into the computer software. In the last part, the proposed structure is demonstrated through assembly drawings, drawings of the shape and reinforcement of selected elements, drawings of assembly details, bearings and forgings. Visualizations of the object are part of the drawing documentation.
|
|
|
Spatial reinforced concrete frame of an industrial building
Matěják, Jan ; Laníková, Ivana (referee) ; Šimůnek, Petr (advisor)
This bachelor thesis deals with design of selected precast elements of a prefabricated hall. Single-nave storage hall is formed by transverse frames. The elements include main roof girder designed in two variants. The first variant is considered to be made of reinforced concrete. The second variant is designed from prestressed concrete. Other designed elements are a pair of columns carrying the girder and pocket foundations. The elements were designed according to the ČSN EN 1991-1-1. The output from this bachelor thesis are structural design reviews and drawings of selected parts (formwork and reinforcement).
|
|
|
Prefabricated reinforced concrete hall
Jakubcová, Hana ; Hrubý, Tomáš (referee) ; Požár, Michal (advisor)
The main work of the diploma thesis is a draft and a static judgement of chosen horizontal and vertical parts of prefab hall with a crane runway. The chosen parts are the girder, the column, the bracing, the foundation beam, and the foundation pad. The model for gathering of intern forces is made by the program SCIA Engineer 18.1 with the use of a bar 3D model of the whole project. The parts were judged on the ultimate limit state. The prestressed girder was judged on the ultimate limit state and the serviceability limit state.
|
|
|
Preparation for the implementation of a reinforced concrete prefabricated hall in Blansko
Vágner, Jakub ; Průcha, Aleš (referee) ; Kantová, Radka (advisor)
The subject of the bachelor's thesis is the preparation of the assembly of a reinforced concrete skeletal hall from prefabricated elements in Blansko. The work contains a technical report focusing on the assembly skeleton, situational buildings with broader transport relationships, replacement statement, technological regulation of skeleton assembly, construction organization solutions, schedule and graph of workers' needs, machine design, inspection and test plan, safety and health plan when working on the construction site, list of prefabricated elements reinforced concrete, details of connections of individual prefabricated parts, introduction diagram, Procedure of mobile crane and tractor with flatbed on the construction site.
|
guest ::
